(critical process died) BSOD / freezes and crashes

Page 3 of 9 FirstFirst 12345 ... LastLast

  1. rowow
    Posts : 58
    Windows 10
    Thread Starter
       New #21

    Ill try it agian. Better to be sure then waste $200. And what exactly do you mean "take a picture"? You mean a picture of mem86 results?
      My Computer
    Quote Quote

  3. essenbe
    Posts : 12,801
    Windows 11 Pro
       New #22

    Yes, use your cell phone or a camera. It doesn't have to be a good picture, just good enough for us to read the screen. The link for the test is above. Make sure to run memtest86+ not memtest86. The tests are very different no matter how close the names are.

    If you want to try one more clean install, disconnect all hard drives except the one you are installing Windows to. Have nothing at all connected to your computer other than the Monitor, keyboard and mouse, and the installation USB. Before starting go into BIOS and set the BIOS to optimized defaults. save an exit. No overclocks of anything. It will take longer but select to download updates during the install. Read through this to make sure everything is done right and have a copy of your personal files on external media before starting. Windows 10 - Clean Install
      My Computer
    Quote Quote

  4. rowow
    Posts : 58
    Windows 10
    Thread Starter
       New #23

    Ok, ive started memtest86+ and ill let it run all night to tomorrow (which should be 20 hours). Ill report tomorrow with a picture on how the test went. But out of curiosity what indicates that this is not a hardware problem? I just want to learn for future reference.
      My Computer
    Quote Quote

  6. essenbe
    Posts : 12,801
    Windows 11 Pro
       New #24

    I was saying that if the clean install does not work it looks like it probably is a hardware problem. There is no reason I know of that your rig cannot run Windows 10, so the issue could very likely be a hardware problem.
      My Computer
    Quote Quote

  7. rowow
    Posts : 58
    Windows 10
    Thread Starter
       New #25

    Done 9 passes, 0 errors. Attached photo to this reply in a compressed zip file (otherwise the uploading page just crashes)
      My Computer
    Quote Quote

  8. essenbe
    Posts : 12,801
    Windows 11 Pro
       New #26

    What CPU Temp monitoring program do you use? Your CPU temps look a little high, especially for memtest.

    Attachment 118980
      My Computer
    Quote Quote

  9. rowow
    Posts : 58
    Windows 10
    Thread Starter
       New #27

    essenbe said:
    What CPU Temp monitoring program do you use? Your CPU temps look a little high, especially for memtest.

    Attachment 118980
    I monitor it through open hardware monitor.
    What temperature is it normally supposed to be at?
      My Computer
    Quote Quote

  10. essenbe
    Posts : 12,801
    Windows 11 Pro
       New #28

    I'm not sure about your CPU, but mine runs memtest and finishes around 38°C. What CPU Cooler do you have. What temps do you get when you game or something stressful on your CPU?
      My Computer
    Quote Quote

  12. rowow
    Posts : 58
    Windows 10
    Thread Starter
       New #29

    Should I try under clocking the CPU to make it run slower?
      My Computer
    Quote Quote

  13. essenbe
    Posts : 12,801
    Windows 11 Pro
       New #30

    No, if you are overclocking, stop. If you are running stock, leave it like it is. What are the answers from the post above?
      My Computer
    Quote Quote

 

  Related Discussions
BSOD critical process died
in BSOD Crashes and Debugging

Dear all, Thank you for reading this. Recently I've been getting a lot of BSOD's. To be more specific the "critical_process_died" one stuck at 0% so no dump file. I did my fair amount of searching on the internet and i tried just about everything...
BSOD - Critical Process Died
in BSOD Crashes and Debugging

Hi, could anyone check on my BSOD logs? I get the feeling it might be a hardware issue as I have reinstalled OS multiple times already and it still occurs. Thanks! BSOD sometimes shows CRITICAL_PROCESS_DIED. Though I do notice sometimes it showed...
Critical Process Died BSOD
in BSOD Crashes and Debugging

In the last two weeks my laptop has started intermittently crashing with no clear pattern. I used SFC to replace a corrupted file from an .iso, but I'm still getting crashes and can't make sense of the error codes. I had a secondary HD die on me...
Critical Process Died BSOD
in BSOD Crashes and Debugging

​47563 I have recently updated to Windows 10 and have been getting the BSOD which says Critical Process Died. I have done all of the recent updates on my drivers and for Windows 10. I have also attached my crash file. It will only crash during...
Loading Dump File Kernel Bitmap Dump File: Kernel address space is available, User address space may not be available. ************* Symbol Path validation summary ************** Response Time (ms) Location...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 18:42.
Find Us




Windows 10 Forums