BSOD IRQL NOT LESS OR EQUAL playing DayZ and Voxal Voice Changer

Attachment 118134

I've ran into this problem, only while doing these two things, and would really appreciate someone to help me out on this one or diagnose the issue. I am open to sending you more information if you need it.
-Windows 10 64bit
-Windows 10 home 1607
-14393.693
-Intel i5-6500 CPU
-8GB of RAM
-Radeon RX 470 (MSI) graphics card

Have you tried updating the Voxal Voice Changer driver? It is mentioned in the crash analysis as a possible cause. Your driver is dated Mar 2016 but I could not tell from their website if there is a more recent driver.

Code:

BugCheck A, {28, 2, 0, fffff8032a796759}

*** WARNING: Unable to verify timestamp for voxaldriverx64.sys
*** ERROR: Module load completed but symbols could not be loaded for voxaldriverx64.sys
Probably caused by : memory_corruption

I don't think its anything outdated, as I installed the newest version about a week ago, I more or less wanted to see if there was a link between this and DayZ, with DayZ being my biggest concern
Thanks!

Attachment 118359

philc43 said:

Have you tried updating the Voxal Voice Changer driver? It is mentioned in the crash analysis as a possible cause. Your driver is dated Mar 2016 but I could not tell from their website if there is a more recent driver.

Code:

BugCheck A, {28, 2, 0, fffff8032a796759}

*** WARNING: Unable to verify timestamp for voxaldriverx64.sys
*** ERROR: Module load completed but symbols could not be loaded for voxaldriverx64.sys
Probably caused by : memory_corruption

Could you help with DayZ? I've added a fresh dump file from recent DayZ crashes with the same error at the top of this post.

Memory corruption is still being suggested as a probable cause. No drivers are showing up as problematic apart from a mention of BEDaisy.sys failing to load properly in one of the threads. This is an anti-cheat driver for Battle Eye. Remove it if you no longer need it.

We should at least eliminate that your RAM is not contributing to this error.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

OK, thanks for running the memory test. It looks like we can rule that out. The BEDaisy.sys and its connection with DayZ could be the root cause. Is there any way you can reinstall that component or perhaps do a search on Google to see if it has been identified as a problem for other gamers?

philc43 said:

OK, thanks for running the memory test. It looks like we can rule that out. The BEDaisy.sys and its connection with DayZ could be the root cause. Is there any way you can reinstall that component or perhaps do a search on Google to see if it has been identified as a problem for other gamers?

That driver is embedded within BEService.exe and BEService_x64.exe which are both in my battle eye folder, DayZ downloaded x64 and the older regular version for all of its files, could this be a problem?

This is not something I am able to advise on, maybe you would get better help from the games section or from a DayZ forum. Meanwhile we can monitor any further BSOD events you may get and see if the cause is consistent.