Windows 10: Been getting a decent amount of BSOD

Page 1 of 2 12 LastLast
  1.    03 Jan 2017 #1

    Been getting a decent amount of BSOD


    Over the past couple of months I have gotten some BSOD. I ended up reformatting my computer to see if that helped but unfortunately it continued. I have no clue really what exactly is causing it and don't really know how to read bluescreen viewer. Any help would be great.

    edit: ill be heading to sleep for the night but will look at replies in morning
    Been getting a decent amount of BSOD Attached Files
    Last edited by tigerman151; 12 Jan 2017 at 01:49.
      My ComputerSystem Spec

  2.    03 Jan 2017 #2

    Wanted to add a bit more detail. I have gotten the BSOD the past couple times during a game of League of Legends(most recent BSOD), during Minecraft mod pack, and after closing minecraft modpack. The first Bluescreen from 1/2/17 I was away from my computer but had closed minecraft curse launcher beforehand.

    I got some new Memory back in September. I had a bit of a problem when installing it. At first I put in both new sticks in the slots that the previous sticks were in, for dual channel those were the slots I wanted. My computer refused to start, as if the RAM was bad. I took one out, and the computer started up just fine. Shut down and tried both again, and computer once again refused. So I tried with one 8GB and one of the old 4GB sticks. Computer starts fine, reset, tried both 8GB and it starts fine and registers the 16GB of RAM. So I have a slight suspicion it could be related to this. However, I also recently swapped out a hard drive for a new 1 TB ssd, back in November. (Which is part of why I just reformatted in November). While i don't think the SSD would be the cause, I figured knowing about the RAM and SSD would probably help.

    I will update this thread again if it happens again.
      My ComputerSystem Spec

  3.    04 Jan 2017 #3

    The dumpfile of 24 december could point to network related problems.(netio, Tcpip,Ndu=Windows network data in the stack text)
    Code:
     BugCheck 139, {3, ffffa4800c46c490, ffffa4800c46c3e8, 0}
    
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+1067 )
    
    Followup: Pool_corruption
    ---------
    
    0: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    KERNEL_SECURITY_CHECK_FAILURE (139)
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    Arguments:
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffa4800c46c490, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffa4800c46c3e8, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    
    Debugging Details:
    ------------------
    
    
    TRAP_FRAME:  ffffa4800c46c490 -- (.trap 0xffffa4800c46c490)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffb6027cd34010 rbx=0000000000000000 rcx=0000000000000003
    rdx=ffffb6027dea6a80 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff801206dd807 rsp=ffffa4800c46c620 rbp=0000000000000000
     r8=ffffb6027ea28200  r9=ffffb60276194560 r10=0000000000000000
    r11=ffffb6027f1d6980 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na po cy
    nt!ExDeferredFreePool+0x1067:
    fffff801`206dd807 cd29            int     29h
    Resetting default scope
    
    EXCEPTION_RECORD:  ffffa4800c46c3e8 -- (.exr 0xffffa4800c46c3e8)
    ExceptionAddress: fffff801206dd807 (nt!ExDeferredFreePool+0x0000000000001067)
       ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
      ExceptionFlags: 00000001
    NumberParameters: 1
       Parameter[0]: 0000000000000003
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    
    BUGCHECK_STR:  0x139
    
    PROCESS_NAME:  System
    
    CURRENT_IRQL:  2
    
    ERROR_CODE: (NTSTATUS) 0xc0000409 - Er is een bufferoverschrijdingsfout opgetreden voor stack-buffer in deze toepassing. Via deze overschrijdingsfout kan een kwaadwillige gebruiker de controle over deze toepassing verkrijgen.
    
    EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - Er is een bufferoverschrijdingsfout opgetreden voor stack-buffer in deze toepassing. Via deze overschrijdingsfout kan een kwaadwillige gebruiker de controle over deze toepassing verkrijgen.
    
    EXCEPTION_PARAMETER1:  0000000000000003
    
    ANALYSIS_VERSION: 6.3.9600.17336 (debuggers(dbg).150226-1500) x86fre
    
    EXCEPTION_STR:  0x0
    
    LAST_CONTROL_TRANSFER:  from fffff801205e4829 to fffff801205d96f0
    
    STACK_TEXT:  
    ffffa480`0c46c168 fffff801`205e4829 : 00000000`00000139 00000000`00000003 ffffa480`0c46c490 ffffa480`0c46c3e8 : nt!KeBugCheckEx
    ffffa480`0c46c170 fffff801`205e4b90 : 00000000`00000000 ffffc8db`013fc578 ffffb602`7ac0b6c8 000049fd`85f03fd8 : nt!KiBugCheckDispatch+0x69
    ffffa480`0c46c2b0 fffff801`205e3b73 : 00000001`ffffffff fffffff6`00000008 05e82024`00000005 6c880fc0`00000004 : nt!KiFastFailDispatch+0xd0
    ffffa480`0c46c490 fffff801`206dd807 : ffffb602`76269230 fffff804`cf562e4c fffff804`cf5765a0 fffff804`cf5b32a4 : nt!KiRaiseSecurityCheckFailure+0xf3
    ffffa480`0c46c620 fffff801`206db86d : ffffb602`7eb4ed00 fffff801`207c8540 fffff801`207c8540 00000000`00000000 : nt!ExDeferredFreePool+0x1067
    ffffa480`0c46c6a0 fffff804`d300412d : ffffb602`7c5bcdf0 fffff804`cdc70c40 00000000`00000010 00000000`00000015 : nt!ExFreePoolWithTag+0x86d
    ffffa480`0c46c780 fffff804`d30040fe : ffffb602`7e9cc6b0 ffffb602`7d2b9040 ffffb602`7e6c9260 fffff804`d3003f02 : Ndu!CarFreeCacheAwareReference+0x15
    ffffa480`0c46c7b0 fffff804`d3004018 : ffffb602`7ddd9800 fffff804`d3003ef7 ffffb602`7ea2fb90 fffff804`cef0dd05 : Ndu!NduDeleteFlowContext+0x2a
    ffffa480`0c46c7e0 fffff804`d3003f9d : ffffb602`7e9cc6b0 00000000`00000310 ffffb602`7ea2fa20 fffff804`cef1050a : Ndu!NduDereferenceFlowContext+0x48
    ffffa480`0c46c820 fffff804`cd094dfb : ffffb602`756e5ac0 fffff804`d3003f10 ffffb602`7d2b9040 00000000`00000000 : Ndu!NduFlowDelete+0x8d
    ffffa480`0c46c850 fffff804`cd094b3e : ffffb602`7d00ff02 ffffb602`7d2b9040 ffffa480`0c46c9f0 ffffa480`0c46c9f0 : NETIO!WfpProcessFlowDeleteFast+0xc3
    ffffa480`0c46c890 fffff804`cdae69e5 : 00000000`0000ff00 00000000`00000000 ffffa480`0c46c9f0 ffffb602`7d44c870 : NETIO!KfdAleNotifyFlowDeletion+0x12e
    ffffa480`0c46c8f0 fffff804`cd092c9c : ffffb602`7bc658d0 ffffb602`7bc658d0 fffff804`cdc71540 ffffb602`75ff0e60 : tcpip!TcpCleanupTcbWorkQueueRoutine+0x205
    ffffa480`0c46cac0 fffff801`204e3d11 : ffffb602`76ce5fa0 ffffb602`79102ca0 ffffb602`79102ca0 00000000`00000000 : NETIO!NetiopIoWorkItemRoutine+0x3c
    ffffa480`0c46cb10 fffff801`205261b9 : fffff801`2084c100 ffffb602`7dc01800 fffff801`204e3c90 80000013`00000000 : nt!IopProcessWorkItem+0x81
    ffffa480`0c46cb80 fffff801`20491729 : 00000000`00000000 00000000`00000080 ffffb602`756ee6c0 ffffb602`7dc01800 : nt!ExpWorkerThread+0xe9
    ffffa480`0c46cc10 fffff801`205debb6 : ffffa480`05bcf180 ffffb602`7dc01800 fffff801`204916e8 fffff801`2057386a : nt!PspSystemThreadStartup+0x41
    ffffa480`0c46cc60 00000000`00000000 : ffffa480`0c46d000 ffffa480`0c467000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    Looking through your windows modules:
    mt7612US Wed Dec 09 07:44:11 2015
    This driver belongs to your Xbox Wireless Adapter for Windows

    rtl8192se Wed Mar 27 16:13:24 2013
    Driver Description: Realtek Wireless LAN 802.11n PCI-E NIC NT Driver
    Driver Update Site: Realtek

    Update these drivers if possible.

    Also i found this driver from 2010, might not be compatible with windows 10
    vrtaucbl Mon Feb 15 18:07:10 2010
    Driver Description: Virtual Audio Cable (WDM)
    Driver Update Site: Ventrilo - Download
      My ComputerSystem Spec

  4.    04 Jan 2017 #4

    lifetec said: View Post
    Looking through your windows modules:
    mt7612US Wed Dec 09 07:44:11 2015
    This driver belongs to your Xbox Wireless Adapter for Windows

    rtl8192se Wed Mar 27 16:13:24 2013
    Driver Description: Realtek Wireless LAN 802.11n PCI-E NIC NT Driver
    Driver Update Site: Realtek

    Update these drivers if possible.

    Also i found this driver from 2010, might not be compatible with windows 10
    vrtaucbl Mon Feb 15 18:07:10 2010
    Driver Description: Virtual Audio Cable (WDM)
    Driver Update Site: Ventrilo - Download
    I went ahead and uninstalled the Virtual Audio Cable. I am not seeing any drivers for the RTL8192SE on realtek's website. I don't connect to that card typically. Its a wifi card that I bought and have installed for the few times I bring my computer somewhere that doesn't allow for me to have a wired connection. If that is a cause of this, then should I just remove the Wifi card and only keep it in when I NEED to use it? Alternatively, would just disabling the card work?

    Almost forgot to say thank you, and I will update if I run into any more problems.
      My ComputerSystem Spec

  5.    12 Jan 2017 #5

    Hello again, just updating the thread from last week. I just got another Blue Screen, first since last week. I have an updated zip attached to this and I will update the main post with it as well.

    This time I was trying to figure out why I couldn't stream to Beam for my friends to watch me play some Shovel Knight. Then all of a sudden it just went out, so I am not sure if maybe something there caused it or what. I RMA'd my RAM and have a new set in from yesterday, but I am not going to jump and say its that quite yet. Hoping maybe someone has an idea. I

    Thanks and hopefully this gets figured out fast.
    Been getting a decent amount of BSOD Attached Files
      My ComputerSystem Spec

  6.    12 Jan 2017 #6

    The last dump is
    Code:
      BugCheck 139, {3, fffff802202ab140, fffff802202ab098, 0}
    
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+1067 )
    
    Followup: Pool_corruption
    ---------
    
    0: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    KERNEL_SECURITY_CHECK_FAILURE (139)
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    Arguments:
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: fffff802202ab140, Address of the trap frame for the exception that caused the bugcheck
    Arg3: fffff802202ab098, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    
    Debugging Details:
    ------------------
    
    
    TRAP_FRAME:  fffff802202ab140 -- (.trap 0xfffff802202ab140)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffe50af4fd5010 rbx=0000000000000000 rcx=0000000000000003
    rdx=ffffe50ae9003a60 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8021e053807 rsp=fffff802202ab2d0 rbp=0000000000000000
     r8=ffffe50af0307010  r9=ffffe50af1184d50 r10=0000000000000001
    r11=ffffe50ae9003a40 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na po cy
    nt!ExDeferredFreePool+0x1067:
    fffff802`1e053807 cd29            int     29h
    Resetting default scope
    
    EXCEPTION_RECORD:  fffff802202ab098 -- (.exr 0xfffff802202ab098)
    ExceptionAddress: fffff8021e053807 (nt!ExDeferredFreePool+0x0000000000001067)
       ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
      ExceptionFlags: 00000001
    NumberParameters: 1
       Parameter[0]: 0000000000000003
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    
    BUGCHECK_STR:  0x139
    
    PROCESS_NAME:  System
    
    CURRENT_IRQL:  2
    
    ERROR_CODE: (NTSTATUS) 0xc0000409 - Er is een bufferoverschrijdingsfout opgetreden voor stack-buffer in deze toepassing. Via deze overschrijdingsfout kan een kwaadwillige gebruiker de controle over deze toepassing verkrijgen.
    
    EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - Er is een bufferoverschrijdingsfout opgetreden voor stack-buffer in deze toepassing. Via deze overschrijdingsfout kan een kwaadwillige gebruiker de controle over deze toepassing verkrijgen.
    
    EXCEPTION_PARAMETER1:  0000000000000003
    
    ANALYSIS_VERSION: 6.3.9600.17336 (debuggers(dbg).150226-1500) x86fre
    
    DPC_STACK_BASE:  FFFFF802202B2FB0
    
    EXCEPTION_STR:  0x0
    
    LAST_CONTROL_TRANSFER:  from fffff8021df5a829 to fffff8021df4f6f0
    
    STACK_TEXT:  
    fffff802`202aae18 fffff802`1df5a829 : 00000000`00000139 00000000`00000003 fffff802`202ab140 fffff802`202ab098 : nt!KeBugCheckEx
    fffff802`202aae20 fffff802`1df5ab90 : ffffe50a`00000001 fffff80f`5fd16178 0000009a`00000000 ffffe50a`00009ff2 : nt!KiBugCheckDispatch+0x69
    fffff802`202aaf60 fffff802`1df59b73 : 00000000`00000000 fffff80f`5f1d40cc 00000000`00000d30 00000000`0034277f : nt!KiFastFailDispatch+0xd0
    fffff802`202ab140 fffff802`1e053807 : ffffe50a`f55c6010 fffff802`202ab3d9 ffffe50a`f0c00000 fffff80f`61528fdf : nt!KiRaiseSecurityCheckFailure+0xf3
    fffff802`202ab2d0 fffff802`1e05186d : ffffe50a`f3c4d0b0 fffff802`1e13e540 fffff802`1e13e540 00000000`00000000 : nt!ExDeferredFreePool+0x1067
    fffff802`202ab350 fffff802`1de40cba : ffffe50a`f2e97c00 00000000`c0000120 ffffe50a`f2e97c00 fffff80f`00000003 : nt!ExFreePoolWithTag+0x86d
    fffff802`202ab430 fffff802`1de63ba2 : ffffe50a`f0b8fab0 fffff802`202ab519 ffffe50a`ef3b53b0 ffffe50a`f0b8fee3 : nt!IopUnloadSafeCompletion+0x5e
    fffff802`202ab460 fffff80f`5be46907 : ffffe50a`f13f9240 ffffe50a`f0b8fab0 00000000`00000002 ffffe50a`ef3c3450 : nt!IopfCompleteRequest+0x112
    fffff802`202ab580 fffff80f`5be43190 : ffffe50a`00000001 fffff80f`00000000 ffffe50a`f0327c02 ffffe50a`00000002 : Wdf01000!FxRequest::CompleteInternal+0x247 [d:\rs1\minkernel\wdf\framework\shared\core\fxrequest.cpp @ 871]
    fffff802`202ab630 fffff80f`614ba522 : ffffe50a`f0327cb0 ffffe50a`f0327b10 ffffe50a`efeb8b80 ffffe50a`f0327cb0 : Wdf01000!imp_WdfRequestComplete+0x90 [d:\rs1\minkernel\wdf\framework\shared\core\fxrequestapi.cpp @ 436]
    fffff802`202ab690 fffff80f`614aaeaa : ffffe50a`f0327cb0 00000000`00000008 ffffe50a`ef3b9500 ffffe50a`f0327d30 : USBXHCI!Bulk_Transfer_CompleteCancelable+0x173ae
    fffff802`202ab6f0 fffff80f`614aaa79 : 00000000`000004c0 ffffe50a`ef3b94e0 00000000`00000004 fffff802`1de69756 : USBXHCI!Bulk_ProcessTransferEventWithED1+0x2ba
    fffff802`202ab7a0 fffff802`1de69281 : ffffffff`fffffffe 0000e3b3`897bb194 fffff802`202ab990 fffff802`1e147180 : USBXHCI!Interrupter_WdfEvtInterruptDpc+0x759
    fffff802`202ab890 fffff802`1de6867f : 00000000`00000000 00000000`00000000 00000000`00140001 00000000`00000000 : nt!KiExecuteAllDpcs+0x2b1
    fffff802`202ab9e0 fffff802`1df5277a : 00000000`00000000 fffff802`1e147180 fffff802`1e1c2940 ffffe50a`f0a23800 : nt!KiRetireDpcList+0x5df
    fffff802`202abc60 00000000`00000000 : fffff802`202ac000 fffff802`202a6000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a
    As you can see in the stacktext the USBXHCI is mentioned.

    This could point to a usb related problem.

    You have installed
    vuhub Fri Nov 16 16:31:13 2007
    Usb network gate there is a new version 7 with windows 10 compatibility What’s New in This Version – Windows | KB

    In the WER there are many
    +++ WER1 +++:
    Fault bucket , type 0

    Event Name: PnPRequestAdditionalSoftware

    Response: Not available

    Cab Id: 0



    Problem signature:

    P1: x64

    P2: HID\VID_28DE&PID_1142&REV_0001&MI_03

    P3: 10.0.0.0

    P4: 0409

    P5: input.inf

    P6: *

    P7:

    P8:

    P9:

    P10:
    Looks this is a Steam controller ?
    Look for newer drivers or as a test uninstall it and see what happens.

    In the driver list i found
    usbaud64 Tue Sep 02 10:36:58 2014
    Description: Speakers (RIG Dolby Game Audio)
    Default Sound Playback: Yes
    Default Voice Playback: Yes
    Hardware ID: USB\VID_047F&PID_C030&REV_0117&MI_03
    Manufacturer ID: 1
    Product ID: 100
    Type: WDM
    Driver Name: usbaud64.sys
    Driver Version: 1.31.0035.0000 (English)
    Driver Attributes: Final Retail
    WHQL Logo'd: Yes
    Date and Size: 9/9/2014 12:00:00 AM, 1915072 bytes
    Other Files:
    Driver Provider: Plantronics, Inc.
    Look if there are newer drivers.

    Do you have any other USB devices connected when the BSOD appears?

    edit.
    Looking through your windows modules:
    mt7612US Wed Dec 09 07:44:11 2015
    This driver belongs to your Xbox Wireless Adapter for Windows
    Is this device also usb connected?
      My ComputerSystem Spec

  7.    12 Jan 2017 #7

    lifetec said: View Post
    The last dump is
    As you can see in the stacktext the USBXHCI is mentioned.

    This could point to a usb related problem.

    You have installed
    vuhub Fri Nov 16 16:31:13 2007
    Usb network gate there is a new version 7 with windows 10 compatibility What’s New in This Version – Windows | KB
    I don't honestly know what USB Network gate is, and I don't see it on control panel to uninstall or exactly what it does.
    lifetec said: View Post
    Looks this is a Steam controller ?
    Look for newer drivers or as a test uninstall it and see what happens.
    I did actually just put plug in my steam controller for the first time in a while, but I don't see drivers or anything to update. The firmware for the controller is supposedly up to date, at least it doesn't prompt me to update when opening up big picture mode several times. As for the RIG Audio, I have the latest drivers for that already installed. I double checked to make sure, and it is indeed the latest.

    lifetec said: View Post
    Do you have any other USB devices connected when the BSOD appears?

    Is this device also usb connected?
    Outside of my Keyboard/Mouse, that is the only other device I have connected to my computer. Perhaps maybe this was a conflict between the steam adapter and the xbox controller adapter?

    Edit: For clarification, I have my Xbox Adapter, Mouse, and Keyboard all plugged into the motherboard directly. My RIG headset is plugged into the front of my case, as was the steam controller adapter.
      My ComputerSystem Spec

  8.    12 Jan 2017 #8

    Outside of my Keyboard/Mouse, that is the only other device I have connected to my computer. Perhaps maybe this was a conflict between the steam adapter and the xbox controller adapter?
    I did actually just put plug in my steam controller for the first time in a while
    This might be the case, also because of the Pool_corruption named in the dumpfile.

    Background info on pool corruption
    Pool is kernel mode memory used as a storage space for drivers.* Pool is organized in a similar way to how you might use a notepad when taking notes from a lecture or a book.* Some notes may be 1 line, others may be many lines.* Many different notes are on the same page.
    *
    Memory is also organized into pages, typically a page of memory is 4KB.* The Windows memory manager breaks up this 4KB page into smaller blocks.* One block may be as small as 8 bytes or possibly much larger.* Each of these blocks exists side by side with other blocks.
    Because many pool allocations are stored in the same page, it is critical that every driver only use the space they have allocated.* If DriverA uses more space than it allocated they will write into the next driver’s space (DriverB) and corrupt DriverB’s data.* This overwrite into the next driver’s space is called a buffer overflow.* Later either the memory manager or DriverB will attempt to use this corrupted memory and will encounter unexpected information.* This unexpected information typically results in a blue screen.
    source: Understanding Pool Corruption Part 1 – Buffer Overflows – Ntdebugging Blog
    *
    What happens if you also put the steamcontroller in the mobo usb ports in the back?
    Has your system different USB ports back and front ( usb 1, usb 2 or usb 3 ports etc.)
    Often the back usbports have more power, look for info in your mobo manual.
      My ComputerSystem Spec

  9.    12 Jan 2017 #9

    I'll try out using the back ports for my controller and the headset.

    My case is the HAF 912, the front two USB ports are USB 2, or at least I think they are. I know for a fact they are not USB 3.0. The Motherboard has 2 "Gaming" Usb ports that are USB 2, two that are USB 3, and I just now realized it has 2 that are dedicated for USB Audio (USB 3).

    I will switch to using those ports for these devices and see if that fixes my problems. If you figure out something else that might help, let me know. I'll report back in the event that I get another BSOD. Again thanks for helping.
      My ComputerSystem Spec

  10.    12 Jan 2017 #10

    Okay well this is very very unfortunate and bad timing. I am needing to head to sleep. I have encountered a serious issue that my computer just constantly blue screen with error "system thread exception not handled" what happens is my computer logs in and then while windows is all loading it just loops into the blue screen. I am going to shut it down for tonight and hopefully figure this out tomorrow morning while not so tired.

    For the record, I tried seeing if it was my USB cables causing this by booting without them plugged in, outside of the keyboard, but it still caused the blue screen.


    EDIT 6:12 PST 1/12/2017 - Got my computer back up and running. I believe the Blue Screen Loop was due to me doing the wrong setting on Driver Verifier. Everything seems good for now. No Blue Screens since that time.
    Last edited by tigerman151; 12 Jan 2017 at 21:14.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Solved Installed RAM amount error. in PC Custom Builds and Overclocking
Why does my system information show 32 GB of RAM when I actually have 64 GB installed? Thank you for the help.
I have a HP slimline desktop 260-p009. I tried going into the BIOS but couldn't find anything there. Not sure what to do. I have 128.0 MB of dedicated ram right now. Specs are: Windows 10 Home 64 Intel® Core™ i3-6100T with Intel® HD Graphics...
I have two PC running Windows 10. Both installation were done around 1 Year Back and both are routinely updated. Both were upgraded form Win 7 Professional. One thing is strange that there is a difference of around 8 GB of space used in their...
Hello Guys, So i was trying to install a new language on my laptop. and i downloaded the language file which is a RAR folder then i extracted it directly to OS(C:) the problem is i got a super huge amount of folders and files extracted there ...
Hi, Is there anyway to limit the amount of Virtual Desktops allowed in Windows 10 so far? I know that in Ubuntu which has had the Virtual Desktops feature enabled in it's OS for a very long time allows you to do so, mostly for lower end PC's...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:44.
Find Us