Windows 10: BSOD and crashes. Errors 0x1000007E, 0x7E, 0x12B, 0x3B.

  1.    05 Dec 2016 #1

    BSOD and crashes. Errors 0x7E, 0x12B, 0x3B.


    Hey all,

    I built this computer about 2 years ago, it had a problem a year ago where the motherboard failed on me so I replaced it. Now I think I have another hardware problem. I've reinstalled Windows 3 times now this past month, still constantly getting blue screens/restarts/screen freezes on me. I've ran the Windows Memory Diagnostic tool, which told me hardware problems were detected. This leads me to believe it is the RAM. I've tested both sticks by taking one out and letting the other run, didn't notice anything out of the ordinary.

    Not sure what to do from here, I have a general understanding of putting computers together but I've never been able to single out hardware problems. If anyone has any spare time to take a look at this for me, thanks!
    BSOD and crashes. Errors 0x1000007E, 0x7E, 0x12B, 0x3B. Attached Files
    Last edited by rek0nn; 05 Dec 2016 at 12:52.
      My ComputerSystem Spec

  2.    05 Dec 2016 #2

    two dumpfiles point to memory problems
    Code:
     *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 12B, {ffffffffc00002c4, b4a, bf14980, ffffb08092a6b000}
    
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    Probably caused by : memory_corruption
    
    Followup: memory_corruption
    ---------
    
    0: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    FAULTY_HARDWARE_CORRUPTED_PAGE (12b)
    This bugcheck indicates that a single bit error was found in this page.  This is a hardware memory error.
    Arguments:
    Arg1: ffffffffc00002c4, virtual address mapping the corrupted page
    Arg2: 0000000000000b4a, physical page number
    Arg3: 000000000bf14980, zero
    Arg4: ffffb08092a6b000, zero
    Memory Test.
    Please start with diagnosing the system RAM first. You can use the free tool "Memtest86+" to stress test the RAM.

    How to run "Memtest" - RAM - Test with Memtest86+ - Windows 7 Help Forums
    MemTest86+ - Test RAM - Windows 10 Forums
    Make sure you are using the latest version 5.01 - Memtest86+ - Advanced Memory Diagnostic Tool

    You can stop the test even if a single error is found during the test. Otherwise continue the test for 8-10 passes and post a screenshot with next reply. 8 passes is the recommended bare minimum but more passes will give better result.
      My ComputerSystem Spec

  3.    09 Dec 2016 #3

    I was finally able to run memtest yesterday. I was expecting errors but got none, got 10 passes over the course of 21 hours.

    Imgur: The most awesome images on the Internet - those are my results
      My ComputerSystem Spec

  4.    09 Dec 2016 #4

    The last dumpfiles of 5 december is:
    Code:
     BugCheck 1000007E, {ffffffffc0000005, fffff80f05e2adda, ffffbc017531d7a8, ffffbc017531cfd0}
    
    Probably caused by : dxgmms2.sys ( dxgmms2!VidSchiSwitchContextWithCheck+26a )
    Usual causes:* Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control,

    Your AMD gpu drivers are from september update to latest version.
    Your Realtek audiodrivers are from 2015, see for a newer version

    Your Bios version is 0601 from 2014, the latest version is 1503 from 2016/04/08 with improve system stabilty.

    Supportpage https://www.asus.com/support/Downloa...0S3THbIb3N/45/
      My ComputerSystem Spec

  5.    11 Dec 2016 #5

    So I was able to update my bios today and all those drivers, I just had another bsod with error code 0x3B. Like you said in usual causes, could this possibly be my grahpics that is throwing up all these errors? I'm starting to think I should just use my on board graphics and go from there.
    BSOD and crashes. Errors 0x1000007E, 0x7E, 0x12B, 0x3B. Attached Files
      My ComputerSystem Spec

  6.    12 Dec 2016 #6

    The last dumpfile is another one as the one that pointed to dxgmmm2.sys
    So i would wait with onboard graphic.

    Code:
      bugCheck 3B, {c0000005, fffff8018f0ec948, ffff9d813eb6edd0, 0}
    
    Probably caused by : memory_corruption
    
    Followup: memory_corruption
    ---------
    
    3: kd> !analyze -v
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    SYSTEM_SERVICE_EXCEPTION (3b)
    An exception happened while executing a system service routine.
    Arguments:
    Arg1: 00000000c0000005, Exception code that caused the bugcheck
    Arg2: fffff8018f0ec948, Address of the instruction which caused the bugcheck
    Arg3: ffff9d813eb6edd0, Address of the context record for the exception that caused the bugcheck
    Arg4: 0000000000000000, zero.
    PROCESS_NAME:  chrome.exe
    First update this driver rt640x64 Tue May 05 18:21:03 2015 Realtek lan driver from your supportpage.
    iI this not stop the bsod.

    Then
    SFC
    Use SFC to check and repair windows systemfiles.

    See this tutorial SFC /SCANNOW Command - Run in Windows 8
    SFC Command - Run in Windows 10 - Windows 10 Tutorials
    Note
    If SFC could not fix something, then run the command again to see if it may be able to the next time. Sometimes it may take running the sfc /scannow command 3 times restarting the PC after each time to completely fix everything that it's able to.

    If not, then run the Dism /Online /Cleanup-Image /RestoreHealth command to repair any component store corruption, restart the PC afterwards, and try the sfc /scannow command again.
      My ComputerSystem Spec


 

Related Threads
Solved BSOD SYSTEM_SERVICE_EXCEPTION 0x3b in BSOD Crashes and Debugging
I had a crash earlier where the screen turned black and my computer reset, but there was no BSOD so I dont have the report on that. The computer also blue screened while rebooting from the black screen crash, then later it blue screened again while...
Hi everyone, Can somebody take a look on my bugcheck analysis? I really don't know what has caused the bsod i don't know much about this. bugcheck analysis: http://textuploader.com/5bz3l
Random Crashes Windows 10 error 0x3b in BSOD Crashes and Debugging
Has anyone have any issues with a 0x3b on Windows 10. I have an Acer Aspire that crashes randomly, maybe once every 24-48 hours. I think it is the 0x3b causing the issue but I have placed my mini memory dump file online if any experts could have...
BSOD win10 0x1000007e in BSOD Crashes and Debugging
Please help. Zips are attached Dumps are below Am experiencing BSOD issues while gaming, though it has happen randomly over web browsing too. I am mixing ram, but it should be fine since I have the same timing ram capacity cas latency voltage...
BSOD playing Skyforge, error 0x12b in BSOD Crashes and Debugging
Hi, I was playing Skyforge for a couple hours. I had some programs running in the back like firefox, skype, steam etc. I was reading something through firefox and as soon as I tabbed back into Skyforge the BSOD occurred. I was running Windows...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:04.
Find Us