BSOD Enabling 2nd Core(Processor) in BIOS crashes Startup

Mechashit · 04 Dec 2016

Greetings Everyone,

My laptop suddenly shut down and sometimes showing Whea_Uncorrectable_Error(BSOD) on loading while logo shows up but when I disable the second core and set it to "always low" my laptop boots normally. I tried to reinstall the heat sink with new Thermal Paste(maybe this is low quality TP) but still no luck

Some relevant info:
System specs: Toshiba Satellite L505-S6959, Windows 10 x64 Enterprise, Intel(R) Core(TM)2 Duo CPU T6500, 4GB RAM DDR2, Insyde Bios 1.50

Blue Screen View has red highlight on hal.dll and ntoskrnl.exe

I think the cpu over heats or some software error

Please don't expect my reply immediately
Thanks for the reply in advance :)

Ztruker · 04 Dec 2016

You are running build 10240, the initial release of Windows 10. You need to get up to date including Threshold 2 10586 and the anniversary update 10493 plus updates on top of it. The current release level with all updates is 14393.447.

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the

WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe001a2660318, Address of the WHEA_ERROR_RECORD structure.

Code:

kd> !errrec ffffe001a2660318
===============================================================================
Common Platform Error Record @ ffffe001a2660318
-------------------------------------------------------------------------------
Record Id     : 01d24e6815338cc6
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 12/4/2016 19:53:51 (UTC)
Flags         : 0x00000000

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ ffffe001a2660398
Section       @ ffffe001a2660470
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : BUS error
Operation     : Generic
Flags         : 0x00
Level         : 0
CPU Version   : 0x000000000001067a
Processor ID  : 0x0000000000000000

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ ffffe001a26603e0
Section       @ ffffe001a2660530
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000000
CPU Id        : 7a 06 01 00 00 08 01 00 - 9d e3 08 0c ff fb eb af
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0  @ ffffe001a2660530

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ ffffe001a2660428
Section       @ ffffe001a26605b0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)
  Status      : 0xb200004000000800

Similar problems here:
Blue screen error windows 7 - Microsoft Community
BSOD clean system, 0x00000124 - Windows 7 Help Forums

Several others I found said a clean reinstall of Windows 10 fixed the problem.

Mechashit · 05 Dec 2016

sweet. thanks for the reply. I'll reinstall the windows and update here :)