BSOD Driver Overran Stack Buffer, comes at random times.

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #11

    Run memtest86+ and if it gets a error then stop and replace that DIMM. If not swap DIMMs and test again. Either that or continue to use as you are now and if no problems after a week, replace the one not installed.
      My Computers


  2. Posts : 18
    Windows 10 Pro
    Thread Starter
       #12

    will do, just haven't been to bed yet i plan to test when i look at doing sleep, will report back with how things go, thanks for the help so far.
      My Computer


  3. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #13

    You need a new plan :)

    1. Sleep
    2. Eat
    3. Debug

    :) :) :)
      My Computers


  4. Posts : 18
    Windows 10 Pro
    Thread Starter
       #14

    Ztruker said:
    You need a new plan :)

    1. Sleep
    2. Eat
    3. Debug

    :) :) :)
    if it was that simple i would lol, anyway i checked both sticks individually, first stick zero errors, no notes, 2nd stick, no errors, 1 note, Your RAM may be vulnerable to high frequency row hammer bit flips. However the conditions needed to induce these errors occur only very rarely in normal PC usage, and so this should not be of concern to most users.

    so, does that mean there is some other problem? or should i have run 8 passes rather than 4? here is the file from the test of the 2nd stick, i swapped back to the first stick which had no errors or notes and will see how it goes, could be my ram is ok but my motherboard is shot, i dunno, ideas?
      My Computer


  5. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #15

    Run with 4GB as you are now for a week or two. If no BSOD then add the other 4GB. See what happens.

    It's possible removing and reinserting the ram has fixed the problem by removing some corrosion from the pins. May not be visible to the naked eye.
      My Computers


  6. Posts : 18
    Windows 10 Pro
    Thread Starter
       #16

    i run 2 sticks of 8, but yeah i was going to do that anyway, see how it goes, so far no blue screen, so hopefully all is well.
      My Computer


  7. Posts : 18
    Windows 10 Pro
    Thread Starter
       #17

    so, i was running one stick, got a new motherboard so i replaced my old one to see if it was the problem, put in both sticks, only cost me 114 so, all good, but now, rather than blue screening, it just seems to reboot with no errors apart from looking in the event viewer where it says the reboot was unexpected.. what do i do now? swap back the motherboards, remove the ram again, i'm totally at a loss now.
      My Computer


  8. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #18

    I'd try one stick of RAM again.
      My Computers


  9. Posts : 18
    Windows 10 Pro
    Thread Starter
       #19

    well, i installed the motherboard without reinstalling, and when i started having the problems, i just did a reinstall, i'll let it run and see how we go, if it crashes again, then i will deff know this time the ram is the problem, and not the motherboard.
      My Computer


  10. Posts : 18
    Windows 10 Pro
    Thread Starter
       #20

    really strange errors now, swapped motherboards, and now, i have had 2 blue screens, but before the system can generate the crash dump the whole system just turns off, i got no idea why, as i can't look at any crash dumps at all, running 2 sticks of ram still, but if it was the memory, wouldn't i just be getting the normal memory management crash?
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:48.
Find Us




Windows 10 Forums