Windows 10: BSOD usually when high end gaming, but then will loop BSOD on startup

  1.    17 Nov 2016 #1

    BSOD usually when high end gaming, but then will loop BSOD on startup


    Hi,
    Im finding that i normally get a BSOD (Bad Pool Header) when playing high graphics games. The system will then restart over and over.

    I have to switch off the PC and then leave it for a while before coming back to it.

    What i have done:
    Updated all the drivers
    Ran Memory test - no errors
    Ran blue screen view and each BSOD is reported as NTOSKRNL.exe

    DM Tool uploaded any help greatly appreciated
    BSOD usually when high end gaming, but then will loop BSOD on startup Attached Files
      My ComputerSystem Spec


  2. Posts : 2,166
    64bit Win 10 Pro ver 1703 Build 15063.138
       18 Nov 2016 #2

    Hello and welcome to TenForums

    I've had a look at some of your files from the BSOD events and there are a few which refer to the MSI Latency tuner driver amifldrv64.sys
    Code:
    BugCheck 19, {22, ffff9b00f3d4c000, 0, 0}
    
    *** WARNING: Unable to verify timestamp for amifldrv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for amifldrv64.sys
    Probably caused by : amifldrv64.sys ( amifldrv64+1a04 )
    DPC Latency Tuner is an MSI program that runs on your system to try and optimize performance. You should try removing it and see if it makes a difference.
      My ComputerSystem Spec

  3.    18 Nov 2016 #3

    philc43 said: View Post
    Hello and welcome to TenForums

    I've had a look at some of your files from the BSOD events and there are a few which refer to the MSI Latency tuner driver amifldrv64.sys
    Code:
    BugCheck 19, {22, ffff9b00f3d4c000, 0, 0}
    
    *** WARNING: Unable to verify timestamp for amifldrv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for amifldrv64.sys
    Probably caused by : amifldrv64.sys ( amifldrv64+1a04 )
    DPC Latency Tuner is an MSI program that runs on your system to try and optimize performance. You should try removing it and see if it makes a difference.
    Thanks for this, funnily enough i did some research today which came up with the same file name. I have removed all MSI stuff from my PC to see if it makes a difference!
      My ComputerSystem Spec


 

Related Threads
BSOD and restart loop in BSOD Crashes and Debugging
Hi I have been getting random BSOD with all different kinds of messages (tcpsp.sis missing or contains errors, irql_not_less_or_equal, KMODE_EXCEPTION_NOT_HANDLED) The PC is custom built by myself and I have tried many things to try to find out...
Hello, LINK TO FILES https://drive.google.com/folderview?id=0B2D4Ia2f0L5iMmllT0xybnF3VEE&usp=sharing I started having a BSoD Loop occur this morning. I built this computer about one month ago. I actually was having a similar issue with...
I recently upgraded my htpc from 8.1 pro to Win 10 pro. I have had multiple BSOD since then. 4 were for store exception not handled and the last 2 were for kmode exception not handled mv91xx.sys. Please advise.
Solved BSOD Loop restart. in BSOD Crashes and Debugging
I've been experiencing startup issues with my PC since last night. I go to startup and startup freezes. It seems that something is either stuck or freezing up on loading. Since it doesn't fully boot up, I have been hitting the reset button or...
I purchased a new GFX card, my power supply wasn't good enough for it, so I took it out, and now when my computer boots it boots in to start up repair and loops, this is what the message says (I'm typing this out from my room mates computer): ...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:28.
Find Us