Windows 10: Memory management BSOD resulted in automatic repair loop
axe0, screenshot attached.
Disk 1 is the SSD from my Dell laptop. I see that the OS(G drive is stating no free space available. I will look to move any unnecessary files off this drive to external from the command prompt.
I have freed up 18% of space from the os (g: )
Last edited by 7imrc; 09 Nov 2016 at 07:23.
Good, does the problem re-occur?
Unfortunately, yes. Same problem, with same BSOD regarding CLFS.SYS and error code 0xc000007b.
Memory management BSOD resulted in automatic repair loop
Have tried this, but still does not solve the problem?
Error 0xc0000001 showed up then returned to the original clfs.sys error message.
Last edited by 7imrc; 10 Nov 2016 at 09:03.
What memory tests did you run? How long/many passes?
4. Memory tests appear ok
I ran the dell pre boot diagnostic tests and memdiag from the command prompt and watched the result on screen (limited what I could do in recovery environment).
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
MemTest86+ needs to be run for at least 8 complete passes
for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero
errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Have an existing W-10 Home on a Dell 660 Desktop.
It keeps starting with the Automatic Repair that goes to the "Diagnosing your PC" to the "Pc did not start correctly".
Going to "Advanced" and "Troubleshooting" I first tried to "Reset". Went thru...
I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where...
I upgraded from windows 7 to 10 when it was released and have had no problems with it until now. However when I started up my pc this morning it showed the windows logo and below that said "preparing automatic repair repair" the text then changed to...
So I thought I'd try out free version of Avast. Well, after few weeks of getting rocked by popups, I uninstalled it(from programs and features) and rebooted it, thinking life is good now. Hell naw it ain't good now, not at all.
I'm stuck in...
I installed the Windows 10 Technical Preview yesterday, and at the end of the day, it froze up. I shut down the system and turned it back on this morning, finding the OS stuck in the infamous "Automatic Repair Loop." I ended up having to install a...