BSOD on new build - Kernel Security Check, Whea Uncorrectable Error

Page 3 of 3 FirstFirst 123

  1. Posts : 14,903
    Windows 10 Pro
       #21

    That is unfortunate news. We've tried so many things and have at most learned that each of them could not detect the true cause of the error. Are we running out of options?
    We're not running out of options, driver verifier has quite some options that could be enabled.
    If, however, there were no options left in driver verifier, a BIOS update wasn't available, the BIOS was resetted to the optimal settings for the current hardware, all known causes for hardware crashes weren't present on the system, no overclocking was present, no cooling issue was present causing overheating, the voltage values were proper, all cables were proper connected and there was no physically visible damage to the hardware then we would be almost running out of options.

    Good news, driver verifier has caused all crashes I've checked, bad news is that no driver is flagged.
    This means that the issue isn't drivers, in most cases the issue is a hardware level issue (faulty hardware or voltage issues).
    Could you post the following information from the BIOS
    1. CPU voltage
    2. RAM frequency, voltage and timing
    3. 3.3v, 5v and 12v values


    Please check your cabling to ensure it is properly connected.
      My Computers


  2. Posts : 14
    Windows 10
    Thread Starter
       #22

    Cool, that's encouraging.

    CPU vcore 1.068
    Ram freq 3000MHz, voltage 1.35V, timing

    values
    3.3v 3.344V
    5v 5.010V
    12v 12.096V

    will edit this post to confirm cables are properly connected and Ram timing.
      My Computer


  3. Posts : 14,903
    Windows 10 Pro
       #23

    Please don't edit the post, but post a new reply for it. Else I won't be notified about new information what would result in a few days response delay or longer depending on if I remember that there are changes in this thread and how soon you notify us about not having received help after some time.
      My Computers


  4. Posts : 14
    Windows 10
    Thread Starter
       #24

    No problem.

    CPU vcore 1.068

    Ram freq 3000MHz, voltage 1.35V, timing 15-16-16
    in BIOS it looks like this
    CAS LATENCY 15 Auto
    tRCD 16 Auto
    tRP 16 Auto
    tRAS 35 Auto

    values
    3.3v 3.344V
    5v 5.010V
    12v 12.096V

    I have disconnected and reconnected all cables, and I confirm hardware is properly connected in their appropriate slots.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:09.
Find Us




Windows 10 Forums