BSOD Randomly

Hi JoshBoiBro,

Welcome to the 10forums :)

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Please temporary uninstall Avast and use Windows Defender as alternative.
Driver Reference Table - aswStm.sys
Uninstall Solved Anti Virus (AV) stand alone removal tools - Windows 10 Forums

Code:

ffffd001`70f37c78  fffff800`9aba8c47Unable to load image aswStm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswStm.sys
*** ERROR: Module load completed but symbols could not be loaded for aswStm.sys
 aswStm+0x8c47

Please uninstall Oracle VirtualBox, or try to reinstall/update it.

Code:

ffffd001`70f39508  fffff800`9bbf3a46Unable to load image VBoxNetLwf.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for VBoxNetLwf.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetLwf.sys
 VBoxNetLwf+0x3a46

Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.

In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

It would be best to make sure what the problem is before you replace anything :)

In case you forgot, or missed it, see part 3