Page 1 of 2 12 LastLast

  1. Joined : Sep 2016
    Posts : 7
    Windows 10
       13 Sep 2016 #1

    Multiple IRQ_NOT_LESS_OR_EQUAL bsod with memory corruption bsod's


    Hello.

    I got multiple bsod's in any day when using my laptop. Some of them blaming hardware fault, others just that memory is corrupted. Here is link to answers.microsoft.com thread and there is seen what i have done so far. After last post there i have alredy got new bsod's as you can see in collected info. And after my last message there yesterday i removed all symantec software, installed back eset nod 32 antivirus and Macrium reflect backup. I hope that someone can point me what is failing, is it driver or hardware issue, because my laptop quarantee will end in middle of next month.
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       16 Sep 2016 #2

    Hi erki,

    Welcome to the 10forums

    I didn't have time to read the Microsoft, I will tomorrow

    I assume that you still need help so I would ask to upload a new zip providing us new information necessary for analysis.
      My System SpecsSystem Spec


  3. Joined : Sep 2016
    Posts : 7
    Windows 10
       17 Sep 2016 #3

    Hello.
    Yes, i need You help. I'v reinstalled vmware ,oracle virtualbox and checkpoint mobile. I'm also running verifier with default settings and with all loaded none microsoft drivers selected. Issue seemd to improved after uninstalling all symantec software ( bsod's are not so frequent any more).
      My System SpecsSystem Spec


  4. Joined : Sep 2016
    Posts : 7
    Windows 10
       17 Sep 2016 #4

    And please note, that some of latest bsod's is maybe my fault, when selecting wrong settings in verifier and set things "too tight" for eset and got bsod while laptop coming up from restart.
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       17 Sep 2016 #5

    No problem
    I would however recommend to remove any 3rd party AV and use Windows Defender while troubleshooting, to ensure they won't cause any conflict as some often do.

    Please remove all USB devices while troubleshooting.

    Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
    Please remove Daemon Tools and run the SPTD pass through remover.

    1. Uninstall Daemon Tools
    2. Download the SPTD standalone installer and follow these steps:
      • Double click the executable to open it
      • Click on the button shown below




    If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


    I hope that someone can point me what is failing, is it driver or hardware issue, because my laptop quarantee will end in middle of next month.
    No problem, there is an 'easy' method for quickly finding out if a problem is a hardware issue or a driver issue.
    I would suggest to read my post carefully and below quote for recovery instructions.
    My post is about using driver verifier in an advanced way, using all options in driver verifier on all available drivers but in phases to prevent certain issues like boot problems.


    Multiple IRQ_NOT_LESS_OR_EQUAL bsod with memory corruption bsod's Diagnostic Test Multiple IRQ_NOT_LESS_OR_EQUAL bsod with memory corruption bsod's
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.
      My System SpecsSystem Spec


  6. Joined : Sep 2016
    Posts : 7
    Windows 10
       17 Sep 2016 #6

    Hello.
    Removed Eset NOD 32 and seems that Defender taked over
    Uninstalled Daemon Tools Pro, and SPTD install says that there are nothing installed ( uninstall is grayed out).
    I readed you post and runned verifier with setting you described in you post. Just after restarting ( not while loading winddows) for verifier to start running, got new bsod INTERRUPT_EXCEPTION_NOT_HANDLED.
    Can't remove all usb devices, because this is laptop and some of built in hardware is connected to usb. Removed logitech unified receiver after i got bsod (i didn't remembered it stayed connected... ).
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       18 Sep 2016 #7




    Multiple IRQ_NOT_LESS_OR_EQUAL bsod with memory corruption bsod's Diagnostics Test Multiple IRQ_NOT_LESS_OR_EQUAL bsod with memory corruption bsod's
     Clean boot

    Please try the following:
    • Open taskmanager
      • Go to the tab startup
      • disable everything

    • Search msconfig and open it
      • Go to the tab services
      • Check 'hide microsoft services'
      • Uncheck all other services
      • Click apply and click ok

    • Reboot if asked

    See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.
      My System SpecsSystem Spec


  8. Joined : Sep 2016
    Posts : 7
    Windows 10
       18 Sep 2016 #8

    Hi, did both. Nothing happened, when averything was disabled. Enabled all vmware services and got bsod IRQL_NOT_LESS_OR_EQUAL after restart. next disabled vmware usb and got new bsod REFERENCE_BY_POINTER after restart. this one is saying that process failing was sqlsrv.exe ?
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    Posts : 10,897
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       18 Sep 2016 #9

    Uninstall VMware temporary.

    Sqlsrv.exe is a part of the program 'Microsoft SQL Server', see here for more information about this file
      My System SpecsSystem Spec


  10. Joined : Sep 2016
    Posts : 7
    Windows 10
       19 Sep 2016 #10

    Enabled in hour basis services in msconfig ( enabled logical group like all nvidia services etc, let it run an hour) and no bsod happened on sunday. but after let laptop to run overnight got new bsod after midnight ( I was not using laptop for hours). This time it is SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION.
    Now i will reinstall vmware, because i need it for work.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Solved BSOD, Critical Structure Corruption
Hi there, I followed the "Windows 10 Upgrade Assistant" to upgrade a PC from Windows 7 (home edition) to Windows 10 approximately a week ago. Unfortunately, since the change, the PC became rather unstable, seeing daily BSOD, sometimes every 10...
BSOD Crashes and Debugging
Critical System Corruption BSOD
95699 This has been occurring almost everyday now for the past week. I have no clue what to attach or send in this post, but I am more than willing to cooperate to the fullest extent to alleviate this issue. I've rand Memory Diagnostics in...
BSOD Crashes and Debugging
Multiple BSOD's - Primarily Critical Structure Corruption
Yesterday while trying to watch a blu-ray on my PC, I encountered two BSOD's due to "Critical Structure Corruption". It then happened again today during a 4 hour session of playing The Division. Since then, I've also encountered two different...
BSOD Crashes and Debugging
Multiple BSOD. Most recent - Memory Management: ntkrnlmp.exe
Hi all, I'm not very experienced with computers at all. I just built a computer from scratch with a friend. Just did a clean install of Windows 10 and have been having random BSODs since then. Memtest was ran for 8 passes with no error. Just...
BSOD Crashes and Debugging
Solved BSOD - irq_not_less_or_equal - chdrvr01.sys after update reboot
Hello Gang, I thought I'd post here to see if we can see what's up. Files attached. This is my main system, after the last two update cycles, when rebooting I'll get the title BSOD and it will loop. I have a CH Products Fighterstick,...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:33.
Find Us
Twitter Facebook Google+



Windows 10 Forums