1.    12 Sep 2016 #1
    Join Date : Sep 2016
    Posts : 5
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free

    BSOD PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 ntoskrnl.exe


    System Spec

    Computer type:PC/DesktopOS:windows 10 pro 64x CPU:intel 4790kMotherboard:msi z97 gaming 7Memory:2x G.SKILL Ripjaws X Series 8GBGraphics Card(s):evga gtx 970 SC
    Samsung Evo 850 500gb ssd

    Hello Everyone.

    I keep getting this error. This usually happens when the computer is idling for an extended period of time. These are some things I've done to trouble shoot the issue.

    1. I've ran sfc and it was clean

    2. 99% of the time this happens when my computer is idling.

    3. I ran driver verifier and it crashed immediately after rebooting. and ive included the results in the logs

    4. checked the logs manually with bluescreen viewer, and I see that ntoskrnl.exe is the main culprit

    5. Ran memtest86 overnight and no errors.

    6. Removed SCP controller drivers.

    update: just got a bsod today "IRQL_NOT_LESS_OR_EQUAL" ntoskrnl.exe same file as before.



    Here are the logs.
    Last edited by cloud3648; 13 Sep 2016 at 20:29.
      My ComputerSystem Spec
  2.    14 Sep 2016 #2
    Join Date : Jun 2015
    Posts : 12,658
    Windows 10 Pro

    If you are using a program like Ccleaner please stop using it while troubleshooting.
    This because programs like Ccleaner remove dump files that are needed to troubleshoot.
    Or configure Ccleaner to not remove dump files:



    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

      My ComputersSystem Spec
  3.    14 Sep 2016 #3
    Join Date : Sep 2016
    Posts : 5
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter

    Hey I did what you asked. I updated my system info.
      My ComputerSystem Spec
  4.    15 Sep 2016 #4
    Join Date : Jun 2015
    Posts : 12,658
    Windows 10 Pro

    Please complete your system specs.
    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

      My ComputersSystem Spec
  5.    15 Sep 2016 #5
    Join Date : Sep 2016
    Posts : 5
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter

    its done, don't know why it didn't take before. I got another bsod today I had utorrent active.
    DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1

    here is the new log
    Last edited by cloud3648; 15 Sep 2016 at 19:34.
      My ComputerSystem Spec
  6.    16 Sep 2016 #6
    Join Date : Jun 2015
    Posts : 12,658
    Windows 10 Pro




    BSOD PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 When computer is idling. Diagnostic Test BSOD PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 When computer is idling.
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec
  7.    16 Sep 2016 #7
    Join Date : Sep 2016
    Posts : 5
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter

    I mentioned when I first made the thread the things I did to troubleshoot the issue. One of them was running memtest overnight with no errors.
      My ComputerSystem Spec
  8.    16 Sep 2016 #8
    Join Date : Jun 2015
    Posts : 12,658
    Windows 10 Pro

    I'm sorry to argue about it, but the requested test is MemTest86+.

    IF you ran MemTest86+ already, an overnight test is not enough for the amount of memory mentioned in your system specs.
    Most users have 8GB of memory: running MemTest86+ until 8 passes with 8GB takes 8-10h (overnight).
    Those who have 16GB of memory: running MemTest86+ until 8 passes takes about 1 day to 2 days.
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
BSOD 0x00000050 0x0000003b 0x0000000A
My computer has crashed for some time now and the things I have been doing so far is Swap out my GTX 660 for my old GTX 460. No improvements. Swap out my ram memory with a friend 8GB.No improvements. Installed a clean version of Windows 10. It...
BSOD Crashes and Debugging
PAGE_FAULT_IN_NONPAGED_AREA 0x00000050
I'm getting BSOD above, only when using driver verifier (i do verifier at the times to check drivers) Bluescreenview says it's caused by ntoskrnl.exe. Thanks!
BSOD Crashes and Debugging
Received BSOD 0x00000050
I received this BSOD out of the blue. The general BSOD analyzers are not specific to the cause. This is a two month old Dell laptop. I am trying to get a Dell Thunderbolt Dock working on it. This dock required several driver updates and a firmware...
BSOD Crashes and Debugging
BSOD playing The Witcher 3 or TerraTech error code 0x00000050
Hello, i have resently built a new gaming/development machine for my self and have been Page fault in non-paged area on Blue screening. attached is the minidumps along with all the other required information. i look forward to your...
BSOD Crashes and Debugging
BSOD browsing the internet, error 0x00000050
I have just recently installed windows 10 and 1 day later I get BSOD bug check code error 0x00000050. Ive noticed that after the windows 10 download my motherboard tempature as been 56 C and in range of 60 C and 70 C when playing games like league...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:24.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums