BSOD PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 When computer is idling.

System Spec

Computer type:PC/DesktopOS:windows 10 pro 64x CPU:intel 4790kMotherboard:msi z97 gaming 7Memory:2x G.SKILL Ripjaws X Series 8GBGraphics Card(s):evga gtx 970 SC
Samsung Evo 850 500gb ssd

Hello Everyone.

I keep getting this error. This usually happens when the computer is idling for an extended period of time. These are some things I've done to trouble shoot the issue.

1. I've ran sfc and it was clean

2. 99% of the time this happens when my computer is idling.

3. I ran driver verifier and it crashed immediately after rebooting. and ive included the results in the logs

4. checked the logs manually with bluescreen viewer, and I see that ntoskrnl.exe is the main culprit

5. Ran memtest86 overnight and no errors.

6. Removed SCP controller drivers.

update: just got a bsod today "IRQL_NOT_LESS_OR_EQUAL" ntoskrnl.exe same file as before.



Here are the logs.

If you are using a program like Ccleaner please stop using it while troubleshooting.
This because programs like Ccleaner remove dump files that are needed to troubleshoot.
Or configure Ccleaner to not remove dump files:



Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.

In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

Please complete your system specs.

Please fill in your system specs

Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.

In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

its done, don't know why it didn't take before. I got another bsod today I had utorrent active.
DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1

here is the new log

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

I'm sorry to argue about it, but the requested test is MemTest86+.

IF you ran MemTest86+ already, an overnight test is not enough for the amount of memory mentioned in your system specs.
Most users have 8GB of memory: running MemTest86+ until 8 passes with 8GB takes 8-10h (overnight).
Those who have 16GB of memory: running MemTest86+ until 8 passes takes about 1 day to 2 days.