Hi! So I have got 2 BSOD while playing. First one said whea uncorrectable error and other one said clock_watchdog_timeout. During that last BSOD it did not create a dumpfile because it stayed at 50% and I had to restart. I have attached logs to this post.
Got another BSOD, error code was whea uncorrectable error. Made a new log zip. I also ran memtest for 9 passes, no errors.
Ran prime95 for 6 and half hours, nothing happened. Any one knows what to do next?
Hi qwas789,
Please try to upgrade your Windows 10 installation to a newer version.
Windows 10 - Upgrade Installation - Windows 10 Forums
Hi, I clicked Check for updates under windows update. It installed only some windows defender update.
Please follow the tutorial.
You're using Windows 10240 while Windows 14393 has been released for about a month now.
Alright, I have upgraded to the latest windows. What now?
Alright, it happened again. I was playing World of Warcraft on my main monitor, had twitch open on second monitor. When it happened everything froze and i started hearing this like static humming or noise from my headset until computer collected information on BSOD and restarted. It was whea uncorrectable error again. I have uploaded new log file.
Warning
If you're overclocking your system, revert back to stock clocks now.
Note
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it please.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Run the long test.
Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.
with parameter /r
Disk Check - Windows 7 Help Forums
Upload the chkdsk logChkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums
- scan for errors, no quick scan but full scan
- check the health,
- benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
- the error scan,
- the health,
- the benchmark incl. following
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run Furmark for around 30 minutes.
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.
In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor
- the frequency of the GPU,
- the GPU memory clock,
- the temperature,
- the power,
- the load on the GPU,
- Etc.
I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.
Quote