1. Joined : Sep 2016
    Posts : 7
    windows 10
       04 Sep 2016 #1

    3 Times MEMORY_MANAGEMENT


    This PC has been running stable for almost 3 years now. Recently there was the windows anniversary update, a crimson driver update for radeon cards, and installation of a new mouse. The three memory_management bsods happened when alt_tabbing, when closing a game and when trying to shutdown the computer. These 2 RAM memory modules that I have were tested to exhaustion when I first got them. I thought my pc was well and good, and now I don't know what's happening. Would really appreciate any help.Attachment 99780
      My System SpecsSystem Spec


  2. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,334
    Windows 10 Pro X64 14393.576
       04 Sep 2016 #2

    Code:
    BugCheck 1A, {3f, 860, 767b8657, 8fa19e8c}
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    Probably caused by : memory_corruption
    Followup:     memory_corruption
    ---------
     *** Memory manager detected 1 instance(s) of corrupted pagefilepage(s) while performing in-page operations.
    Code:
    ADDITIONAL_DEBUG_TEXT:  Memory Manager detected corruption of a pagefile page while performing an in-page operation.
    The data read from storage does not match the original data written.
    This indicates the data was corrupted by the storage stack, or device hardware.
    Time to test RAM again.
    ===================================================
    RAM:

    Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

    information   Information

    MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses


    Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    warning   Warning
    MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.


    If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note   Note
    MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.


    Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.
      My System SpecsSystem Spec


  3. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,334
    Windows 10 Pro X64 14393.576
       04 Sep 2016 #3

    Also just noticed this:
    Code:
    ffffb401`f8a12c78  fffff80a`9e9022ceUnable to load image \SystemRoot\System32\DRIVERS\fvevol.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for fvevol.sys
    *** ERROR: Module load completed but symbols could not be loaded for fvevol.sys
     fvevol+0x122ce
    This belongs to something called Driver de Filtro de Cr according to drivers.txt file. I don't know what that is but if you do, see if htere is an updated driver or if not necessary, uninstall it.
      My System SpecsSystem Spec


  4. Joined : Sep 2016
    Posts : 7
    windows 10
       04 Sep 2016 #4

    edit 1


    Thank you for replying Ztrucker, I appreciate it. I guess we'll have to test the ram then. I don't have a usb drive right now, so I'll run the 8 passes tomorrow night. Could it be that the storage device was in fault as well? I am running the pagefile on a samsung ssd, and had the rapid mode for it turned on (it's off now).
    As for the Driver for Filtro de Cr (Cr filter?), I don't know, could it be malware? Some sort of browser filter perhaps?
    Last edited by Otavio Sakay; 04 Sep 2016 at 22:48. Reason: To complete, I replied by accident
      My System SpecsSystem Spec


  5. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,334
    Windows 10 Pro X64 14393.576
       06 Sep 2016 #5

    I think the Cr is truncated and is actually a longer word.

    I did find this:
    Code:
    What is fvevol.sys?
    Microsoft BitLocker drive encryption driver system driver file.
    Read the info at the linked page.
      My System SpecsSystem Spec


  6. Joined : Sep 2016
    Posts : 7
    windows 10
       07 Sep 2016 #6

    Thanks for replying again Ztrucker. It looks like a safe windows function, right? I'm worried about the ram, will try to get the results as soon as possible. If they come out ok, does it mean my ssd is bonkers?
      My System SpecsSystem Spec


  7. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,334
    Windows 10 Pro X64 14393.576
       08 Sep 2016 #7

    Don';t know yet. Will have to do more testing to figure out if not memory.
      My System SpecsSystem Spec


  8. Joined : Sep 2016
    Posts : 7
    windows 10
       22 Sep 2016 #8

    Ok, my videocard died. It froze my pc during gameplay and the PC will not POST with it installed. (red light indicating VGA missing on the motherboard). Using my secondary card only things have been running smooth. Could those problems have been caused by the dying video card?
      My System SpecsSystem Spec


  9. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,334
    Windows 10 Pro X64 14393.576
       24 Sep 2016 #9

    Absolutely. Run for awhile and see how it goes.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Solved Memory_management bsod
Hello, I've recently started getting MEMORY_MANAGEMENT BSODs. It feels like it happens anytime my PC starts using more RAM (>6gb) which with everything running happens pretty much after starting all programs I normally use. It might...
BSOD Crashes and Debugging
Memory_management Error
sometimes I get that blue screen for Memory_management Error 77147 tried to make sfc/scannow at cmd several times and get that msg : "Windows Resource Protection found corrupt files but was unable to fix someof them. Details are included in...
BSOD Crashes and Debugging
Solved Memory_management bsod
First BSOD after a while of running fine. This is a new build PC with a clean install of Windows 10. It crashed a lot after installation, then settled down. Today, I'm running a download installer for 9.5GBytes of graphics applications and data....
BSOD Crashes and Debugging
Get IRQL_NOT_LESS_OR_EQUAL and MEMORY_MANAGEMENT + others
This happens when browsing, playing WOT, or sometimes I come down and computer has rebooted from it when I'm not even on it. PLEASE HELP. Upgraded Windows 10 Pro on top of a newly purchased albeit refurbished PC with Win 7. Addendum, I also ran...
BSOD Crashes and Debugging
Solved same BSOD multiple times (MEMORY_MANAGEMENT)
Hi since i upgraded to windows 10 i have been getting this BSOD, i didnt get it before in windows 7. let me first say that my PSU is dieing, i will replace it when i get enough money saved up, i dont think that a MEMORY_MANAGEMENT bsod could be the...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:19.
Find Us
Twitter Facebook Google+



Windows 10 Forums