Windows 10: bsod problem

  1. Posts : 32
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
       17 May 2015 #1

    bsod problem

    I made a thread before this under hardware but its not hardware.

    My computer freezes and I get this blue screen error. I DO NOT SEE A BLUE SCREEN. THIS IS FROM A MINIDUMP.

    I have provived a zip with the Minidump in it.

    Attachment 19226
      My ComputerSystem Spec

  2. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       18 May 2015 #2

    Hi sammyandsam.

    You described a PAGE_NOT_ZERO BSOD, which is stop 0x127. It is .....
    PAGE_NOT_ZERO (127)
     This bugcheck  indicates that a page that should have been filled with zero was  not.  Typically this is due to a hardware error or some  privileged  component modified a page after freeing it.
    Whereas, the attached minidump says something different, a KERNEL_SECURITY_CHECK_FAILURE (0x139); which is ....
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    So there is a versatility of the bugcheck codes.

    I would suggest you to do the following:

    Scan the system for possible virus infection with the following programs.

    Test your RAM modules for possible errors.Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

    Stress test the Graphics Card using Furmark.Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

    Stress test the CPU.It saves the result as a .txt file in the prime95's folder. Upload the file for us.

    Report us the results. If you report for any further BSOD, do it following the Blue Screen of Death (BSOD) Posting Instructions .
      My ComputerSystem Spec

  3. Posts : 32
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter
       18 May 2015 #3

    I have no idea why I thought it was page_not_zero.

    I ran the TDSSKiller scan and found nothing.
    I did the Windows Defender and found nothing.
    I couldn't run a Memtest. I need to find some time to do it.

    I did stress the graphics card. here is and image: here
    I ran the cpu stress test. Here is the text file.
    [Mon May 18 17:15:09 2015]
    Self-test 12K passed!
    Self-test 12K passed!
    [Mon May 18 17:21:03 2015]
    Self-test 8K passed!
    Self-test 8K passed!
    Hopefully this is everything you need.
    I also did not get any bsod when running these.

    I used BlueScreenView to see the dump file.
      My ComputerSystem Spec

  4. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       19 May 2015 #4

    sammyandsam said: View Post
    I have no idea why I thought it was page_not_zero.
      My ComputerSystem Spec

  5. Posts : 32
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter
       19 May 2015 #5

    Arc said: View Post
    Ok, now I know why.

    On a BSOD analyzer, it had this:
    I thought it was that...

    Still, any more help?
      My ComputerSystem Spec

  6. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       19 May 2015 #6

    If all the tests suggested in post #2 yielded no issue, then apparently you are safe right now. Report us for any further BSOD.
      My ComputerSystem Spec


Related Threads
Solved My first BSOD in ten. in BSOD Crashes and Debugging
It happened after I just have installed Speccy and let it run for the first time. When it is "Analyzing", the BSOD happened. The screen says it is cpuz138_x64.sys that caused the BSOD. I dont have CPUz Installed. The later runs of Speccy...
Solved BSOD: Can Some Please Take A Look in BSOD Crashes and Debugging
My computer blue screened upon updating, can someone have a look and see what needs to be done, please?
My First Win 10 BSOD in BSOD Crashes and Debugging
Throwing it out here for everyone. A lot of symbols can't be found. Seems to blame my graphics driver and the stack indicates the driver got caught up in some type of loop. A few minutes before that, Facebook was open and a video played,...
BSOD problem in BSOD Crashes and Debugging
I'm not sure if my issue is the same, but i have been crashing alot since the new build, sometimes i get BSOD, sometimes my video locks up then everything freezes causing me to hard reboot.
Bsod help please in BSOD Crashes and Debugging
Hey all getting bsod on windows 10 tech preview here is my debug info 12754 help much appreciated. I have run mem test overnight no ram errors. cheers Just a bit more info the error bcc is 0xc000021a and the cause is "ntoskrnl.exe" address...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:29.
Find Us