New
#31
Your shop couldn't find the problem, else you wouldn't be here.
I have no judgement, but we cannot rule out hardware.You think its hardware related?
Your shop couldn't find the problem, else you wouldn't be here.
I have no judgement, but we cannot rule out hardware.You think its hardware related?
Verifier didnt cause any BDSO ..
Now its either hardware test or parts swap.
What do u suggest?
Starting with a logical one for a 0x1A(MEMORY_MANAGEMENT)
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Please note, a software test is never 100% conclusive. For 100% conclusive results swapping is required.
With memory you could try it this way
- Remove all sticks accept for one and note where it is
- Does a freeze occur? Move the stick to another slot and note the used slots and the result of the previous slot
- Does a freeze occur? Move the stick to another slot and note the used slots and the result of the previous slot
- etc.
Switch sticks and do the same.
Thnx pal i m on it !! I ll keep you updated as soon as i find an error (or finish every stick/slot testing)
Just a side note ! i dont know if that pinpoints somewhere but now it micro freezes for a 1-2 seconds max during character select in various fighting games (mortal kombat x + King of fighter xiii)