Critical System Corruption BSOD


  1. Posts : 29
    Windows 10
       #1

    Critical System Corruption BSOD


    Attachment 95699


    This has been occurring almost everyday now for the past week. I have no clue what to attach or send in this post, but I am more than willing to cooperate to the fullest extent to alleviate this issue.

    I've rand Memory Diagnostics in Windows 10 and it turned out no results so my memory I guess is A-okay. Ran Malwarebytes so no viruses.

    Specs:
    Windows 10 64 bit home
    Asus H97I-PLUS Mini ITX
    Intel Core i5-4690k 3.5ghz quad-core
    Crucial Ballistix Sport 16gb 2 x 8
    WD Caviar Black 1tb 3.5" 7200 rpm
    gigabyte geforce gtx 660 2gb
    Corsair SF 450w psu
    silverstone rvz02 case
    Last edited by invictus; 12 Aug 2016 at 10:49.
      My Computer


  2. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #2

    Follow the instrictions in the link at the top of this forum and at the top of your post: Blue Screen of Death (BSOD) Posting Instructions
      My Computers


  3. Posts : 29
    Windows 10
    Thread Starter
       #3

    I attached the necessary zip file from the software you provided me a link to :)
      My Computer


  4. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #4

    Latest dump indicates a problem with your NVIDIA GeForce GTX 660 driver or card.
    Code:
    BugCheck 119, {1, 3fac, 3fae, ffffe001b9e933a0}
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    Probably caused by : dxgmms2.sys ( dxgmms2!VidSchiVerifyDriverReportedFenceId+c176
    dxgmms2.sys is a Windows module, not likely the actual cause of the problem.
    I suggest completely uninstalling the Nvidia display drivers using Display Driver Uninstaller (DDU) from WagnardMobile (near bottom of page) then look here for the latest driver:

    NVIDIA Driver Downloads

    Then reinstall only the NVidia graphics driver and the PhysX driver.

    See if that gets rid of the problem.
      My Computers


  5. Posts : 29
    Windows 10
    Thread Starter
       #5

    Well I tried this and the issue still persists. I also reapplied thermal paste to my gpu. It still crashes upon waking from sleep mode.
      My Computer


  6. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #6

    Did you get another dump? If so, re-run DM_Log_collector and upload the zip file here.

    Dump shows your CPU is slightly under clocked.
    Code:
    0: kd> !sysinfo cpuspeed
    CPUID:        "Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz"
    MaxSpeed:     3500
    CurrentSpeed: 3492
    Check clocking and voltages.

    Please disconnect everything from your PC other than mouse, keyboard and display (and speakers if external).

    If you have a SSD then check to see if there is a firmware update available for it.

    This is a good time to test you PC memory too.
    ===================================================
    RAM:

    Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

    information   Information

    MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses


    Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    warning   Warning
    MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.


    If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note   Note
    MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.


    Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.
      My Computers


  7. Posts : 29
    Windows 10
    Thread Starter
       #7

    I've ran memory diagnostics in windows 10 and no errors were found.

    I don't own an ssd just a Western Digital 1tb caviar black.

    I'll try to fiddle around in the bios and see what I can do to adjust the cpu and voltages.

    Here's the new log: Attachment 96313
      My Computer


  8. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #8

    Did you run memtest86+ for 8 complete passes? With 16GB of RAM this should take hours.

    New dump still indicates a problem with the Nvidia card
    Code:
    BugCheck 119, {1, 2f9, 2ff, ffffe00153f4f3a0}
    
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
      My Computers


  9. Posts : 29
    Windows 10
    Thread Starter
       #9

    That's so strange considering I installed the newest drivers with just the driver and PhysX as you stated and clean uninstalled the previous ones with DDU on safemode. Even reapplied thermal paste. I'll run Memtest tonight.
      My Computer


  10. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #10

    The latest dump, 8:14 at 11:39PM still indicates a problem with Nvidia card.

    Looking through the Event Viewer log (eventvwr.log) there are tons of this error:
    Code:
      Log Name: System
      Source: Service Control Manager
      Date: 2016-08-15T11:49:20.569
      Event ID: 7023
      Task: N/A
      Level: Error
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Jim-PC
      Description: 
    The User Data Access_50171 service terminated with the following error: 
    Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
    I don't see any fixes but a possible work around is shown in this thread: Anyone know how to fix Event ID 7031? - Windows 10 Forums

    Might be a good idea to run the following commands from a Elevated Command Prompt:

    Dism /Online /Cleanup-Image /StartComponentCleanup
    Dism /Online /Cleanup-Image /RestoreHealth
    SFC /scannow
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:38.
Find Us




Windows 10 Forums