BSOD. (kernel security check failure, irql_not_less_or_equal) etc

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 14,901
    Windows 10 Pro
       #11

    Could you please try installing the drivers as I posted, thus without (literally) any software installed at the end of installing :)
      My Computers


  2. Posts : 15
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter
       #12

    gonna try that now.
      My Computer


  3. Posts : 15
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter
       #13

    I removed all the drivers, and shortly after while browsing with no driver, I got a Kernel_security_check_failure. I installed the driver ( with no other software) the only problem with this is that I can't set my display resolution to 1080 for some reason, that's why i had the catalyst manager for, it was the only way to get it to 1080. This is strange lol.
      My Computer


  4. Posts : 14,901
    Windows 10 Pro
       #14

    Please install only the display drivers as requested.
      My Computers


  5. Posts : 15
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter
       #15

    Ok. I installed only the display driver.
      My Computer


  6. Posts : 15
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter
       #16

    I got the bsod again . I'm not sure what the error was this time because I'm at work and my wife was using it. She was just watching YouTube videos.
      My Computer


  7. Posts : 14,901
    Windows 10 Pro
       #17

    When posting about another BSOD, please include a new zip so it can be analyzed :)
      My Computers


  8. Posts : 15
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter
       #18

    Got you, here is the new dump.
      My Computer


  9. Posts : 14,901
    Windows 10 Pro
       #19

    Where do you get your drivers? 1 of the dumps was caused by the Realtek LAN drivers, but this one is newer than the one Gigabyte provides for your motherboard.
    Code:
    ffffd001`d2cba5a8  fffff801`662ca1e1Unable to load image \SystemRoot\System32\drivers\rt640x64.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for rt640x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for rt640x64.sys
     rt640x64+0x6a1e1
    
    2: kd> lmvm rt640x64
    Browse full module list
    start             end                 module name
    fffff800`6bc20000 fffff800`6bd06000   rt640x64   (deferred)             
        Image path: \SystemRoot\System32\drivers\rt640x64.sys
        Image name: rt640x64.sys
        Browse all global symbols  functions  data
        Timestamp:        Fri Apr 22 08:46:44 2016 (5719C8D4)
        CheckSum:         000E5D29
        ImageSize:        000E6000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

    Please try following suggestions & make sure to read it carefully :)




    Diagnostics Test

     System File Check


    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc /scannow" (without quotes) and press enter
    • When it is finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at %systemroot%\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

    Make a photo of SFC and post it.




    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My Computers


  10. Posts : 15
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter
       #20

    I got the driver from the AMD site, i extracted it and installed it from the package folder. I did the SFC twice, but no violations were found on the second one. I'm going to do the memtest now.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:22.
Find Us




Windows 10 Forums