1. Joined : Jul 2016
    Posts : 5
    Windows 10 Pro 64 bit
       23 Jul 2016 #1

    BSOD problem FAULTY HARDWARE CORRUPTED PAGE


    I am having bsod problems and the problem of the bsod is FAULTY HARDWARE CORRUPTED PAGE. I did a restore factory settings from the windows 10 options like 1 month ago. After I got the bsod , I ran a malwarebytes full scan and no threats detected. So far I gotten 4 bsods.
    Ram 6GB Graphics Card Nvidia GTX 960 Processor AMD FX 6100 SIX CORE 1TB HDD and 500GB HDD Windows 10 Pro 64 BIT
      My System SpecsSystem Spec


  2. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,352
    Windows 10 Pro X64 14393.576
       23 Jul 2016 #2

    There is only one dump in the zip file you uploaded. Are you using a program that cleans your hard drive, like CCLeaner? If so, please stop until this is resolved as it's deleting .dmp files.

    Similar problem here, turned out to be memory. Windows 10 BSOD | Windows Forum

    RAM:

    Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

    Information


    MemTest86+
    is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses


    Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    Warning
    MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.

    If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note
    MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.

    Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.
      My System SpecsSystem Spec


  3. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,352
    Windows 10 Pro X64 14393.576
       23 Jul 2016 #3

    Also noticed there is a 2.8 BIOS update available on the MSI web site: Support For 970A-G45 | MSI USA | Motherboard - The world leader in motherboard design

    Your memory is not installed correctly to support Dual Channel mode. According to the manual:

    Attachment 91742

    Remove one of the 2GB modules for now until you can populate all 4 slots with identical 2GB modules.
      My System SpecsSystem Spec


  4. Joined : Jul 2016
    Posts : 5
    Windows 10 Pro 64 bit
       23 Jul 2016 #4

    So one of my memory is not installed correctly?
      My System SpecsSystem Spec


  5. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,352
    Windows 10 Pro X64 14393.576
       23 Jul 2016 #5

    It's not installed according to specs for Dual Channel to work properly. In single channel mode it may be okay.

    Run Memtest86+ overnight tonight and see if it finds any problems.
      My System SpecsSystem Spec


  6. Joined : Jul 2016
    Posts : 5
    Windows 10 Pro 64 bit
       24 Jul 2016 #6

    Ztruker said: View Post
    It's not installed according to specs for Dual Channel to work properly. In single channel mode it may be okay.

    Run Memtest86+ overnight tonight and see if it finds any problems.
    Ok I ran memtest and it found 4 errors
      My System SpecsSystem Spec


  7. Joined : Jul 2016
    Posts : 5
    Windows 10 Pro 64 bit
       24 Jul 2016 #7

    Ztruker said: View Post
    It's not installed according to specs for Dual Channel to work properly. In single channel mode it may be okay.

    Run Memtest86+ overnight tonight and see if it finds any problems.
    You say its not installed according to specs does that mean my ram isnt faulty or is it faulty? I had 4 errors for the ram
      My System SpecsSystem Spec


  8. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,352
    Windows 10 Pro X64 14393.576
       24 Jul 2016 #8

    Any error means defective RAM. Now you need to narrow it down to the one that is bad and remove it. Leave two installed in SLOT2 and 4. If you want to add more memory then get two more 2GB of same manufacture if possible,
      My System SpecsSystem Spec


  9. Joined : Jul 2016
    Posts : 5
    Windows 10 Pro 64 bit
       24 Jul 2016 #9

    I will do as you say
      My System SpecsSystem Spec


  10. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,352
    Windows 10 Pro X64 14393.576
       25 Jul 2016 #10

    Good luck, let me know how you make out please.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Suddenly getting BSOD - worried new RAM is faulty
I have recently upgraded my RAM from 4BG to 8 and have no been getting the BSOD for the first time ever. They are never the same... I've had the IRQL_NOT_LESS_OR_EQUAL and the UNEXPECTED_KERNEL_MODE errors. I am not so computer-savvy that I...
BSOD Crashes and Debugging
Corrupted hardware or corrupted OS
Ok last week my PC ran into several major problems that left me restarting it till it reinstalled itself. It seemed to be fine, all the problems seemed to be gone, however they're more or less back and I'm thinking it's the hardware. -In the...
General Support
IRQL_NOT_LESS_OR_EQUAL and FAULTY HARDWARE CORRUPTED PAGE BSODs
Good day, I have had these 2 BSODs in the past few days on a fresh Windows 10 Pro install (not upgraded from 8.1). Attached are the dump files and they also happened while I was using Chrome. Hope there's a fix for this as it doesn't make sense...
BSOD Crashes and Debugging
Solved Windows 10 BSOD's - Driver problem or Hardware failure?
Hey there, Ive been having blue screens for quite a while now and been trying to fix them myself but Ive decided it might be easier with some assistance. Ive ran memtest86+ for a whole day and found no errors. I ran prime95 and furmark for a...
BSOD Crashes and Debugging
Solved Windows 10 - automatic repair after memtest session - hardware faulty
Hello. Eh getting weird problem with Windows 10 Pro. So few days ago when i ran memtest few hours without error, but after finished test i reboot pc and Automatiic repair started before windows. Is this something with memory ? Memory...
Performance & Maintenance
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:28.
Find Us
Twitter Facebook Google+



Windows 10 Forums