Page 2 of 2 FirstFirst 12

  1. Posts : 561
    Windows 10 Pro/Windows 7 Ultimate
       05 Feb 2018 #11

    Ztruker said: View Post
    Any error means defective RAM. Now you need to narrow it down to the one that is bad and remove it. Leave two installed in SLOT2 and 4. If you want to add more memory then get two more 2GB of same manufacture if possible,
    I ran into this issue in the last week. I ran MDSCHED, said nothing was wrong with Ram.

    But this little thing was in my System Event Log:

    A corrected hardware error has occurred.
    Reported by component: Processor Core
    Error Source: Machine Check Exception
    Error Type: Unknown Error
    Processor APIC ID: 1
    The details view of this entry contains further information.
    And the Detail View shows this:

    Log Name:      System
    Source:        Microsoft-Windows-WHEA-Logger
    Date:          2/5/2018 8:15:37 AM
    Event ID:      19
    Task Category: None
    Level:         Warning
    User:          LOCAL SERVICE
    Computer:      ASUS10-PC
    A corrected hardware error has occurred.
    Reported by component: Processor Core
    Error Source: Machine Check Exception
    Error Type: Unknown Error
    Processor APIC ID: 1
    The details view of this entry contains further information.
    Event Xml:
    <Event xmlns="">
        <Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}" />
        <TimeCreated SystemTime="2018-02-05T16:15:37.716091300Z" />
        <Correlation ActivityID="{C8249BC8-1265-4246-97C8-144AD0D638DC}" />
        <Execution ProcessID="1824" ThreadID="440" />
        <Security UserID="S-1-5-19" />
        <Data Name="ErrorSource">3</Data>
        <Data Name="ApicId">1</Data>
        <Data Name="MCABank">0</Data>
        <Data Name="MciStat">0xdc3fe1000001fbfc</Data>
        <Data Name="MciAddr">0xfbe99cbffbfd</Data>
        <Data Name="MciMisc">0x0</Data>
        <Data Name="ErrorType">256</Data>
        <Data Name="TransactionType">256</Data>
        <Data Name="Participation">256</Data>
        <Data Name="RequestType">256</Data>
        <Data Name="MemorIO">256</Data>
        <Data Name="MemHierarchyLvl">256</Data>
        <Data Name="Timeout">256</Data>
        <Data Name="OperationType">256</Data>
        <Data Name="Channel">256</Data>
        <Data Name="Length">864</Data>
        <Data Name="RawData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ata>
    I forget how to dump my logs, I used to have a script on my Desktop that did it.

    Whatever this is, it may be an OS Corruption issue. My system was running perfectly for the last 3 years since I replaced my Processor, but I had been running a Windows 7 partition that will no longer boot. In searching for "HARDWARE ERROR PAGE FAULT" it dumped me into this thread, but one other result already suggested running MDSCHED and SFC /SCANNOW. Doing Scannow right now.

    I'm in the middle of transferring everything to a new Intel 15 system, but I need this heap to continue working for a while.

    There were 3 Bugcheck Exceptions, but there were two of these in my Applications Events, suggesting a driver issue, and my drivers had been updated by a forced Windows 10 update:

    The description for Event ID 0 from source ForceWare Intelligent Application Manager (IAM) cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    Ray! StartServiceCtrlDispatcher
    But I'm not sure what driver that is. The Chipset is Forceware, so I'll have to find the Forceware Driver for this board for Windows 10.
      My ComputerSystem Spec

  2. Posts : 6,004
    Windows 10 Pro X64 17134.191
       05 Feb 2018 #12

    You had memory errors running memtest86+. That is what you need to run while removing ram until you identify the defective DIMM then replace it.
    Let's get that fixed before working on any other problems at that can be the cause of all the problems.
      My ComputersSystem Spec

  3. Posts : 561
    Windows 10 Pro/Windows 7 Ultimate
       06 Feb 2018 #13

    Ztruker said: View Post
    You had memory errors running memtest86+. That is what you need to run while removing ram until you identify the defective DIMM then replace it.
    Let's get that fixed before working on any other problems at that can be the cause of all the problems.
    No, the search I ran that pointed me here also pointed me to a result that said to run Windows Memory Check, and then run SFC after that. I did both, there were no memory errors detected. Then SFC did not find anything. Finally, I ran a DISM restorehealth. I didnt see any reason to run Memtest, seeing as it passed the MS test. If the Ram is Bad, it will error out within the first few tests.

    It's been about 36 hours since I had the last BlueScreen, and I have not had any of those Event Log Entries, not for the page fault, or the Forceware Intelligent Application Manager.

    I'm hoping it was just a software issue that was the result of a forced update to the latest version of windows 10. It really screwed me up, after the update, all of my desktop icons were bad, and Office and NOD32 all failed to start or were missing pieces of their programs. So I rolled windows back to 10240 and it fixed everything. My system has been in a semi hosed state ever since.

    This system has one AMD 4400+ CPU OC'd by 7% (for the last 12 years), and I put in two identical 2GB DDR2/800 sticks. Under Windows 10 it's been running better than it did under 7, but the forced update mangled me seriously.

    But every winter, as a ritual I have to remove my RAM from all of my PCs and reseat them. Because the nighttime temp drops to about 38 degrees F. Usually under 40 and I have to reseat the ram due to expanding or contracting. But I did not have to do that this year because it has not gone below 40 degrees.

    If the ram starts to have issues, I know what to do, but my only worry is that I replaced my CPU about 3 years ago, one of the cores fried. Got a new chip for 20 bucks, and the Ram, I bought that about 2 years ago to replace two 1GB sticks. I'm running 32 bit Windows 10 so I cant have more than 4gb, and my Asus M2N Motherboard will not accept any more than 4gb either. But I've had this board since 2005, and I know exactly how to seat the RAM. I'm just not sure about the Ram BIOS settings, I have it set up for regular dual channel operation.

    I'm not going to be running this PC much longer anyway, it's just acting as a 2nd PLEX server until I can transfer all my apps and HDDs to my new i5 Optiplex tower. That one is set up as 64bit so I can use the full 8gb of Ram.

    The next time I reboot, I'll post my RAM settings, I think that might have been part of the issue. I set it for what I understood to be Dual Channel Op, but it has a lot of strange settings in there, I've never seen on any other board.
      My ComputerSystem Spec

  4. Posts : 6,004
    Windows 10 Pro X64 17134.191
       07 Feb 2018 #14

    Okay, good luck.
      My ComputersSystem Spec

Page 2 of 2 FirstFirst 12

Related Threads
I have recently upgraded my RAM from 4BG to 8 and have no been getting the BSOD for the first time ever. They are never the same... I've had the IRQL_NOT_LESS_OR_EQUAL and the UNEXPECTED_KERNEL_MODE errors. I am not so computer-savvy that I...
Ok last week my PC ran into several major problems that left me restarting it till it reinstalled itself. It seemed to be fine, all the problems seemed to be gone, however they're more or less back and I'm thinking it's the hardware. -In the...
Good day, I have had these 2 BSODs in the past few days on a fresh Windows 10 Pro install (not upgraded from 8.1). Attached are the dump files and they also happened while I was using Chrome. Hope there's a fix for this as it doesn't make sense...
Hey there, Ive been having blue screens for quite a while now and been trying to fix them myself but Ive decided it might be easier with some assistance. Ive ran memtest86+ for a whole day and found no errors. I ran prime95 and furmark for a...
Hello. Eh getting weird problem with Windows 10 Pro. So few days ago when i ran memtest few hours without error, but after finished test i reboot pc and Automatiic repair started before windows. Is this something with memory ? Memory...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:27.
Find Us