New
#1
Random BSOD Critical Structure Error while playing videos on youtube
Im getting some random BSOD when im watching a video on youtube can someone help me figure out the problem? here are my files:
Im getting some random BSOD when im watching a video on youtube can someone help me figure out the problem? here are my files:
Hello vividort,
Welcome to the TenForums :)
I have looked at your most recent dump files and they show the following error:
There is not a lot of additional information that I am able to extract.Code:CRITICAL_STRUCTURE_CORRUPTION (109) This bugcheck is generated when the kernel detects that critical kernel code or data have been corrupted. There are generally three causes for a corruption: 1) A driver has inadvertently or deliberately modified critical kernel code or data. See Kernel patch protection for x64-based operating systems 2) A developer attempted to set a normal kernel breakpoint using a kernel debugger that was not attached when the system was booted. Normal breakpoints, "bp", can only be set if the debugger is attached at boot time. Hardware breakpoints, "ba", can be set at any time. 3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data. Arguments: Arg1: a3a01f58a18f7b4e, Reserved Arg2: b3b72bdef410466b, Reserved Arg3: 00000000000001a0, Failure type dependent information Arg4: 0000000000000007, Type of corrupted region, can be 7 : Critical MSR modification Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
I would suggest that you download and run MemTest86+ to test your RAM. Bad RAM is one possible cause.MemTest86+ - Test RAM - Windows 10 Forums
Note: Run MemTest86+ for at least 8 passes. Ideally set it running and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
Report back with the results and we'll work from there.
memtest86 doesn't boot i tried searching a solution with no sucess, what should i do?
See if this tutorial helps: USB Drive - Boot from in Windows 10
You may also need to enable Legacy boot (or Legacy mode) in BIOS.