Welcome to the TenForums
I have looked at your most recent dump files and they show the following error:
There is not a lot of additional information that I am able to extract.
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See Kernel patch protection for x64-based operating systems
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arg1: a3a01f58a18f7b4e, Reserved
Arg2: b3b72bdef410466b, Reserved
Arg3: 00000000000001a0, Failure type dependent information
Arg4: 0000000000000007, Type of corrupted region, can be
7 : Critical MSR modification
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
I would suggest that you download and run MemTest86+ to test your RAM. Bad RAM is one possible cause.MemTest86+ - Test RAM - Windows 10 Forums
Note: Run MemTest86+ for at least 8 passes. Ideally set it running and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
Report back with the results and we'll work from there.