Page 2 of 4 FirstFirst 1234 LastLast

  1. Joined : Jul 2016
    Posts : 18
    Windows 10 Pro
       09 Jul 2016 #11

    philc43 said: View Post
    Please set the resolution to your default screen resolution. This will be shown on the Advanced Display settings
    No problem. 3840x2160 (4K). Should the test run in window or full screen? I'm assuming window so that I can monitor the CPU temperatures via CPUID HWMonitor? Also, for how long should I run this test for?

    Thank you again for the quick responses. Much is appreciated.
      My System SpecsSystem Spec


  2. Joined : Nov 2015
    Posts : 1,848
    64bit Win 10 Pro ver 1607 Build 14393.693
       09 Jul 2016 #12

    Yes run windowed and then you can see the HW Monitor. There is a temperature trace that you can turn on in the Furmark test as well. I've suggested 5 min but it depends on the temperature stability really, if temperatures go above 80-85C it is best to stop the test.
      My System SpecsSystem Spec


  3. Joined : Jul 2016
    Posts : 18
    Windows 10 Pro
       09 Jul 2016 #13

    Got around 10-minutes and temperatures hit a max about 41-C (105-F). Computer is still stable after 3.5-hours of use this morning. See attached.
      My System SpecsSystem Spec


  4. Joined : Nov 2015
    Posts : 1,848
    64bit Win 10 Pro ver 1607 Build 14393.693
       09 Jul 2016 #14

    As your temperatures are quite low and stable you can run for a lot longer if you wish. It is strange that you have not had any BSOD considering they happened every few minutes before.
      My System SpecsSystem Spec


  5. Joined : Jul 2016
    Posts : 18
    Windows 10 Pro
       09 Jul 2016 #15

    Funny you should mention the BSOD. After I closed everything, the BSOD showed up again.

    I got the recent DUMP file reviewed and it's the same old:

    FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_MAE
    BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_MAE
    PRIMARY_PROBLEM_CLASS: 0x124_GenuineIntel_PROCESSOR_MAE
    FAILURE_ID_HASH_STRING: km:0x124_genuineintel_processor_mae

    Could this be related to the i7-6700k that can't display in the native 3840x2160 resolution? Should I install the GTX-980 card in my computer and validate that it's not the dedicated GPU issue, rather CPU only?
      My System SpecsSystem Spec


  6. Joined : Nov 2015
    Posts : 1,848
    64bit Win 10 Pro ver 1607 Build 14393.693
       09 Jul 2016 #16

    I'm not sure that fitting the new graphics card will help, I think it is a CPU core fault that gets corrected most of the time according to your event logs but not always - hence the BSOD.

    Can you check that all the voltages are running stable for the CPU? I assume you are not overclocking in any way? Make sure that any turbo boost settings are off for the purposes of testing.
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 10,902
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       09 Jul 2016 #17

    Hi PiCASSiMO,

    Welcome to the 10forums

    Please boot in the BIOS and let us know what the 3.3v, 5v and 12v values are.

    I have analyzed the dumps, unfortunately they are of no use because the reported error by the CPU is unknown.
    Attempting to dump the stack reveals also nothing.
    Code:
    ===============================================================================
    Section 2     : x86/x64 MCA
    -------------------------------------------------------------------------------
    Descriptor    @ ffffe00051b40138
    Section       @ ffffe00051b40280
    Offset        : 600
    Length        : 264
    Flags         : 0x00000000
    Severity      : Fatal
    
    Error         : Unknown (Proc 2 Bank 0)
      Status      : 0xf200004000010005
    Interesting to see, the system up time is almost always a max of 10 minutes, this means that either a service at boot is causing the crashes or we're dealing with a faulty hardware.
    The services at boot need a few minutes after Windows has loaded for initializing, but the services are in the POST of the boot process.
    We can try a simple diagnostic test to find out whether we're dealing with hardware or a service
    Code:
    System Uptime: 0 days 0:06:34.723
    System Uptime: 0 days 0:02:15.750
    System Uptime: 0 days 0:02:20.525
    System Uptime: 0 days 0:02:29.817
    System Uptime: 0 days 0:04:48.045
    System Uptime: 0 days 0:02:00.016
    System Uptime: 0 days 0:01:36.670
    System Uptime: 0 days 0:02:10.295
    System Uptime: 0 days 0:10:55.950
    Please remove / disable items from the startup in taskmanager
    These programs could interfere with the boot process giving you trouble and increase the boot time.




    BSOD - Crashing way too frequently in the past few weeks... Diagnostics Test BSOD - Crashing way too frequently in the past few weeks...
     Clean boot

    Please try the following:
    • Open taskmanager
      • Go to the tab startup
      • disable everything
    • Search msconfig and open it
      • Go to the tab services
      • Check 'hide microsoft services'
      • Uncheck all other services
      • Click apply and click ok
    • Reboot if asked

    See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.
    If the problem still persist, try booting in safe mode and see if the problem still persist.

    Please note, the GPU is NOT loaded in safe mode, if the CPU itself is not faulty the GPU part could be.
      My System SpecsSystem Spec


  8. Joined : Jul 2016
    Posts : 18
    Windows 10 Pro
       09 Jul 2016 #18

    philc43 said: View Post
    I'm not sure that fitting the new graphics card will help, I think it is a CPU core fault that gets corrected most of the time according to your event logs but not always - hence the BSOD.

    Can you check that all the voltages are running stable for the CPU? I assume you are not overclocking in any way? Make sure that any turbo boost settings are off for the purposes of testing.
    As you wrote this, I had installed the GTX 980. And you were correct, the BSOD came one shortly after installation. Unfortunately for me, I've got a 980 that I'm doing an RMA with. One of the fans is unbalanced and causing contact with the plastic frame, resulting in very annoying and loud noise.
      My System SpecsSystem Spec


  9. Joined : Jul 2016
    Posts : 18
    Windows 10 Pro
       09 Jul 2016 #19

    axe0 said: View Post
    Hi PiCASSiMO,

    Welcome to the 10forums

    Please boot in the BIOS and let us know what the 3.3v, 5v and 12v values are.
    Attached is the screen that you are probably requesting... in addition, I've taken several more in the attached ZIP file.

    + 3.3v = 3.383 V
    +5v = 5.100 V
    + 12V = 12.240 V

    Thank you.
      My System SpecsSystem Spec


  10. Joined : Nov 2015
    Posts : 1,848
    64bit Win 10 Pro ver 1607 Build 14393.693
       09 Jul 2016 #20

    Please follow the clean boot instructions as detailed by @axe0

    It is not necessarily the CPU that is faulty, the CPU detects and reports the faults but they could and most likely are caused by something else.
      My System SpecsSystem Spec


 
Page 2 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
BSOD Frequently with a Number of Different Causes
I moved my desktop to Windows 10 Ocotober 2015 and all was fine until about 2 or 3 weeks ago, After a Windows update the OS started to behave unpredictably and get BSODs every 5 or 10 minutes for dufferent reasons OAGE_FAULT_IN_NON_PAGED_AREA,...
BSOD Crashes and Debugging
BSOD and no won't get past boot at all
Hi guys, first time I have ever done signed up to a forum as usually i sort it myself or find the solution online. However, i have tried everything i can find online and nothing has helped. Last night I accidentally hit 'hibernate' and as i was...
BSOD Crashes and Debugging
DPC Watchdog BSOD every couple of weeks
This is very elusive and began happening after upgrading to Win 10 from 8.1 within a week of its general release. 8.1 never BSOD'ed on me, Win 10 is when it started. Out of the blue, the system will suddenly freeze (unable to move mouse pointer)...
BSOD Crashes and Debugging
Solved 2 weeks old Win10 PC getting a yellow exclamation error then BSOD
My computer was updated 2 weeks ago with no problems So far this has happened twice a get a yellow exclamation mark on the task bar when I click it to see what is wrong I get a grey lit screen with the mouse only responding no other way makes PC...
BSOD Crashes and Debugging
Remote desktop frequently crashing under windows 10
I have been using remote desktop for years to access my office computer. I recently upgraded to Windows 10. Now remote desktop is frequently crashing and kicking me out of the session. I am always able to login sometimes it crashes quickly,...
Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:17.
Find Us
Twitter Facebook Google+



Windows 10 Forums