Windows 10: Random BSODs


  1. Posts : 3
    wndows 10 64bit
       05 Jul 2016 #1

    Random BSODs


    Hi,

    a few weeks ago i build a System from scratch with this specifications: 2x Xeon E5-2630 V4, Asus Z10PE-D8 WS Mainboard, 64 Gig ECC Ram, Geforce GTX 970, Soundblaster Z, Samsung SSD 950 Pro 512GB NVMe and a bequiet 650 Watt powersupply. After 2 weeks the System became unstable and the BSODs started accouring. Sometimes the System restarts fine for 2 days and runs smoothly. I ran CPU, GPU and Ram stresstests without any findings.
    The gtx and the soundblaster are running fine in a different machine. No Errors there.
    I reinstalled Windows without the graphicscard and the soundblaster and it seemed absolute stable but useless. So i installed Windows again with all the latest Drivers with my gc and soundcard and it ran for 2 days. Now the BSODs start to reappear when i restart the System. Usually a few seconds after Windows starts. I have no clue whats going on so any help is appreciated. I got the System gathering files attached. Cheers, Martin
      My ComputerSystem Spec


  2. Posts : 2,334
    64bit Win 10 Pro ver 1703 Build 15063.296
       05 Jul 2016 #2

    All the BSOD dump files indicate a 0x124 WHEA (Windows Hardware Error Architecture) error. There is no further information in the dump files that I can find to help with the analysis. It is almost certainly hardware related but it could be a software utility program associated with the MB or graphics/sound cards attached.

    Can you determine if it is the graphics card or the soundblaster card by running with only one at a time? That will help narrow it down.
      My ComputerSystem Spec


  3. Posts : 11,514
    Windows 10 Pro
       05 Jul 2016 #3

    I ran CPU, GPU and Ram stresstests without any findings.
    What tests did you perform and what exactly were the results? We'd like to know details about the tests and like to see logs or screenshots/photos of the tests.

    There are WER logs about bad dump files what is an indication towards faulty memory, this is another reason why details about the performed tests is important.
    Code:
    Windows Error Reporting:
    +++ WER0 +++:
    Fehlerbucket BAD_DUMPFILE, Typ 0
    Ereignisname: BlueScreen
    Antwort: Nicht verfügbar
    CAB-Datei-ID: 22eefd03-988d-4d0a-80bf-7a93ed017d57
    
    Problemsignatur:
    P1: 124
    P2: 0
    P3: ffffe000d1a8c028
    P4: fa08cdc0
    P5: 20e0f
    P6: 10_0_10586
    P7: 0_0
    P8: 256_1
    P9: 
    P10: 
    
    Angefügte Dateien:
    C:\Windows\Minidump\070516-6828-01.dmp
    C:\Windows\Temp\WER-8500-0.sysdata.xml
    C:\Windows\Temp\WER228B.tmp.WERInternalMetadata.xml
    
    Diese Dateien befinden sich möglicherweise hier:
    
    
    Analysesymbol: 
    Es wird erneut nach einer Lösung gesucht: 1
    Berichts-ID: 3c026cd6-2fa6-4deb-b16c-c9e342a4f539
    Berichtstatus: 0
    Bucket mit Hash:
    Besides of that the dumps show a no-timeout error on a bus, I did not properly check which bus it is but likely the one closest to the memory.
      My ComputersSystem Spec


  4. Posts : 3
    wndows 10 64bit
    Thread Starter
       05 Jul 2016 #4

    @philc43 : i will give this a try again. Is there a program you know of that is starting/restarting the pc continously so i can see if it boots up stable?

    @axe0 : i ran an Intel stress test program (forgot the Name) on the last Installation. Ram and CPU. I ran furrmark for the gpu. I did heavy fluidsims and 3d Rendering and the System never crashed on those occasions. Usally it just doesnt boot properly or gets a bsod a few seconds to a Minute after launching Windows.

    Do you guys have any recomendations concerning Ram, Cpu and Gpu Tests?

    Cheers, Martin
      My ComputerSystem Spec


  5. Posts : 11,514
    Windows 10 Pro
       05 Jul 2016 #5

    For furmark it is mainly the temperature you need to look at, not errors as I've only seen once an error from it.

    Intel burntest I think? If so then it is the same as for furmark.

    For the memory MemTest86+ is better to use.



    Random BSODs Diagnostic Test Random BSODs
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec


  6. Posts : 3
    wndows 10 64bit
    Thread Starter
       05 Jul 2016 #6

    The temperatures were fine at all Tests. The gpu was never above 67° and the fan stayed at 39%. The same for both the cpus. They were way inside the tollerance. The 2 big noctua fans are doing their Job. I ll try to run the mem test next and run the System without soundcard and without grafixcard. thx for the help so far!
      My ComputerSystem Spec


 

Related Threads
Solved Random BSODs in BSOD Crashes and Debugging
Hello, I'm having trouble with my new PC I assembled few days ago. In many situations I had BSODs while playing, browsing net or even in idle. As IT guy I can't even think of it, because all of STOP codes are different! My RAM is ok, disk also,...
Random BSODs Throughout The Day in BSOD Crashes and Debugging
69824 Hi All, As the title says, I am getting random BSODs throughout the day on my machine. Funny part is that I haven't actually seen what the BSOD errors are; I'll just step away from my computer and it's restarted because of BSOD. You'll...
Random BSODs in BSOD Crashes and Debugging
We recently upgraded this machine from Windows 7 to Windows 10. Now every once in awhile we will get a seemingly random blue screen. I believe it is either bad memory or a driver, but can use a little help to figure out which it is. Thank you,...
Random BSODs in BSOD Crashes and Debugging
Hi hope u guys can help me. would be very thankful :) Got a new system 1-2 Months old. Fresh installed Windows 10 Pro Build 1511. But I am getting Bluescreens (not sure what the cause is) random. For example once I plugged in an USB-Stick I got...
Random BSODs in BSOD Crashes and Debugging
Hi folks! I installed Win 10 on my home server and it keeps crashing all the time with random BSODs (with a bunch of different error messages). Before that, it was running fine on Win Home Server 2011. I tried a bunch of driver combinations...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:47.
Find Us