BSOD in Desktop

rstudio · 30 Jul 2016

I have update, or better, install the driver's for the keyboard and mouse, because i always use the driver's that windows give us.
Before this instalation , again on turn on the pc, another BSOD, before it get to windows desktop.

Now i have install the mouse and keyboard, the sound card (Edirol UA-4fx) and the speaker's (logitech) say (in their official page) that there is no need software, windows 10 will install it, so there is no software to download.

The asus USB driver's for my board, there is no support for Win10, not even for Win8.
What should i do ?

ASUS Portugal

axe0 · 30 Jul 2016

There is one for Windows 7, but most likely too old for Windows 10 giving more problems.

My current thoughts are:
- We're facing a cause without a proper solution, incompatibility with the only solution being reverting back to a previous OS.
- Mixed memory, I can't verify this as the information I can see is not enough but IME mixed memory can cause a hell of problems.
The information I get, basically the same as in your 'My System Specs'

Code:

[Memory Device (Type 17) - Length 27 - Handle 003ch]
  Physical Memory Array Handle  003ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          1024MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM0
  Bank Locator                  BANK0
  Memory Type                   12h - DDR
  Type Detail                   0080h - Synchronous
  Speed                         1066MHz
  Manufacturer                  Manufacturer0
  Serial Number                        
  Asset Tag Number                          
  Part Number                   PartNum0
[Memory Device (Type 17) - Length 27 - Handle 003eh]
  Physical Memory Array Handle  003ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          2048MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM1
  Bank Locator                  BANK1
  Memory Type                   12h - DDR
  Type Detail                   0080h - Synchronous
  Speed                         1066MHz
  Manufacturer                  Manufacturer1
  Serial Number                        
  Asset Tag Number                          
  Part Number                   PartNum1
[Memory Device (Type 17) - Length 27 - Handle 0040h]
  Physical Memory Array Handle  003ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          1024MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM2
  Bank Locator                  BANK2
  Memory Type                   12h - DDR
  Type Detail                   0080h - Synchronous
  Speed                         1066MHz
  Manufacturer                  Manufacturer2
  Serial Number                        
  Asset Tag Number                          
  Part Number                   PartNum2
[Memory Device (Type 17) - Length 27 - Handle 0042h]
  Physical Memory Array Handle  003ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          2048MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM3
  Bank Locator                  BANK3
  Memory Type                   12h - DDR
  Type Detail                   0080h - Synchronous
  Speed                         1066MHz
  Manufacturer                  Manufacturer3
  Serial Number                        
  Asset Tag Number                          
  Part Number                   PartNum3

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

CPU
Mainboard
Memory
SPD*
Graphics

*SPD shows the details of each stick, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each stick.

Please post each screenshot in your next reply/replies.

rstudio · 30 Jul 2016

ok, thank you again for all your work!

axe0 · 30 Jul 2016

Please remove the Team Group Inc. memory sticks for testing, if it doesn't improve then we might be facing compatibility issues.

rstudio · 31 Jul 2016

ok , i will do that.
Today have another BSOD. I have the USB connect , mouse, keyboard, and Edirol soundcard.
When restart from that BSOD, it show another blue screen, but diferent, do not show that percentage grow, 50% etc, and say something like this, : ( windows cannot start, please restart ) so i think it did not create dump file.

Then when restart again, windows start in big letter's, low resolution, with this error. it's not the first time.

It's in portuguese but say something like this " there is no graphic drivers from AMD install or they are not work ok.
Install the proper AMD driver for the hardware"

axe0 · 01 Aug 2016

I can't remember to have given a display uninstall suggestion for some time in this thread. I assume this message showed up without uninstalling the drivers?

rstudio · 01 Aug 2016

Yes Axe0 it's true, i did not unistall amd driver's. But even if i unistall it accidentally, windows will never give this error, or any error.
In this Thread, i think i have talk about this, this is not the first time that append. when this append i now that if i restart pc, will fix the "low resolution" and the error message, and windows start "normal".
That is why in first i thought that maybe could be the graphic card problem.

Today on start pc, i have 3 BSOD before see the desktop after windows logotip.
One is that without percentage like show first image below.
The second image is from third BSOD, the first BSOD say " IRQL NOT LESS OR EQUAL"

rstudio · 04 Aug 2016

Hi again.
I hope you read my last post.

Today, again on start up pc, another BSOD before see the windows desktop.
USB i have only keyboard, mouse, soundcard edirol.
Ram i have all the 6GB.

Now *before post this* i have remove the Team Group 1GB x2 memory sticks like you said.
lets see what append

axe0 · 04 Aug 2016

What was the situation with the GPU? You never mentioned if seating the GPU in a different system or trying another GPU helped :)

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BugCheck 1E, {ffffffffc0000005, fffff800bcd0afe0, 1, 105}

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

I'm seriously thinking your system is not in the mood (to say it nice :)) for Windows 10 10586 <your Windows version>

rstudio · 05 Aug 2016

I have not try another GPU, i have another but it's older that this, and is in another pc with windows 10 too.

So do you think, Change the Graphic card may not be sufficient to run Windows 10 ?
The best way is another board, memory and graphic card ?

Or maybe migrate to win7 , right ?

thank you