Windows 10: BSOD in Desktop

Page 4 of 10 FirstFirst ... 23456 ... LastLast

  1. Posts : 11,492
    Windows 10 Pro
       08 Jul 2016 #31

    Please post the pics in a new reply
      My ComputersSystem Spec


  2. Posts : 52
    Microsoft Windows 10 Pro 64-bit
    Thread Starter
       08 Jul 2016 #32

    Ok, there it is, i have a temperature warning in WD5000AAKS of 55C, and a firmware update in seatools, that i did not update.
      My ComputerSystem Spec


  3. Posts : 11,492
    Windows 10 Pro
       08 Jul 2016 #33

    Am I guessing it right that you've performed chkdsk in Windows Explorer?

    If so, please enter following commands
    Code:
    chkdsk C: /r
    The partition needs to be unmounted, please enter Y to schedule it on reboot and reboot your system.
    It could take several hours for the command to finish, please just let it run even when it may look like it is stuck or frozen.

    Please run this command for all partitions and upload the logs

    A thing to add, please keep an eye on the spin retry count attribute on the ST3500320AS. Increasement of the amount of spin retries indicates that the hard drive mechanism fails what means that the hard drive would need to be replaced or removed.
      My ComputersSystem Spec


  4. Posts : 52
    Microsoft Windows 10 Pro 64-bit
    Thread Starter
       09 Jul 2016 #34

    Yes you are right, i have done it in HDD properties like step one in this tutorial.
    Disk Check - Windows 7 Help Forums

    CHKDSH its Only to run on disk C ? disk C its a SSD, i will run it and post here.

    Thank you axe0
      My ComputerSystem Spec


  5. Posts : 11,492
    Windows 10 Pro
       09 Jul 2016 #35

    Quote:
    Please run this command for all partitions and upload the logs
      My ComputersSystem Spec


  6. Posts : 52
    Microsoft Windows 10 Pro 64-bit
    Thread Starter
       09 Jul 2016 #36

    I know, but because your code it-s only to disk C: , i thought the other-s HDD have a good log.
    Ok ,there it is the disk C:.
    I will do it on other-s
      My ComputerSystem Spec


  7. Posts : 11,492
    Windows 10 Pro
       09 Jul 2016 #37

    That was only as example, I didn't find it worthy to write it down for every partition you have

    Thank you for the chkdsk log, Windows has changed a few things.
    You may want to run chkdsk a few times on each partition, it'll help with the file system health
    Code:
    Checking file system on C:
    The type of the file system is NTFS.
    
    A disk check has been scheduled.
    Windows will now check the disk.                         
    
    Stage 1: Examining basic file system structure ...
      272896 file records processed.                                                         File verification completed.
      11685 large file records processed.                                      0 bad file records processed.                                      
    Stage 2: Examining file name linkage ...
      352066 index entries processed.                                                        Index verification completed.
      0 unindexed files scanned.                                           0 unindexed files recovered to lost and found.                     
    Stage 3: Examining security descriptors ...
    Cleaning up 847 unused index entries from index $SII of file 0x9.
    Cleaning up 847 unused index entries from index $SDH of file 0x9.
    Cleaning up 847 unused security descriptors.
    CHKDSK is compacting the security descriptor stream
    Security descriptor verification completed.
      39586 data files processed.                                            CHKDSK is verifying Usn Journal...
      40494056 USN bytes processed.                                                            Usn Journal verification completed.
    
    Stage 4: Looking for bad clusters in user file data ...
      272880 files processed.                                                                File data verification completed.
    
    Stage 5: Looking for bad, free clusters ...
      20225629 free clusters processed.                                                        Free space verification is complete.
    Correcting errors in the master file table's (MFT) BITMAP attribute.
    Correcting errors in the Volume Bitmap.
    
    Windows has made corrections to the file system.
    No further action is required.
    
     116655100 KB total disk space.
      35240028 KB in 186054 files.
        127528 KB in 39589 indexes.
             0 KB in bad sectors.
        385028 KB in use by the system.
         65536 KB occupied by the log file.
      80902516 KB available on disk.
    
          4096 bytes in each allocation unit.
      29163775 total allocation units on disk.
      20225629 allocation units available on disk.
    
    Internal Info:
    00 2a 04 00 21 71 03 00 c0 a0 06 00 00 00 00 00  .*..!q..........
    99 01 00 00 6d 65 00 00 00 00 00 00 00 00 00 00  ....me..........
    
    Windows has finished checking your disk.
    Please wait while your computer restarts.
      My ComputersSystem Spec


  8. Posts : 52
    Microsoft Windows 10 Pro 64-bit
    Thread Starter
       09 Jul 2016 #38

    Ok , i see, thank you.
    One thing , you talk about keep an eye on the spin retry count attribute on the ST3500320AS, how can i do that, run HDD tune on occasion, or how ? And how to see if it-s bad, or need to replace the HDD ?

    thank you
      My ComputerSystem Spec


  9. Posts : 11,492
    Windows 10 Pro
       09 Jul 2016 #39

    Once in a short while open HDTune and check if either of the values of the SRC changes.
    Remember to make a screenshot of it or note the values down.
    If you're wondering what those parameters such as threshold and data mean
    http://www.hdtune.com/hdtune.html
    The table shows the following parameters:
    - ID: parameter which is being measured
    - Current: current value
    - Worst: the worst value which has been recorded since the hard disk was first used
    - Threshold: the value of any of the parameters should never get below the threshold.
    - Data: shows the usable data which belongs to the ID.
    - Status: status of the parameter (OK or failed).
    A FYI for why I tell you to keep an eye on it, from the HDTune FAQ
    If the parameter is highlited in yellow it means that the parameter almost reached a critical value. At this point it is highly recommended to check this parameter regulary to see if the value becomes worse.

    If the parameter is highlited in red it means that the parameter has reached a critical value. In this case you should make a backup of your data and replace the hard disk.
      My ComputersSystem Spec


  10. Posts : 52
    Microsoft Windows 10 Pro 64-bit
    Thread Starter
       10 Jul 2016 #40

    Understood, thank you axe0.
    There it is, the log off all HDD.
      My ComputerSystem Spec


 
Page 4 of 10 FirstFirst ... 23456 ... LastLast

Related Threads
Hi there, My PC is reasonably mature now and after getting a few BSOD's I just thought I was getting a little unlucky every so often. However they are now increasing in frequency and I can't seem to see a recurring theme in-between them. ...
Solved BSOD - windows 10 frozen & no desktop in BSOD Crashes and Debugging
This is my first problem with Win 10 and its Serious! Windows won't re-load properly, so no access to files, error logs or anything. I upgraded to W10 from W7 on a 5-year old desktop computer about 2 months ago. (W7 often went blue-screen on...
Sorry - see Forum BSOD.
Solved BSoD Memory Management at Desktop + Ingame in BSOD Crashes and Debugging
Hey guys, I built a new PC and now I have some troubles getting it to work. I get so many bluescreens, most of them appear when I am on the desktop a few minutes after the PC starts (sometimes I can start playing games, but after a few minutes...
Solved 10041 flashing screen between desktop and BSOD in BSOD Crashes and Debugging
I loaded 10041 over an 8.1 installation. No visible errors. Login was fine. As soon as the desktop starts to load, there is a flashing back and forth with the BSOD. The flashing to the BSOD occurs before any of the icons can load. (making the log...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:35.
Find Us