37 Crashes from Wide Range of Error Codes (0x0d1, 0x00a, 0x0109)

Page 3 of 4 FirstFirst 1234 LastLast

  1. Posts : 21
    Windows 10 Professional
    Thread Starter
       #21

    I have a crash report. Bug Code 0x0A
      My Computer


  2. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #22

    Driver Verifier was setup correctly but the dump was not DV induced. It's another memory_corruption.

    Did you ever validate the memory DIMM in slot 3 (you have slots 0 to 3 with 1 and 3 populated with identical nodules).
      My Computers


  3. Posts : 21
    Windows 10 Professional
    Thread Starter
       #23

    ...I only have 2 slots. It says I have 4?
      My Computer


  4. Posts : 21
    Windows 10 Professional
    Thread Starter
       #24

    Also, I validated both DIMM, and both slots
      My Computer


  5. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #25

    Yes, the dump indicates 4 memory slots. Obviously wrong, I wonder why?

    Code:
    [Memory Device (Type 17) - Length 34 - Handle 0025h]
      Physical Memory Array Handle  0023h
      Memory Error Info Handle      [Not Provided]
      Total Width                   [Unknown]
      Data Width                    64 bits
      Size                          [Not Populated]
      Form Factor                   02h - Unknown
      Device Set                    [None]
      Device Locator                Node0_Dimm0
      Bank Locator                  Node0_Bank0
      Memory Type                   02h - Unknown
      Type Detail                   0000h -
      Speed                         0MHz
      Manufacturer                  Dimm0_Manufacturer
      Serial Number                             
      Asset Tag Number                            
      Part Number                   Dimm0_PartNum
    [Memory Device (Type 17) - Length 34 - Handle 0027h]
      Physical Memory Array Handle  0023h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          8192MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                Node0_Dimm1
      Bank Locator                  Node0_Bank0
      Memory Type                   18h - Specification Reserved
      Type Detail                   4080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  Undefined         
      Serial Number                             
      Asset Tag Number                            
      Part Number                   8GBH2X04E9992
    [Memory Device (Type 17) - Length 34 - Handle 0029h]
      Physical Memory Array Handle  0023h
      Memory Error Info Handle      [Not Provided]
      Total Width                   [Unknown]
      Data Width                    64 bits
      Size                          [Not Populated]
      Form Factor                   02h - Unknown
      Device Set                    [None]
      Device Locator                Node0_Dimm2
      Bank Locator                  Node0_Bank0
      Memory Type                   02h - Unknown
      Type Detail                   0000h -
      Speed                         0MHz
      Manufacturer                  Dimm2_Manufacturer
      Serial Number                             
      Asset Tag Number                            
      Part Number                   Dimm2_PartNum
    [Memory Device (Type 17) - Length 34 - Handle 002bh]
      Physical Memory Array Handle  0023h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          8192MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                Node0_Dimm3
      Bank Locator                  Node0_Bank0
      Memory Type                   18h - Specification Reserved
      Type Detail                   4080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  Undefined         
      Serial Number                             
      Asset Tag Number                            
      Part Number                   8GBH2X04E9992
    Try running again with Driver Verifier enabled. See if anything shows this time.

    Looked at one of the older dumps from Thu Jun 23 16:37:36. It indicates a problem with your video card/driver:
    Code:
    ffffd001`639f7518  fffff800`9656c676Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
     atikmdag+0x14c676
    Looks like you have a AMD Radeon(TM) R7 Graphics. The driver is version 16.150.2211.0 dated 21-Mar-16 12:00:00 AM. 16.15.2211 is the latest version available. Do you know when you updated to that version?
    You can try rolling back the driver from Device Manager, see if that makes a difference.

    You can also try to stress test your GPU:

    FurMark - GPU Stress Test - Windows 10 Forums
      My Computers


  6. Posts : 21
    Windows 10 Professional
    Thread Starter
       #26

    Okay, I will try to wipe AMD Graphics, because I can't get CCC to open up. Also, I have an APU, so not sure how I would stress-test something that I don't have. Or is the process the same?
      My Computer


  7. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #27

    FurMark doesn't mention APU at all so I don't know. You can try it, just monitor the temps and stop if they get to high. You would normally do this anyway.

    You could try UNIGINE 3D Benchmark. I just downloaded and ran their Heaven Benchmark. My GPU temp stabilized at 69C:

    Attachment 88550

    Only ran for 4 minutes or so.
      My Computers


  8. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #28

    Got a recommendation for you to do the following from Arc, one of the BSOD Gurus here:


    1. Disable XMP, run the RAM at 1333 MHz.
    2. Remove a RAM stick from one slot, let the computer run with single channel memory.
    3. Make it sure that PNY XLR8 is listed in the Memory Support List.
      My Computers


  9. Posts : 21
    Windows 10 Professional
    Thread Starter
       #29

    Okay, will try that.
      My Computer


  10. Posts : 21
    Windows 10 Professional
    Thread Starter
       #30

    Tried that. BIOS won't let me change any of the memory settings. It won't let me drop down to a lower MHz, it won't let me change any of the power settings. And XMP was disabled upon me checking.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:38.
Find Us




Windows 10 Forums