Multiple BSODs since clean install Solved

  1. Posts : 4
    Windows 10 Professional 64-bit
       26 Jun 2016 #1

    Multiple BSODs since clean install


    I'm spent, hopefully the experts can help :)

    I did a clean install of Windows 10 a few days ago since I was BSODing like crazy, but they're still happening. I'm not well versed in reading the dumps or crash logs.

    BlueScreenView tells me that all BSODs are caused by driver ntoskrnl.exe.

    Thanks in advance!
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,781
    Windows 10 Pro
       26 Jun 2016 #2

    Hi iCataracts,

    Welcome to the 10forums :)

    I would suggest to run MemTest86+ per below instructions & update the BIOS to the most recent stable version.
    GIGABYTE - Motherboard - Socket 1150 - GA-H87-D3H (rev. 1.x)

    Many, if not all, crashes are memory related crashes.
    The 0x1A & 0x12B are a strong lead to faulty memory, 0x12B are often caused by faulty memory as the name says FAULTY_HARDWARE_CORRUPTED_PAGE
    The 0x3B is mainly caused by memory violations in handling or accessing, the 0x7E shows memory violations too.
    The 0x50 has quite a few causes, but it comes down to memory violations too.

    Multiple BSODs since clean install Diagnostic Test Multiple BSODs since clean install

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Make a photo of the result and post it.

    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec

  3. Posts : 4
    Windows 10 Professional 64-bit
    Thread Starter
       26 Jun 2016 #3

    Thanks for the reply axe0.

    I don't know why I didn't think to run Memtest86 before, turns out one of my ram sticks is faulty. I've taken it out and am running on 8gb for now. Cheers for the help!
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,781
    Windows 10 Pro
       27 Jun 2016 #4

    You're welcome :)
      My ComputersSystem Spec


Related Threads
So I got a new laptop - MSI Dominator Pro GT72. I added two 8GB sticks of RAM on top of the current 16GB currently in it. It also had two Kingston m.2 SSDs in RAID 0. It was running with out any problems what so ever. I decided after that I actually...
Multiple BSODs After Windows 10 Clean Install in BSOD Crashes and Debugging
I recently upgraded from Windows 8.1 to Windows 10 via a clean install. Ever since I have been getting multiple BSODs for what appears to be all different reasons. My system worked fine before this. The BSODs seem to be random. I have tried...
Hello, I need help ! Trying to figure out whats wrong with my skylake build. First had an MSI M5 board in it but after a stream of BSODs I replaced it with an Asus Pro Gaming board and made a clean install. Everything was fine again. Now 2...
I have a Dell Inspiron 17 5748 laptop, and just installed a new SSD disk. The old HDD is now running in place of ODD. Since then I get frequent BSODs. I don't think it has something to do with SSD, but who knows. Already tried: CHKDSK on both...
Hi Forum Hope it is OK to start a new thread - did look through and don't think the others are an exact match. My laptop is running well on W10 with NVIDIA GTX 680M but my desktop, with a GTX 480, is really struggling. I note there are lots of...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:52.
Find Us