This DMP file set will show a BSOD that happened just minutes before. I have used every OS that Microsoft has ever published and I have had more trouble with Windows 10 then any GUI MS OS to date. Oh one more thing the installation of Windows 10 was a clean install from DVD, The free online update was not working out.
Attachment 85729
Thanks in advance.
You have got various different bugcheck codes within a short interval. Such as ....
- DRIVER_IRQL_NOT_LESS_OR_EQUAL (0xD1)
- SYSTEM_SERVICE_EXCEPTION (0x3B)
- SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (0x1000007E)
- IRQL_NOT_LESS_OR_EQUAL (0xA)
So the first notion goes to a failing memory.
Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Take a camera snap of the memtest86+ window before closing the program. Let us see it.
We will decide our next course of action based on the result.
I have had considerable trouble getting memory sticks to work, The Adata DRAM is on the approved list for ASUS and they report correctly. Will do as you suggest.
Just letting Memtest86+ run currently at 22 passes with no errors. Before I send you a screen shot should I enable the SMP test?
Must not have the utility configured right. I was wondering, AMD has a similar thing and for a full test it takes something like 24 hours to go completely through the CPU, GPU, and RAM. I have a quick boot from BIOS I have been using. From there it boots from my USB drive.
OK that is what I thought from instructions. Running it again and it is just at 8 min's run time it is at 18 passes, that is in the top block it seems to be concerned with the AMD FX- 9590. in the block below it is running with no recorded passes, and zero errors is this what I should be looking at?
Thanks that cleared it up.
Quote