Booting to black screen with cursor

  1.    17 Jun 2016 #1

    Booting to black screen with cursor

    Hello and thank you all for any help or ideas. In general, on startup my computer is 'scanning and repairing' drives, then booting into a black screen with cursor. I don't have a pc easily available to install usb boot programs but have tried a couple thus far. Refreshing or restoring are not good options for me because i am afraid i will loose much of my software licensed to me long ago from school, which is more valuable than the computer. Figured Id ask around before taking it in. Here are the details..

    HP dv7t-7000 notebook from 2012 running windows 7
    Intel core i7-3720QM cpu @2.6ghz
    8192 mb ram
    Hdd are two ATA
    Bios id f.13

    6 weeks ago it auto updated to windows 10 build 7600
    1 week ago it started having trouble starting up
    -i believe it said something about 'initialize error' on startup screen and went into 'windows repair' for some time.
    After that on startup it will briefly say 'disk checking' then 'scanning and repairing drive:' d, sometimes c, and (\\?\volume.. then the windows startup login sound but just a black screen with movable cursor.
    I had read that this can be a driver issue, so i have tried logging in blind, clicking around, switching the screen projection, and leaving it over night all multiple times to no avail, just the black screen.

    Tried multiple cold boots

    Booting into safe mode gives me black screen with cursor and safe mode text in the corners but nothing more.
    Safe mode with command brings same but with 'hp recovery manager' window which upon exiting only reboots or turns off.

    'Hp recovery manager' window cannot find any system restore points even though I created one just days before this began.

    Booting into hp advanced system diagnostics: ran multiple start-up, run-in, system tune up, hard disk, memory and battery tests, all came back good.

    Booting into advanced system startup: no restore points, tried to roll back to last build but recieved error, system repair yields nothing new. System refreshing or restoring are not my favorite options right now.

    (via these instructions: ) Booted through usb to windows 10 media creation tool, repair my computer, command prompt, commands:
    bcdedit /set {default} bootmenupolicy legacy
    But i recieved an error

    Booted through usb memtest86, ran three times with many passes, found zero errors.

    Soon i will try lighting some candles and performing an exorcism.

    Hoping to hear something I have overlooked. What do you guys think?
    Thanks again,
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,783
    Windows 10 Pro
       18 Jun 2016 #2

    Please try to upgrade again, this is basically the same as a clean installation except that you keep all your stuff :)
    Folllow the tutorial carefully.
    Windows 10 - Upgrade Installation - Windows 10 Forums
      My ComputersSystem Spec

  3.    19 Jun 2016 #3

    Thanks, I think i will give it a try tomorrow.
      My ComputerSystem Spec


Related Threads
One of my coworkers recently bought a new Toshiba laptop. He has only had it a few months before one day he turned his comp on and it loaded into starting recovery repair or something along those lines. he tried turning it on and off a few times...
Hey everyone. I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the...
Hi, my PC has been acting up for about a week now. I have 2 Samsung 24inch Monitors and a decent gaming PC. I have tried all the options this forums has brought to me such as control alt delete and recovery mode, nothing has worked so far. i have...
Hi all, I wanted to know if anyone could help with the below. I currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only...
I recently upgraded to Windows 10 from the taskbar on my desktop. The upgrade was successful and I was able to use my computer normally. Today, when I started my computer, a disk check was started. After a long time of being stuck at 10%, I force...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:11.
Find Us