New
#41
That dump shows a single bit memory failure.
Also shows your PC is slightly under clocked. Check BIOS and set all clocking and voltages to default.
Looks like you have 8GB of ram, 4 x 2GB DIMMs. Please test the ram.Code:2: kd> !sysinfo cpuspeed CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz" MaxSpeed: 3400 CurrentSpeed: 3392
===================================================
RAM:
Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums
Information
MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:
- RAM will accept and keep random patterns of data sent to it
- There are no errors when different parts of memory try to interact
- There are no conflicts between memory addresses
Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.
Warning
MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.
If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.
Note
MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.
Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.