Windows 10 multiple BSODs

  1. Posts : 3
    Windows 10

    Windows 10 multiple BSODs

    Had lots of trouble with this computer before and it ran fine after posting on sevenforums. Upgraded to Windows 10 about a month ago and been running great ever since. Now it has decided to start blue screening again.
      My Computer

  2. Posts : 14,040
    Windows 11 Pro X64 22H2 22621.1848

    Please fill out System Specs for tenforums:

    See here: System Specs - Fill in at Ten Forums

    Dumps show different Microsoft files causing the BSODs which typically means something e3lse is the real cause.


    If you are overclocking, set all the hardware components to their defaults.

    Test your RAM modules for possible errors.
    MemTest86+ - Test RAM
    Run memtest86+ for at least 8 consecutive passes.

    If it starts showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    Stress test the Graphics Card using Furmark.
    FurMark - GPU Stress Test
    Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

    Stress test the CPU.
    Prime95 - Stress Test Your CPU
    It saves the result as a .txt file in the prime95's folder. Upload the file for us.

    Lastly, If over clocking is the cause of the problem, then post here: PC Custom Builds and Overclocking to get help with over clocking.

    If not, try running with Driver Verifier to see if that shakes out a defective driver:

    Driver Verifier is a diagnostic tool built into Windows 10, it is designed to verify both native Microsoft drivers and third party drivers. Driver Verifier's verification process involves putting heavy stress on drivers with the intention of making bad, outdated, incompatible or misbehaving drivers fail. The required result is a BSOD (Blue Screen of Death) which will generate a crash dump for debugging purposes.
    Machines exposed to Driver Verifier will run very sluggishly due to the stress being applied to the drivers.

    Driver Verifier - Enable and Disable in Windows 10

    It is not advised to run Driver Verifier for more than 48 hours at a time. Disable Driver Verifier after 48 hours or after receiving a BSOD, whichever happens soonest.

    Always create a Restore Point prior to enabling Driver Verifier.
    Last edited by Ztruker; 12 Jun 2016 at 20:39.
      My Computers

  3. Posts : 3
    Windows 10
    Thread Starter

    Filled them out.
      My Computer

  4. Posts : 14,040
    Windows 11 Pro X64 22H2 22621.1848

    Sorry, I was updating my previous post while you were filling out your System Specs.

    Please re-read my previous post.
      My Computers

  5. Posts : 3
    Windows 10
    Thread Starter

    Driver verifier seemed to do the trick. I've attached the new package of data with the dump file made by the driver verifier.
      My Computer

  6. Posts : 14,040
    Windows 11 Pro X64 22H2 22621.1848

    The latest dump indicates scpvbus.sys has a problem.

    Product: Scp Virtual Bus Driver
    Company: Scarlet.Crush Productions
    Description: Scp Virtual Bus Driver
    Driver is old, Sun May 05 17:31:26 2013.

    I think this has something to do with a Playstation. Needs to be removed or updated.
      My Computers


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:40.
Find Us

Windows 10 Forums