1.    12 Jun 2016 #1
    Join Date : Jun 2016
    Posts : 3
    Windows 10

    Windows 10 multiple BSODs


    Had lots of trouble with this computer before and it ran fine after posting on sevenforums. Upgraded to Windows 10 about a month ago and been running great ever since. Now it has decided to start blue screening again.
      My ComputerSystem Spec
  2.    12 Jun 2016 #2
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,251
    Windows 10 Pro X64 15063.483

    Please fill out System Specs for tenforums:

    See here: System Specs - Fill in at Ten Forums

    Dumps show different Microsoft files causing the BSODs which typically means something e3lse is the real cause.

    fileinfo.sys
    ntkrnlmp.exe
    FLTMGR.SYS

    Overclocking:
    If you are overclocking, set all the hardware components to their defaults.

    Test your RAM modules for possible errors.
    MemTest86+ - Test RAM
    Run memtest86+ for at least 8 consecutive passes.

    If it starts showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    Stress test the Graphics Card using Furmark.
    FurMark - GPU Stress Test
    Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

    Stress test the CPU.
    Prime95 - Stress Test Your CPU
    It saves the result as a .txt file in the prime95's folder. Upload the file for us.

    Lastly, If over clocking is the cause of the problem, then post here: PC Custom Builds and Overclocking to get help with over clocking.

    If not, try running with Driver Verifier to see if that shakes out a defective driver:

    Driver Verifier is a diagnostic tool built into Windows 10, it is designed to verify both native Microsoft drivers and third party drivers. Driver Verifier's verification process involves putting heavy stress on drivers with the intention of making bad, outdated, incompatible or misbehaving drivers fail. The required result is a BSOD (Blue Screen of Death) which will generate a crash dump for debugging purposes.
    Machines exposed to Driver Verifier will run very sluggishly due to the stress being applied to the drivers.

    Driver Verifier - Enable and Disable in Windows 10

    Warning:
    It is not advised to run Driver Verifier for more than 48 hours at a time. Disable Driver Verifier after 48 hours or after receiving a BSOD, whichever happens soonest.

    Always create a Restore Point prior to enabling Driver Verifier.
    Last edited by Ztruker; 12 Jun 2016 at 20:39.
      My ComputersSystem Spec
  3.    12 Jun 2016 #3
    Join Date : Jun 2016
    Posts : 3
    Windows 10
    Thread Starter

    Filled them out.
      My ComputerSystem Spec
  4.    12 Jun 2016 #4
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,251
    Windows 10 Pro X64 15063.483

    Sorry, I was updating my previous post while you were filling out your System Specs.

    Please re-read my previous post.
      My ComputersSystem Spec
  5.    14 Jun 2016 #5
    Join Date : Jun 2016
    Posts : 3
    Windows 10
    Thread Starter

    Driver verifier seemed to do the trick. I've attached the new package of data with the dump file made by the driver verifier.
      My ComputerSystem Spec
  6.    15 Jun 2016 #6
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,251
    Windows 10 Pro X64 15063.483

    The latest dump indicates scpvbus.sys has a problem.

    Code:
    Product: Scp Virtual Bus Driver
    Company: Scarlet.Crush Productions
    Description: Scp Virtual Bus Driver
    Version: 1.0.0.103
    Driver is old, Sun May 05 17:31:26 2013.

    I think this has something to do with a Playstation. Needs to be removed or updated.
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
Multiple BSODs After Windows 10 Clean Install
I recently upgraded from Windows 8.1 to Windows 10 via a clean install. Ever since I have been getting multiple BSODs for what appears to be all different reasons. My system worked fine before this. The BSODs seem to be random. I have tried...
BSOD Crashes and Debugging
Multiple BSODs, now can't load Windows
Hey guys! I'm really hoping you can solve a problem that I've spent the past 16 hours wrestling with. This morning my PC hard crashed,. I didn't think anything of it, restarted and got back to work. About an hour later it hard crashed again,...
BSOD Crashes and Debugging
Multiple BSODs in a fresh install of Windows 10
I have a Dell Inspiron 17 5748 laptop, and just installed a new SSD disk. The old HDD is now running in place of ODD. Since then I get frequent BSODs. I don't think it has something to do with SSD, but who knows. Already tried: CHKDSK on both...
BSOD Crashes and Debugging
Bsod Windows 10 Multiple Bsods Please Help
so in the log file there was also another bsod that was diffrent from these but i had to roolback windows so its gone but its was -page fault in nonpaged area i think the error code ended with 05 or something like that but i think its a ram problem...
BSOD Crashes and Debugging
Solved Multiple BSODs in Windows 10
Hi All, I just registered in hope you can help me with my problem. Yesterday I upgraded from Windows 7 to Windows 10. In windows 7 I used to get BSODs about once a week. The really weird thing is that it was related to whenever I rebooted my...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:08.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums