"IRQL not less or equal" BSOD after installing new bios and gpu driver

Hi HansW,

Could you provide me a link to the specs of your memory? I cannot find a proper site and I would like to check a few things.
Currently it looks like the memory is overclocked

Code:

[Memory Device (Type 17) - Length 40 - Handle 004ch]
  Physical Memory Array Handle  004ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM_A2
  Bank Locator                  BANK 1
  Memory Type                   1ah - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         2400MHz
  Manufacturer                  Patriot
  Serial Number                         
  Asset Tag Number                        
  Part Number                   PSD48G24002

Attachment 84215

Please check Logitech for driver updates
Driver Reference Table - lvuvc64.sys

Code:

fffff803`5ce61998  fffff800`072cf2b0Unable to load image \SystemRoot\system32\DRIVERS\lvuvc64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for lvuvc64.sys
*** ERROR: Module load completed but symbols could not be loaded for lvuvc64.sys
 lvuvc64+0x4f2b0

0: kd> lmvm lvuvc64
Browse full module list
start             end                 module name
fffff800`07280000 fffff800`07707d80   lvuvc64  T (no symbols)           
    Loaded symbol image file: lvuvc64.sys
    Image path: \SystemRoot\system32\DRIVERS\lvuvc64.sys
    Image name: lvuvc64.sys
    Browse all global symbols  functions  data
    Timestamp:        Tue Oct 23 04:12:08 2012 (5085FCF8)
    CheckSum:         004912C7
    ImageSize:        00487D80
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to install as less as possible software using custom/advanced options, you can use this tutorial to do so AMD Graphics Drivers - Install Without Catalyst Install Manager - Windows 7 Help Forums
Attachment 84216

Code:

+++ WER7 +++:
Fault bucket , type 0
Event Name: LiveKernelEvent
Response: Not available
Cab Id: 0

Problem signature:
P1: 141
P2: ffffe001721184c0
P3: fffff801909aebf8
P4: 0
P5: 177c
P6: 10_0_10586
P7: 0_0
P8: 768_1
P9: 
P10: 


+++ WER8 +++:
Fault bucket , type 0
Event Name: LiveKernelEvent
Response: Not available
Cab Id: 0

Problem signature:
P1: 117
P2: ffffe00171d264a0
P3: fffff801909aebf8
P4: 0
P5: 0
P6: 10_0_10586
P7: 0_0
P8: 768_1
P9: 
P10:

Hello, axe0

Sorry to bother you again. Thank you very much for your help!
"Could you provide me a link to the specs of your memory?"
I believe this is the memory I have. (I referred to the label on their case "PC4-19200, Patriot Signature Line".) But unfortunately, it doesn't show the default timings...

I will check logitech for driver updates now.

I will also use DDU to uninstall AMD drivers.
(Up until now I've been doing this everytime http://www.tomshardware.com/faq/id-2...u-drivers.html.)

After that I will use that tutorial you referred to.
(I always install everything but raptor and HDMI audio, but I won't this time. While referring to that tutorial I'll only install the bare minimum.)

I installed the driver for the C615 logitech webcam. (I never had it installed before.)

Used DDU to uninstall the amd driver in safe mode (had auto updates disabled beforehand).
I mistakenly installed some logitech gaming software for the mouse (went on a logitech driver update rampage). For some reason my mouse wouldn't work launching into safe mode.

Tried uninstalling that logitech gaming software (only software I could find for the mouse), but my mouse still wouldn't work in safemode, so I just used keyboard to navigate DDU.

Successfully uninstalled AMD drivers, and installed the GPU "drivers" only (I will use this cool, minimal install method (via unpacking the installer) from here on out).

I will check this thread once a day for a week (in case there's something I need to do about the memory). If no problems occur at all by next Saturday I will close it as solved.

Thank you very much for your time, axe0!
..

(I've never messed with any of the memory settings in the bios, ever. I don't even have the option to set XMP. Asus Bios just auto ups the speed.)

(I've never messed with any of the memory settings in the bios, ever. I don't even have the option to set XMP. Asus Bios just auto ups the speed.)

No problem, I would just like to know what it is set to :)

Please do not edit posts after a few hours, chances are that they won't be seen because nobody will be notified with changes but only with new replies.

Sorry forgot to add that, the frequency & voltage & the timings of the memory.

Here's everything except for the "Third Timings" and "RTL IOL Control". (There are about 30 settings in each of these. All of them were set to Auto, but most of them had specific CHA and CHB values.)

Primary Timings CHA CHB
DRAM CAS# Latency 16 16 Auto
DRAM RAS# to CAS# Delay 16 16 Auto
DRAM RAS# ACT Time 39 39 Auto
DRAM Command Rate Auto

Secondary Timings CHA CHB
DRAM RAS# to RAS# Delay L 6 6 Auto
DRAM RAS# to RAS# Delay S 4 4 Auto
DRAM REF Cycle Time 313 313 Auto
DRAM Refresh Interval 9364 9364 Auto
DRAM WRITE Recovery Time Auto
DRAM READ to PRE Time 9 9 Auto
DRAM FOUR ACT WIN Time 26 26 Auto
DRAM WRITE to READ Delay L Auto
DRAM WRITE to READ Delay S Auto
DRAM CKE Minimum Pulse Width 6 6 Auto
DRAM Write Latency 15 15 Auto
Skew Control (Every single setting set to Auto)
Misc.
MRC Fast Boot Auto
DRAM CLC Read Auto
Memory Scrambler Auto
Channel A DIMM Control Enable both DIMMS
Channel B DIMM Control Enable both DIMMS
MCH Fill Check Auto
DLL BwEn Auto
DRAM SPD Write Auto

You could make a photo/screenshot of it :)