Page 1 of 3 123 LastLast
  1.    08 Jun 2016 #1
    Join Date : Jun 2016
    Posts : 14
    win 10

    BSOD's too many to count!!


    Hi,
    this issue started when i installed a graphics card on windows seven and is probably driver related.
    originally i would regularly get "irql equal to or less" but that seemed to only happen on certain things like itv player and some games.
    i took out the graphics and deleted the graphics drivers to install the onboard drivers but still had the same issue.
    the last week i have had bsod on many things here are some of them:

    driver overran stack buffer
    system pte misuse
    memory management
    Edit : system service exception
    another one: k mode exception not handled (this was while on desktop not dong anything).

    some restarts say about an overclock failure other times it wont restart at all.

    any help would be great,
    thanks.
    Attachment 84122
    Last edited by sov; 08 Jun 2016 at 18:56.
      My ComputerSystem Spec
  2.    09 Jun 2016 #2
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Please remove all overclocking back to stock!

    Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs
    • CPU
    • Mainboard
    • Memory
    • SPD*
    • Graphics

    *SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
    Please make screenshots of each module.

    Please post each screenshot in your next reply/replies.




    BSOD's too many to count!! Diagnostic Test BSOD's too many to count!!
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.





    BSOD's too many to count!! Diagnostics Test BSOD's too many to count!!
     HDD TEST

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Post screenshots/photos of the test results

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Upload the chkdsk log Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the error scan,
    • the health,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.




    There are many crashes related to memory corruption and/or possible NTFS corruption, we'll need to rule out the memory and hard drive properly first
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 3B, {c0000005, fffff8002598a786, ffffd000ec9bc980, 0}
    
    Probably caused by : NTFS.sys ( NTFS!NtfsFsdCreate+16 )
    
    Followup:     MachineOwner
    
    
    1: kd> !devobj ffffe001bac62060
    Device object (ffffe001bac62060) is for:
     InfoMask field not found for _OBJECT_HEADER at ffffe001bac62030
     \FileSystem\Npfs DriverObject ffffe001bac38470
    Current Irp 00000000 RefCount 118 Type 00000011 Flags 00000240
    Dacl ffffc10221b6ce71 DevExt ffffe001bac621b0 DevObjExt ffffe001bac62380 
    ExtensionFlags (0x00000800)  DOE_DEFAULT_SD_PRESENT
    Characteristics (0x00020000)  FILE_DEVICE_ALLOW_APPCONTAINER_TRAVERSAL
    AttachedDevice (Upper) ffffe001bb7acdf0 \FileSystem\FltMgr
    Device queue is not busy.
    
    
    CHKIMG_EXTENSION: !chkimg -lo 50 -db !Npfs
    157 errors : !Npfs (fffff801120e3b2c-fffff801120e3c29)
    fffff801120e3b20  60  ab  00  00  8e  ae  00  00  e8  3a  00  00 *00 *00 *00  00 `........:......
    fffff801120e3b30 *00 *00  00 *00 *00 *00 *00  00 *00 *00 *00 *00 *00 *00 *00  00 ................
    fffff801120e3b40 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00  00  00 *00 *00 *00  00 ................
    fffff801120e3b50 *00 *00 *00  00 *00 *00 *00  00 *00 *00 *00  00 *00 *00 *00  00 ................
    fffff801120e3b60 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 *00  00 *00  00 ................
    fffff801120e3b70 *00 *00  00 *00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
    fffff801120e3b80 *00  00 *00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00 ................
    fffff801120e3b90  00 *00 *00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
    fffff801120e3ba0 *00  00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
    fffff801120e3bb0 *00  00 *00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00 ................
    fffff801120e3bc0  00 *00 *00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
    fffff801120e3bd0 *00 *00 *00  00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 ................
    fffff801120e3be0 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00  00  00 *00  00  00  00 ................
    fffff801120e3bf0 *00 *00  00  00 *00 *00  00  00 *00  00  00  00 *00 *00  00  00 ................
    fffff801120e3c00 *00  00  00  00 *00 *00  00  00 *00 *00  00  00 *00 *00  00  00 ................
    fffff801120e3c10 *00 *00 *00  00 *00 *00 *00  00 *00 *00 *00 *00 *00 *00 *00  00 ................
    fffff801120e3c20 *00 *00 *00  00 *00 *00  00  00 *00 *00  00  00  10  3c  00  00 .............<..
    
    
    MODULE_NAME: memory_corruption
    
    IMAGE_NAME:  memory_corruption
    
    FOLLOWUP_NAME:  memory_corruption
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    
    MEMORY_CORRUPTOR:  LARGE_256
    
    FAILURE_BUCKET_ID:  MEMORY_CORRUPTION_LARGE_256
    
    BUCKET_ID:  MEMORY_CORRUPTION_LARGE_256
    
    PRIMARY_PROBLEM_CLASS:  MEMORY_CORRUPTION_LARGE_256

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My ComputersSystem Spec
  3.    09 Jun 2016 #3
    Join Date : Jun 2016
    Posts : 14
    win 10
    Thread Starter

    Thanks Axe0 for the reply.

    Regarding the overclock, i have never had one installed so not sure why that message would have appeared.
    I will get on with the other tests and will hopefully have some results for you by tomorrow.
      My ComputerSystem Spec
  4.    09 Jun 2016 #4
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Could you please check the frequency of your CPU, GPU & RAM in the BIOS and post them here so it can be checked
      My ComputersSystem Spec
  5.    10 Jun 2016 #5
    Join Date : Jun 2016
    Posts : 14
    win 10
    Thread Starter
      My ComputerSystem Spec
  6.    10 Jun 2016 #6
    Join Date : Jun 2016
    Posts : 14
    win 10
    Thread Starter

    Seatools was fine on all tests:

    Attachment 84484
      My ComputerSystem Spec
  7.    10 Jun 2016 #7
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Please boot in the BIOS and make sure the optimal default settings are loaded.
      My ComputersSystem Spec
  8.    10 Jun 2016 #8
    Join Date : Jun 2016
    Posts : 14
    win 10
    Thread Starter
      My ComputerSystem Spec
  9.    10 Jun 2016 #9
    Join Date : Jun 2016
    Posts : 14
    win 10
    Thread Starter

    Quote Originally Posted by axe0 View Post
    Please boot in the BIOS and make sure the optimal default settings are loaded.
    Just seen this, will do. thanks.
      My ComputerSystem Spec
  10.    10 Jun 2016 #10
    Join Date : Jun 2016
    Posts : 14
    win 10
    Thread Starter

    i had a look at the bios but now not sure what you mean. ive got the option of F5-setup defaults ? (i clicked it but not sure if it changed anything).
    i could post screenshots and see if you think i should change any of the options? im not sure what should be enabled/disabled.
      My ComputerSystem Spec

 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
Mail App email count
Is there a way to see an email count in the mail app? For example, when I'm in my inbox, how can I tell the total number of email in the inbox. I've just switched from Windows Live Mail (which is being depreciated) which had a count on the bottom...
Browsers and Email
Profile page visitor count
lol my visitor count is about to pass 10,000 visits. I must be popular!
Chillout Room
Post count leaders
Well I'm surprised no one has done this already if I missed it sorry :p We'll have to start now, Leader seems to be HippsieGypsie upsetting a long time winner A.Guy wow :) 5823 You've earned the coveted PostWhore or Post'n Nut badges wear them...
Chillout Room
10 Forums Members count snip
7730 Not bad numbers 10 10 for the first month of the leak. I am sure it will continue to grow!:party: Charlie
Chillout Room
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:30.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums