Windows 10: Windows 10 Page_Fault_In_NonPage_Area FLTMGR.SYS Solved

Page 3 of 4 FirstFirst 1234 LastLast

  1. Posts : 22
    Windows 10 Pro 64-bit
    Thread Starter
       06 Jun 2016 #21

    How can I return to windows 7? The windows.old is deleted... I need my files so I can not format!
      My ComputerSystem Spec

  2. Posts : 13,354
    Windows 10 Pro
       06 Jun 2016 #22

    Without the Windows.Old folder you cannot go back while keeping your files intact + with no extra problems, except if you have made a system backup/image of the system prior installing Windows 10. The best way to revert back is by using installation media & delete all partitions so you perform a clean install that doesn't cause problems.

    But my computer is running with different RAM sticks 4 years!
    Time is not relevant, the only thing that is relevant is that mixed memory can cause problems, either immediately or in a matter of time.

    I recommend that you cleanup all your partitions to increase the free space to at least 15% on EACH partition, not enough free space can annoy the user about Windows background stuff and can cause BSODs too (it happens rarely though).
      My ComputersSystem Spec

  3. Posts : 22
    Windows 10 Pro 64-bit
    Thread Starter
       07 Jun 2016 #23

    Is possible for the crass to be due to a confict? I was getting the BSOD about 5 or 6 times per day! After uninstalling MSE I am getting the BSOD 1 or maybe 2 times per day... Is it possible that I still have some windows 7 files that sould have been deleted with the update?
      My ComputerSystem Spec

  4. Posts : 13,354
    Windows 10 Pro
       07 Jun 2016 #24

    Many BSODs lately are caused by driver conflicts with Malwarebytes & Bitdefender.

    When you do the upgrade there will be leftovers from the previous OS, you should be able to get rid of them by deleting the Windows.Old folder.
      My ComputersSystem Spec

  5. Posts : 22
    Windows 10 Pro 64-bit
    Thread Starter
       07 Jun 2016 #25

    Windows.old is deleted using Disk Cleanup, but I still get the BSOD... I used my RAM sticks to another computer and they were working without any problem... So I am sure to say that it is not a hardware problem!
      My ComputerSystem Spec

  6. Posts : 22
    Windows 10 Pro 64-bit
    Thread Starter
       07 Jun 2016 #26

    What about this? Both dmp files were created from a BSOD with the same problem PAGE_FAULT_IN_NONPAGES_AREA(Fltmgr.sys) BUT they have some differences... What do you think?
      My ComputerSystem Spec

  7. Posts : 13,354
    Windows 10 Pro
       07 Jun 2016 #27

    What we think is not important, what is important is that you use only 1 memory model and make at the same time, if it is faulty or not or that you've used it for a long time is not relevant!

    Windows 10 Page_Fault_In_NonPage_Area FLTMGR.SYS Diagnostics Test Windows 10 Page_Fault_In_NonPage_Area FLTMGR.SYS

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Post screenshots/photos of the test results

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Upload the chkdsk log Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the error scan,
    • the health,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.
      My ComputersSystem Spec

  • Posts : 22
    Windows 10 Pro 64-bit
    Thread Starter
       08 Jun 2016 #28

    BEFORE doing more tests, when I am opening my computer it asks me from where I want to boot but I have only one operating system in my computer so the only option is the Windows 10 from my knowledge I should not get this screen before booting. Also, I have a driver in the E: Hard Disc that might be a bit outdated its the arduino's one, I am not sure if they have released a Windows 10 driver... In addition, I tried to Auto-Repair the Windows, and it saved a log in another Hard Disc the H: in a new Windows folder which does not exist. Any idea?
      My ComputerSystem Spec

  • Posts : 13,354
    Windows 10 Pro
       08 Jun 2016 #29

    The focus is solving BSODs, anything else should be done later.

    For the boot question, checked the boot order in the BIOS?

    Did you increase the free space on your partitions?
      My ComputersSystem Spec

  • Posts : 22
    Windows 10 Pro 64-bit
    Thread Starter
       08 Jun 2016 #30

    First boot is cd/dvd as usually, I am asking because this might show that windows 7 were not unistalled successfully. I thought that there might be some functional files from windows 7 that cause confict with the windows 10 files. I have my computer 2 days open and is never crashed if it was a hardware problem, RAM, HDD. CPU etc. it should have "died"... I am willing to hear your opinion, I might be wrong...
      My ComputerSystem Spec

    Page 3 of 4 FirstFirst 1234 LastLast

    Related Threads
    Bsod page_fault_in_nonpaged_area (fltmgr.sys) in BSOD Crashes and Debugging
    Any help would be appreciate.32983
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 12:11.
    Find Us