1.    25 May 2016 #1
    Join Date : Jul 2015
    Posts : 3
    Windows 8.1

    Different BSODs on Custom Build


    Hi guys,

    I've been intermittently having this problem, usually occurring when I'm playing a video game. I get the machine check exception as well as driver_irql_not_less_or_equal. The machine check exception happens more often though. My specs are:
    i5-6600k (I brought it down to base freq to see if it would help; it did not)
    Asrock z170 pro4
    Radeon R9 380x
    Corsair Vengeance LPX ddr4 2400 ram
    Seagate Barraccudda 1tb
    Kingston x70nr for windows
    EVGA Supernova 550 G2 80+
    I've updated all drivers but the issue persists. The issues were gone for a small amount of time when I clean installed windows but they have returned again.
    Attachment 81625

    Thank you!
      My ComputerSystem Spec
  2.    27 May 2016 #2
    Join Date : Jun 2015
    Posts : 12,958
    Windows 10 Pro

    Hi kinguin,

    Welcome to the 10forums

    A 0x9C is similar to a 0x124 which is basically a hardware error and as such I would like to start with hardware troubleshooting.
    Please follow below suggestions carefully.




    Different BSODs on Custom Build STOP 0x124 Troubleshooting Different BSODs on Custom Build
    Read carefully before proceeding.


    warning   Warning
    If you're overclocking your system, revert back to stock clocks now.

    Note   Note
    Test the system once the overclock is removed before continuing with the steps outlined below.


    Part One: CPU Stress Test
    Part Two: MemTest86+ RAM Diagnostic
    Part Three: Hard Drive Diagnostics
    Part Four: GPU Stress Test




    Different BSODs on Custom Build ONE Different BSODs on Custom Build
     CPU TEST

    Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

    Make a photo of the result and post it.




    Different BSODs on Custom Build TWO Different BSODs on Custom Build
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it please.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.




    Different BSODs on Custom Build THREE Different BSODs on Custom Build
     HDD TEST

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.

    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Post screenshots/photos of the test results

    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the error scan,
    • the health,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.





    Different BSODs on Custom Build FOUR Different BSODs on Custom Build
     GPU TEST

    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    Note   Note
    Run Furmark for around 30 minutes.

    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

    Make a photo of the result and post it.
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
BSOD on custom build
Hello, Ever since yesterday in mid afternoon, my computer will not load Resolume despite it working most of the day prior. Each time I run the program, it shuts down before it can even open fully. The system says that an error has occurred and...
BSOD Crashes and Debugging
Custom built computer gets lots of BSODs on startup
74081 Hi there! So about half a year ago, my dad decided to give me the money to build my own PC. So I bought all the parts and my dad and his friend put it together for me (I'm terrible with handling hardware). It works great! It runs games...
BSOD Crashes and Debugging
Solved New Custom Build - BSOD within Games
Hi all, around a month ago I build a new PC for Gaming purpose. This is the hardware I chose: Fractal Design Define S Corsair CP-9020056-EU RM850 Asus Z170 Pro Gaming Intel Core i7-6700K Prozessor be quiet! BK019 Dark Rock Pro 3 CPU-Kühler
BSOD Crashes and Debugging
Semi custom build died
So after 4 years my build keeled over. I bought a HP 4-5 years ago while in college for school work. Came with a dual core athlon, 4 gb ram, and onboard graphics. About a year after, upgraded the CPU to a phenom II x4 850 quad. Added SSD as boot...
PC Custom Builds and Overclocking
Custom build win 10
Hi, I am interested in an application that can create custom builds of windows 10 in a similar way that RT7Lite does for windows 7, the only application I've found so far isn't really as advanced or as customisable as RT7Lite was... I was...
PC Custom Builds and Overclocking
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:56.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums