Page 2 of 3 FirstFirst 123 LastLast
  1.    01 Jun 2016 #11
    Join Date : May 2016
    Posts : 12
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter

    Oh sorry forgot to answer the troubleshooting question.

    +the things you mentioned earlier to remove the bsods.

    Replaced the ram, reinstalled windows, and aircleaned the system to remove dust and lower temps.

    Why I think I need to replace the MB is basicly just beeing tired of the errors and I know no nother options.
      My ComputerSystem Spec
  2.    01 Jun 2016 #12
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    BSODs have varies of causes, replacing the mobo is most of the times not a solution that helps and is a very last resort which normally only applies when everything else is ruled out.

    Here are 'a few' questions:
    • Have you tried to reseat the GPU or seat it into a different slot?
    • Have you tried different cabling and/or reconnecting the cables?
    • Have you checked the 3.3v, 5v and 12v values in the BIOS?
    • Have you done stress tests for the GPU and CPU?
    • Have you ran tests for the HDD/SSD?
    • Have you tried to reset the BIOS settings by loading the optimal default settings?
    • Is there anything overclocked? If there is has the system been tested without any overclocking present?
    • Is the PSU tested?
    • Have you taken a look at the connections of the drives & cabling for any damage?
    • Have you taken a look at the slots to see if there is any damage?
    • Have you checked if the CPU is physically damaged?
    • Are all cables properly connected?
      My ComputersSystem Spec
  3.    01 Jun 2016 #13
    Join Date : May 2016
    Posts : 12
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter

    • Have you tried to reseat the GPU or seat it into a different slot? No, but will do, but if this is an issue the MB would be bad.
    • Have you tried different cabling and/or reconnecting the cables? Changed from stock to corsairs individually sleeved, no difference.
    • Have you checked the 3.3v, 5v and 12v values in the BIOS? +12.000V, +5,040V and +3.296V
    • Have you done stress tests for the GPU and CPU? - Yes. no problems during the test.
    • Have you ran tests for the HDD/SSD? Yes
    • Have you tried to reset the BIOS settings by loading the optimal default settings? Tried reloading settings and loading standard OC settings.
    • Is there anything overclocked? If there is has the system been tested without any overclocking present? Kept it without an overclock due to unstability.
    • Is the PSU tested? No
    • Have you taken a look at the connections of the drives & cabling for any damage? Everything looks good.
    • Have you taken a look at the slots to see if there is any damage? RAM/PCIE looks ok
    • Have you checked if the CPU is physically damaged? no.
    • Are all cables properly connected? Yes
      My ComputerSystem Spec
  4.    02 Jun 2016 #14
    Join Date : May 2016
    Posts : 12
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter

    So now I've moved the GPU to another slot aswell.
    Don't have any thermal paste so i cant remove the cpu untill after the weekend is over.

    But had 3 restarts today, 2 while playing overwatch and 1 while just browsing online.
      My ComputerSystem Spec
  5.    02 Jun 2016 #15
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Could you test the PSU?
      My ComputersSystem Spec
  6.    02 Jun 2016 #16
    Join Date : May 2016
    Posts : 12
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter

    In what way?
      My ComputerSystem Spec
  7.    02 Jun 2016 #17
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    I'm sorry, I forgot to post a tutorial for it
    PSU - Test DC Output Voltage - Windows 7 Help Forums
      My ComputersSystem Spec
  8.    02 Jun 2016 #18
    Join Date : May 2016
    Posts : 12
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter

    So basicly just make sure that all voltages are ok, not just the 3.3 , 12 and 5v?
    Yeah I can do that on sunday and post an update.
      My ComputerSystem Spec
  9.    02 Jun 2016 #19
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    That is basically correct
      My ComputersSystem Spec
  10.    07 Jun 2016 #20
    Join Date : May 2016
    Posts : 12
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
    Thread Starter

    The white wire had 3.4V not 0v as stated by the website, but other sources tell me that the white wire is optional and not used in newer systems.

    System is restarting more frequently than earlier. Doesn't matter what I am doing.
      My ComputerSystem Spec

 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
That's it, giving up on Windows 10.
Have two identical Surface Pro tablets in front of me. One on Win8 and one on Win10. Win10 version has issues playing flash videos in Firefox. Videos are just a black screen. This happens on a fresh profile, and after a Win10 reset this pc. ...
General Support
Giving up on Windows 10 - help to revert to 8
Hi everyone, I have tried everything to get Windows 10 running this week on my relatively new laptop. I did a format and clean install and it always works well - it runs fast and looks stable - until the first reboot where it hangs at...
Installation and Upgrade
Holo HoloLens is a five year journey, first version out within a year
Read more: HoloLens is a five year journey, first version out within a year
Windows 10 News
Is Microsoft going crazy, giving Ten for free!
Chillout Room
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:27.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums