Page 4 of 5 FirstFirst ... 2345 LastLast

  1. Joined : May 2016
    Posts : 23
    Windows 10
       25 May 2016 #31

    Almost 100% sure it isn't installing properly to the flash drives, I just tried it on my laptop and it doesn't work either.
      My System SpecsSystem Spec


  2. Joined : May 2016
    Posts : 23
    Windows 10
       25 May 2016 #32

    I also have 3 more bluescreen dumps if you need them.
      My System SpecsSystem Spec


  3. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       25 May 2016 #33

    Yes, but preferred through a zip from the DM tool.
    Could you also give some description about what happened when the crashes occured.

    I would like to test the memory, but with another method > replacing with another kit.
      My System SpecsSystem Spec


  4. Joined : May 2016
    Posts : 23
    Windows 10
       25 May 2016 #34

    I don't have a spare kit, is there another way to put memtest86+ on a USB drive
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       25 May 2016 #35

    The only way is through the installation of MemTest86+, you could also use a CD to do it but a USB is usually recommended as that is easier.

    I just ran MemTest86+ on my laptop with 0 problems, I did edit a few settings to see what changed hence the reason why there are 103 passes in less than 10 minutes.
    Attachment 81599
      My System SpecsSystem Spec


  6. Joined : May 2016
    Posts : 23
    Windows 10
       25 May 2016 #36

    Here are the new logs Attachment 81623, so I'm just supposed to run the memtest86+ installer and use the usb drive path? Or am I doing it wrong?
      My System SpecsSystem Spec


  7. Joined : May 2016
    Posts : 23
    Windows 10
       25 May 2016 #37

    So I took out the 2 newest dimms and it seems to have increased stability tremendously, I'll check the ram slots if i don't get any blue screens in the next few days.
      My System SpecsSystem Spec


  8. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       26 May 2016 #38

    Be sure that you upload a new zip please, the zip you attached is 3-4 days old & the same that has been uploaded a few days ago.

    According to the last dump, from 22th, your memory runs at 1600MHz which according to the specs of your memory is overclocking.
    Overclocking can cause problems, either immediately or in a matter of time, please revert all overclocking back to stock while troubleshooting.
    Code:
    [Memory Device (Type 17) - Length 34 - Handle 0043h]
      Physical Memory Array Handle  0042h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          4096MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelA-DIMM0
      Bank Locator                  BANK 0
      Memory Type                   18h - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  0420
      Serial Number                         
      Asset Tag Number                        
      Part Number                   F3-12800CL9-4GBXL
      My System SpecsSystem Spec


  9. Joined : May 2016
    Posts : 23
    Windows 10
       26 May 2016 #39


    My ram is running at stock speed, but anyways here is the new dumps (Attachment 81714).
      My System SpecsSystem Spec


  10. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       26 May 2016 #40

    All of them are caused by memory corruption, though 1 of them is blaming a Windows network driver but it is because of a memory access violation which can occur with memory corruption, none of the dumps blame a specific driver not from Windows.
      My System SpecsSystem Spec


 
Page 4 of 5 FirstFirst ... 2345 LastLast


Similar Threads
Thread Forum
Solved BSOD Memory_Management
Good evening, I've build a new PC with following hardware: i5 6500 AMD R9 380x (PowerColor) AsRock H170 Pro4 Gskill 16 GB Kit F4-240015D Thermaltake 530 W
BSOD Crashes and Debugging
Solved Memory_management bsod
First BSOD after a while of running fine. This is a new build PC with a clean install of Windows 10. It crashed a lot after installation, then settled down. Today, I'm running a download installer for 9.5GBytes of graphics applications and data....
BSOD Crashes and Debugging
Lenovo Y50-70: recurring MEMORY_MANAGEMENT BSOD
Hello everyone! :) Iíve been experiencing daily recurring BSOD for quite some time now and no matter what Iíve tried in order to resolve the issue, Iíve not been able to track down the root cause of the problem. Those BSOD are almost always due to...
BSOD Crashes and Debugging
BSOD Memory_Management Issue (ntoskrnl.exe?)
Background: I did a fresh install of Windows 10 on a newly formatted ssd about 3 weeks ago. Everything seemed to run fine until about a week ago when I first got this BSOD. Over the past few days I have been getting it basically every day. I...
BSOD Crashes and Debugging
Solved Driver_power_state_failure and memory_management BSOD
I got a new laptop and after about a week I started to get the BSOD driver_power_state_failure. Sometimes it wouldn't happen for days and sometimes I'd get it 2-3 times a day. I ran whocrashed and the program said it was caused by the ntoskrnl.exe...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:39.
Find Us
Twitter Facebook Google+



Windows 10 Forums