Page 3 of 5 FirstFirst 12345 LastLast
  1.    25 May 2016 #21
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Check if fast startup is disabled, in many cases (if not all) it needs to be disabled.
    Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums

    Then you may also need to change a setting in the BIOS in 'BIOS Features' > 'Windows 8', I'm not sure which one but if it is necessary and disabling fast startup isn't enough then the boot mode needs to be changed to legacy.
      My ComputersSystem Spec
  2.    25 May 2016 #22
    Join Date : May 2016
    Posts : 23
    Windows 10
    Thread Starter

    I tried those and even tried just completely resetting the CMOS with only the flash drive plugged in.
      My ComputerSystem Spec
  3.    25 May 2016 #23
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    What are the settings in 'BIOS Features' set to?
      My ComputersSystem Spec
  4.    25 May 2016 #24
    Join Date : May 2016
    Posts : 23
    Windows 10
    Thread Starter

    Here is all of the settings, Tre boot order is wrong. I use boot override to boot from USB usually. Imgur: The most awesome images on the Internet
      My ComputerSystem Spec
  5.    25 May 2016 #25
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    Do you have another USB that is bootable on which you can put MemTest86+ on?
      My ComputersSystem Spec
  6.    25 May 2016 #26
    Join Date : May 2016
    Posts : 23
    Windows 10
    Thread Starter

    I tired another USB and still got:
    "Missing operating system.
    BOOTMGR is missing
    Press Ctrl+Alt+Del to Restart
    _"
      My ComputerSystem Spec
  7.    25 May 2016 #27
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    That is odd, I've never seen that problem before.

    What is your boot order?
      My ComputersSystem Spec
  8.    25 May 2016 #28
    Join Date : May 2016
    Posts : 23
    Windows 10
    Thread Starter

    The boot order shouldn't matter, using boot override should only boot from the device I select. But as I said earlier I disconnected every drive except for usb to test it.
      My ComputerSystem Spec
  9.    25 May 2016 #29
    Join Date : May 2016
    Posts : 23
    Windows 10
    Thread Starter

    I don't think the installer is working properly, is there a better alternative to make bootable usb media?
      My ComputerSystem Spec
  10.    25 May 2016 #30
    Join Date : Jun 2015
    Posts : 12,968
    Windows 10 Pro

    The boot order indeed doesn't matter in the BIOS (unless a user has edited the boot order what sometimes happens) it was just a question out of curiosity to see if a problem was present in there

    Boot override shouldn't be necessary, the maximum that one would have to do is choosing the USB device from the boot options.
      My ComputersSystem Spec

 
Page 3 of 5 FirstFirst 12345 LastLast


Similar Threads
Thread Forum
Solved BSOD Memory_Management
Good evening, I've build a new PC with following hardware: i5 6500 AMD R9 380x (PowerColor) AsRock H170 Pro4 Gskill 16 GB Kit F4-240015D Thermaltake 530 W
BSOD Crashes and Debugging
Solved Memory_management bsod
First BSOD after a while of running fine. This is a new build PC with a clean install of Windows 10. It crashed a lot after installation, then settled down. Today, I'm running a download installer for 9.5GBytes of graphics applications and data....
BSOD Crashes and Debugging
Lenovo Y50-70: recurring MEMORY_MANAGEMENT BSOD
Hello everyone! :) Iíve been experiencing daily recurring BSOD for quite some time now and no matter what Iíve tried in order to resolve the issue, Iíve not been able to track down the root cause of the problem. Those BSOD are almost always due to...
BSOD Crashes and Debugging
BSOD Memory_Management Issue (ntoskrnl.exe?)
Background: I did a fresh install of Windows 10 on a newly formatted ssd about 3 weeks ago. Everything seemed to run fine until about a week ago when I first got this BSOD. Over the past few days I have been getting it basically every day. I...
BSOD Crashes and Debugging
Solved Driver_power_state_failure and memory_management BSOD
I got a new laptop and after about a week I started to get the BSOD driver_power_state_failure. Sometimes it wouldn't happen for days and sometimes I'd get it 2-3 times a day. I ran whocrashed and the program said it was caused by the ntoskrnl.exe...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:20.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums