Windows 10: Frequent BSODs with different causes

  1.    15 May 2016 #1

    Frequent BSODs with different causes


    https://i.imgur.com/AO6BgPk.png Picture with general error names

    Attachment 79858
      My ComputerSystem Spec


  2. Posts : 11,485
    Windows 10 Pro
       15 May 2016 #2

    Hi berkuhlee,

    Please cleanup your partitions to free up at least 15% space on each partition, this is important to do as Windows needs it to perform background stuff without annoying the user.

    Please make sure the firmware of your Sandisk SSD is up to date.

    Please remove / disable items from the startup in taskmanager
    These programs could interfere with the boot process giving you trouble and increase the boot time.

    warning   Warning
    Programs that claim to update your drivers install either the wrong or corrupted drivers.
    If you have installed any driver with Driver Genius Professional Edition, DriverTalent, DriverDoc or Driver Toolkit, please remove them as it may cause trouble.

    The recommended action to get rid of the changes is by using a restore point prior the use of these programs.

    You had several crashes, but there are zero dumps present in the upload.
    If you have cleaned up your system in any way possible, stop doing so as it removes the dumps which have a high priority to have in analyzing.
    If you have not, go to %systemroot%\minidump, right click all dumps > send to > compressed (zipped) folder and upload the created zip file.




    Frequent BSODs with different causes Diagnostics Test Frequent BSODs with different causes
     System File Check

    Please try following:
    • Open an admin command prompt
    • Copy/paste "sfc/scannow" (without quotes) and press enter
    • When it finished reboot your system
    • Open again an admin command prompt
    • Enter sfc/scannow again

    If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at %systemroot%\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
    System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

    Make a photo of the result and post it.





    Frequent BSODs with different causes Diagnostic Test Frequent BSODs with different causes
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My ComputersSystem Spec

  3.    15 May 2016 #3

    Attachment 79870 here are my minidumps
      My ComputerSystem Spec


  4. Posts : 11,485
    Windows 10 Pro
       15 May 2016 #4

    Please update or remove Netlimiter 4, it is causing many BSODs and is probably also the reason why the network drivers are being flagged more.
    Code:
    fffff803`0c6f6298  fffff800`05584e44Unable to load image nldrv.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nldrv.sys
    *** ERROR: Module load completed but symbols could not be loaded for nldrv.sys
     nldrv+0x4e44
      My ComputersSystem Spec

  5.    15 May 2016 #5

    Thanks! This might be the problem. Also I ran memtest overnight, it passed 4 times on 16gb of ram over 8 hours. Does it take longer with more ram?
      My ComputerSystem Spec


  6. Posts : 11,485
    Windows 10 Pro
       15 May 2016 #6

    16GB takes average about 16-20h to complete 8 passes straight, though some have trouble and run 3-4 days MemTest86+ to test 8GB while 8GB should take about 8-10h. Why it sometimes takes extremely long I can't explain.

    I've had another look at your dumps to look at the memory because you say you're running mixed memory in your system specs.
    It is not recommended to run mixed memory makes/models in a system, this can cause various of problems. I strongly advice to take out either of the models and use only 1 model at a time in a system.
    Code:
    [Memory Device (Type 17) - Length 40 - Handle 0042h]
      Physical Memory Array Handle  0041h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          4096MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelA-DIMM0
      Bank Locator                  BANK 0
      Memory Type                   18h - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  0420
      Serial Number                         
      Asset Tag Number                        
      Part Number                   F3-12800CL9-4GBXL 
    [Memory Device (Type 17) - Length 40 - Handle 0044h]
      Physical Memory Array Handle  0041h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          4096MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelA-DIMM1
      Bank Locator                  BANK 1
      Memory Type                   18h - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  1302
      Serial Number                         
      Asset Tag Number                        
      Part Number                   1600 CL9 Series 
    [Memory Device (Type 17) - Length 40 - Handle 0046h]
      Physical Memory Array Handle  0041h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          4096MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelB-DIMM0
      Bank Locator                  BANK 2
      Memory Type                   18h - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  0420
      Serial Number                         
      Asset Tag Number                        
      Part Number                   F3-12800CL9-4GBXL
    [Memory Device (Type 17) - Length 40 - Handle 0048h]
      Physical Memory Array Handle  0041h
      Memory Error Info Handle      [Not Provided]
      Total Width                   64 bits
      Data Width                    64 bits
      Size                          4096MB
      Form Factor                   09h - DIMM
      Device Set                    [None]
      Device Locator                ChannelB-DIMM1
      Bank Locator                  BANK 3
      Memory Type                   18h - Specification Reserved
      Type Detail                   0080h - Synchronous
      Speed                         1600MHz
      Manufacturer                  1302
      Serial Number                         
      Asset Tag Number                        
      Part Number                   1600 CL9 Series
      My ComputersSystem Spec

  7.    18 May 2016 #7

    Is there any way to run safely with 16gb of mixed ram? All my sticks are functional but when I mix them (slotted as 1+3, 2+4) my pc will start to bluescreen occasionally again.

    RAM models below:
    G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory (F3-12800CL9D-8GBXL) - PCPartPicker

    Patriot Viper 3 8GB (2 x 4GB) DDR3-1600 Memory (PV38G160C9K) - PCPartPicker
      My ComputerSystem Spec


  8. Posts : 11,485
    Windows 10 Pro
       18 May 2016 #8

    There is no way someone can run mixed RAM safely the entire time during the lifetime of either the system or the memory.
    Though there may be others who do nothing else then use mixed RAM, but I strongly recommend against it, I've seen it multiple times being the cause of BSODs where an analyst would ask himself what the relation with the BSODs is.
      My ComputersSystem Spec


 

Related Threads
Frequent BSODs with my new Laptop in BSOD Crashes and Debugging
getting frequent BSODs showing error IRQL_NOT_LESS_OR_EQUAL_TO whenever I turn on my computer from sleep. I believe the main cause of the BSOD was the ntoskrnl.exe+14d2e9 file also getting sudden interruptions by the OSOD showing error...
Hello all. Since around the middle of October, I have suddenly been receiving BSODs, mostly DPC_WATCHDOG_VIOLATION, MEMORY_MANAGEMENT, or IRQ_NOT_LESS_OR_EQUAL. I have collected the necessary files and will upload them, with one caveat - I cleaned...
Frequent BSODs - L1C63x64.sys in BSOD Crashes and Debugging
Since upgrading to Windows 10 I am getting frequent BSODs with DRIVER_IRQL_NOT_LESS_OR_EQUAL in L1C634x64.sys especially when the network is loaded (heavy bit torrent activity) Googling has led me to believe that it is problems lies with my...
Hello! I have been trying to debug this myself for a while, and I'm rather at my wit's end here. I've been experiencing very frequent BSODs every time the computer comes under any sort of load, however it may take a while for them to start...
Solved Frequent BSODs + Abnormal memory usage in BSOD Crashes and Debugging
My computer has been acting weird for the past 2 months. I think it started after I installed a driver for an xbox one controller, but I am not sure if I am remembering correctly. Anyway, when I use my computer for prolonged periods of time, the...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:34.
Find Us