Windows 10: Random BSODs usbohci.sys

Page 2 of 2 FirstFirst 12
  1. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       20 May 2016 #11

    Everything looks very nice there.

    I would like to ask for one more thing, just as a confirmation that the RAM is not playing any role in the issue.
    Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
    Take a camera snap of the memtest86+ window before closing the program. Let us see it.
    Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

    Depending on the result of the RAM test and the last BSODs you uploaded, we will decide our next step.
      My ComputerSystem Spec

  2. Posts : 9
    Windows 10 x64 Home
    Thread Starter
       21 May 2016 #12

    So I am running it right now but it froze after 51 minutes. CPU is at 79 degrees Celsius. I'm on my phone right now
      My ComputerSystem Spec

  3. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       22 May 2016 #13

    memtest86+ froze?

    Please let it have another go?
    Because that is not a good indication.

    EDIT: In the second attempt, if the test asks for pressing any key for multi-core processor, dont press any key and let the test run.
    Last edited by Arc; 22 May 2016 at 01:42.
      My ComputerSystem Spec

  4. essenbe's Avatar
    Posts : 11,342
    Windows 10 Pro and Windows 10 Pro Insider
       22 May 2016 #14

    Hello EternalMuffin. That same thing happened to me while running version 5.01. It asks to press a button for multi core CPUs, I did and it froze. I ran it again without pressing anything and it started itself in a couple of seconds and ran with no problem. Is it normal for your CPU to reach that temp?
      My ComputersSystem Spec

  5. Posts : 9
    Windows 10 x64 Home
    Thread Starter
       22 May 2016 #15

    My CPU only reaches that temp when I'm playing a CPU intense game. Like when playing Ultra HD games

    EDIT: When I first ran memtest I didn't press anything, the second time I did SMP and it worked fine. Here is a picture of the second memtest:
    Last edited by EternalMuffin; 22 May 2016 at 09:46.
      My ComputerSystem Spec

  6. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       22 May 2016 #16

    A revealing news that the RAM is not failing.

    Now, it is usbohci that is failing.
    BugCheck D1, {28, 2, 1, fffff80137e2206e}
    Probably caused by : usbohci.sys ( usbohci!OHCI_PollIsoEndpoint+d2 )
    Followup:     MachineOwner
    The OHCI device is SB700 OHCI2, a component of AMD chipset. But there is no chipset deiver listed for download: GIGABYTE - Motherboard - Socket AM3+ - GA-970A-DS3P (rev. 1.0)
    . The BIOS is the latest; too.

    In this situation, I think it would be better to perform a clean install. Dont install any driver there other than the graphics driver, let windows update all the other drivers.

    See how it goes. Let us know.
      My ComputerSystem Spec

  7. Posts : 9
    Windows 10 x64 Home
    Thread Starter
       22 May 2016 #17

    Okay, I have reset the computer. While it was resetting it crashed and then it wouldn't reinstall windows, so I had to put windows 10 on a USB and boot it from that. Right now windows is updating everything, even the graphics driver.

    EDIT: It crashed, "IRQL_Not_Less_or_Equal"
    Last edited by EternalMuffin; 22 May 2016 at 18:58. Reason: CRASH
      My ComputerSystem Spec

  8. Arc's Avatar
    Posts : 1,643
    Microsoft Windows 10 Home
       22 May 2016 #18

    Actually there were two BSODs as the reports say. The first one is 0x1A and the second one is 0xA. But you are reporting for only one BSOD; and there is only one dump in the zip.

    The dump says ....
    BugCheck A, {bf7c4008, 2, 0, fffff802c1c24682}
    Probably caused by : PCIIDEX.SYS ( PCIIDEX!BmFlush+2c )
    Followup:     MachineOwner
    00 fffff802`c352b258 fffff802`c1ddf2e9 nt!KeBugCheckEx
    01 fffff802`c352b260 fffff802`c1dddac7 nt!KiBugCheckDispatch+0x69
    02 fffff802`c352b3a0 fffff802`c1c24682 nt!KiPageFault+0x247
    03 fffff802`c352b530 fffff802`c1c23dc4 hal!HalpDmaFreeMapRegisters+0x1a
    04 fffff802`c352b560 fffff802`c1c3a6ac hal!IoFreeMapRegistersV2+0x60
    05 fffff802`c352b5a0 fffff800`b79911bc hal!HalPutScatterGatherList+0x18b6c
    06 fffff802`c352b600 fffff800`b7afcf3f PCIIDEX!BmFlush+0x2c
    07 fffff802`c352b630 fffff800`b7afcbbf ataport!IdeProcessCompletedRequests+0x14b
    08 fffff802`c352b7f0 fffff802`c1ce0b60 ataport!IdePortCompletionDpc+0x18f
    09 fffff802`c352b8c0 fffff802`c1ce0279 nt!KiExecuteAllDpcs+0x270
    0a fffff802`c352ba10 fffff802`c1dd753a nt!KiRetireDpcList+0xe9
    0b fffff802`c352bc60 00000000`00000000 nt!KiIdleLoop+0x5a
    The failing module is the IDE mode storage controller driver. IDE mode is almost castoff nowadays. But what does this mean?

    It may mean any of the following:
    1. A disk environment related issue. Either the SATA port is failing or the HDD itself.
    2. A bad sort of malware/rootkit. Did you format all the system partitions of the HDD (EFI, Recovery and C) before performing the clean install? If not, a malware infection from the previous installation will nicely be carried forward. The malware that makes ataport fail resides in the hidden system partitions, not in C.
    3. A failing motherboard. If there is no adequate cause of a BSOD with a system native driver flagged as failing, even just after a clean install, then the notion goes on it. But that is a notion, as we cannot test a motherboard.

    What should do now .....

    Check the disk environment .....
    Reseat the SATA and power.

    • You also may want to apply the SATA cable to an unused port on the motherboard; and better you apply a new SATA cable.

    Test the HDD: SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Check for some malware. Dont depend on your resident antivirus for that. Scan the system for possible virus infection with the following programs.

    Let us know the situation upto these steps.
      My ComputerSystem Spec

Page 2 of 2 FirstFirst 12

Related Threads
Random BSODs on new PC in BSOD Crashes and Debugging
Hi, i'm getting random BSOD erros, on a new computer. I already ran the memtest 86, no erros, and i can't seem to solve the problem. Here is the dump files...
Solved Random BSODs in BSOD Crashes and Debugging
Hello, I'm having trouble with my new PC I assembled few days ago. In many situations I had BSODs while playing, browsing net or even in idle. As IT guy I can't even think of it, because all of STOP codes are different! My RAM is ok, disk also,...
Random BSODs in BSOD Crashes and Debugging
We recently upgraded this machine from Windows 7 to Windows 10. Now every once in awhile we will get a seemingly random blue screen. I believe it is either bad memory or a driver, but can use a little help to figure out which it is. Thank you,...
Random BSODs in BSOD Crashes and Debugging
Hi hope u guys can help me. would be very thankful :) Got a new system 1-2 Months old. Fresh installed Windows 10 Pro Build 1511. But I am getting Bluescreens (not sure what the cause is) random. For example once I plugged in an USB-Stick I got...
Random bsods in BSOD Crashes and Debugging
Recently i started having random bsods...tried reseting windows and deleting and reinstalling video drivers and still nothing...i attached minidump files...pls help
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:15.
Find Us