Page 1 of 2 12 LastLast
  1.    10 May 2016 #1
    Join Date : May 2016
    Posts : 6
    Windows 10

    BSOD Driver_IRQL_Not_Less_or_equal (ndis.sys) or (jnprns.sys)


    My system has been running fine for over a year. I have had a few crashes but they have been very few and far between and the system always came right back up and everything was fine. Until last night that is. I was not even working on the computer, so it was just idle, when I noticed it had crashed. The reboot crashed and so on and so on. I am working on it right now in Safe Mode. That is the only thing that will boot.

    I dont have a clue what to do now. I have tried a system restore and that did not work. I have just downloaded a new iso of Windows 10 thinking that I will have to reinstall, but I don't want to. I am hoping someone can give me a clue what to try next.
      My ComputerSystem Spec
  2.    10 May 2016 #2
    Join Date : May 2016
    Posts : 4
    Windows 10 Pro

    I had the same BSOD referencing jnprns.sys last night. For what it is worth, removing jnprns.sys from C:\Windows\System32\Drivers did stop the BSOD and let me boot up. However, Juniper Pulse Secure now doesn't secure the connection, and no number of uninstalls, reinstalls, and reboots has fixed it. It is a work in progress, but maybe that will help you at least get a foothold.
      My ComputerSystem Spec
  3.    10 May 2016 #3
    Join Date : May 2016
    Posts : 1
    Windows 10

    Quote Originally Posted by usuee View Post
    My system has been running fine for over a year. I have had a few crashes but they have been very few and far between and the system always came right back up and everything was fine. Until last night that is. I was not even working on the computer, so it was just idle, when I noticed it had crashed. The reboot crashed and so on and so on. I am working on it right now in Safe Mode. That is the only thing that will boot.

    I dont have a clue what to do now. I have tried a system restore and that did not work. I have just downloaded a new iso of Windows 10 thinking that I will have to reinstall, but I don't want to. I am hoping someone can give me a clue what to try next.
    I JUST HAD THIS PROBLEM TODAY! Wanna know what it is? Junios Pulse, it's a VPN program I use to use while at college that screws up connection to the Internet. As long as your on airplane mode you can use your CP for anything but the Internet. Uninstall Junios Pulse which is a product of Juniper Networks, and make sure all those Pulse files are cleared. I used Ccleaner to get rid of the left over files once I uninstalled. That should do it!
      My ComputerSystem Spec
  4.    10 May 2016 #4
    Join Date : May 2016
    Posts : 4
    Windows 10 Pro

    Yes, it is a pulse driver, as I said, but VPN does more than "screw up connection to the internet." I'm going to tell our help desk that they need to get a call in to Pulse Secure (not Juniper, anymore, I've learned) because something is broken. So far they are stumped. WhoCrashed says the driver is at fault and strongly recommends updating it.
      My ComputerSystem Spec
  5.    11 May 2016 #5
    Join Date : May 2016
    Posts : 6
    Windows 10
    Thread Starter

    How do I uninstall when I can't boot in anything but safe mode? I have tried to Uninstall in safe mode and it says it has done it but when I try to boot normally I crash with the same error. Do I remove the driver while in safe mode then try booting? Will that screw up the uninstall? These kinds of errors make me feel so helpless. I work on networks for a living but windows is a whole different world.
      My ComputerSystem Spec
  6.    12 May 2016 #6
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro




    BSOD Driver_IRQL_Not_Less_or_equal (ndis.sys) or (jnprns.sys) Diagnostics Test BSOD Driver_IRQL_Not_Less_or_equal (ndis.sys) or (jnprns.sys)
     Clean boot

    Please try the following:
    • Open taskmanager
      • Go to the tab startup
      • disable everything
    • Search msconfig and open it
      • Go to the tab services
      • Check 'hide microsoft services'
      • Uncheck all other services
      • Click apply and click ok
    • Reboot if asked

    See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.
      My ComputersSystem Spec
  7.    12 May 2016 #7
    Join Date : May 2016
    Posts : 4
    Windows 10

    Any updates from the thread owner?
      My ComputerSystem Spec
  8.    12 May 2016 #8
    Join Date : May 2016
    Posts : 6
    Windows 10
    Thread Starter

    Can I do that from safe mode?
      My ComputerSystem Spec
  9.    12 May 2016 #9
    Join Date : May 2016
    Posts : 4
    Windows 10 Pro

    I ran out of time to troubleshoot this, so I reset Windows, using the troubleshooting option, which reinstalled Windows 10, and VPN works again, even after applying all the updates. I keep a fairly clean system, so reinstalling everything won't take long.

    Good luck!
      My ComputerSystem Spec
  10.    12 May 2016 #10
    Join Date : Jun 2015
    Posts : 12,972
    Windows 10 Pro

    Quote Originally Posted by usuee View Post
    Can I do that from safe mode?
    Yes you can configure a clean boot from safe mode, if it helps we know it is a driver/service at boot for sure.
      My ComputersSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Solved BSOD in NDIS.sys
I have been having this issue since 6:30 last night. It seems that my RTL driver is causing the issue. I have debugged it to the point where I know if I add a real tek lan device to my PC and enable it, the system crashes. I orignally thought the...
BSOD Crashes and Debugging
BSOD driver_irql_not_less_or_equal (ETD.SYS)
I've been getting BSODs randomly, usually a couple of days apart with the error message "driver_irql_not_less_or_equal (ETD.SYS)". I'm aware that ETD.sys refers to my touchpad drivers, and I have already downloaded the latest drivers for the...
BSOD Crashes and Debugging
BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL(ndis.sys)
Can anyone help with the above issue ? Recently done a clean install of Windows 10 but keep getting all too frequent BSOD with above message. I'm certain its a driver issue (my mobo is quite old) but all of my drivers are uptodate. Pretty sure...
BSOD Crashes and Debugging
BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL(ndis.sys) after upgrading to Win10
Hi there, I have really annoying BSOD problem. I used to run Windows 8.1 on my laptop and I believe it never crashed. After upgrading to Windows 10 I have had lot of crashes. Sometimes it just shuts down or reboots and sometimes I encounter...
BSOD Crashes and Debugging
BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL(ndis.sys)
Hi everyone, first post, long time user at the Win7 forums and now here. I recently started experiencing BSODs on my Asus UX501 laptop after upgrading from 8.1 to Win10 (thank god I didn't have to use Win8.1 for very long) I've went through...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:55.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums