Page 1 of 2 12 LastLast

  1. Joined : Mar 2015
    Dallas. TX
    Posts : 8
    Windows 10
       27 Mar 2015 #1

    BSOD when trying to updae Win10 build 9879


    I have been on Win 10 as soon as it became available as Tech Preview. I haven't had any problems until build 9879 tried to update to the next build. It goes through to setting up devices and blue screens. It will not update beyond build 9879. I was waiting to see if the newest build would work but still no good. I tried installing from the iso and from windows update. Any advice to help solve this would be great.
    I am updating the attachment with a dump now.
    Last edited by Mike Den; 27 Mar 2015 at 11:24. Reason: No Dump
      My System SpecsSystem Spec

  2.    27 Mar 2015 #2

    Your files do not contain a crash dump and the event below shows an error probably when your BSOD occurred.

    Code:
    Event[16]:
      Log Name: System
      Source: volmgr
      Date: 2014-11-12T05:45:17.408
      Event ID: 46
      Task: N/A
      Level: Error
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: WIN-9CPSKVPJOK9
      Description: 
    Crash dump initialization failed!
    Make sure your system is configured to create Crash Dumps and that your page file is not disabled

    (Read the note in the beginning of the tutorial for more information)
    Dump Files - Configure Windows to Create on BSOD - Windows 7 Help Forums

    One thing I saw is this below. This can be a normal Windows service but Malware sometimes disguises itself as this file.

    Code:
    Windows  Home Server                                       C:\Windows\Installer\{21E49794-7C13-4E84-8659-55BD378267D5}\WHSTrayApp.exe                   Public
    Also, from your hosts file
    Code:
    192.168.1.120  SERVER  #Windows Home Server#
    Again, this can be completely normal, especially if you did this, but its worth noting.

    Also, just because it can't hurt, run an SFC scan
    SFC Command - Run in Windows 10 - Windows 10 Forums

    There are other members here that can dig a little deeper than I can without a Dump file but they can chime in if they'd like.
      My System SpecsSystem Spec


  3. Joined : Mar 2015
    Dallas. TX
    Posts : 8
    Windows 10
       27 Mar 2015 #3

    gator said: View Post
    Your files do not contain a crash dump and the event below shows an error probably when your BSOD occurred.

    Code:
    Event[16]:
      Log Name: System
      Source: volmgr
      Date: 2014-11-12T05:45:17.408
      Event ID: 46
      Task: N/A
      Level: Error
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: WIN-9CPSKVPJOK9
      Description: 
    Crash dump initialization failed!
    Make sure your system is configured to create Crash Dumps and that your page file is not disabled

    (Read the note in the beginning of the tutorial for more information)
    Dump Files - Configure Windows to Create on BSOD - Windows 7 Help Forums

    One thing I saw is this below. This can be a normal Windows service but Malware sometimes disguises itself as this file.

    Code:
    Windows  Home Server                                       C:\Windows\Installer\{21E49794-7C13-4E84-8659-55BD378267D5}\WHSTrayApp.exe                   Public
    Also, from your hosts file
    Code:
    192.168.1.120  SERVER  #Windows Home Server#
    Again, this can be completely normal, especially if you did this, but its worth noting.

    Also, just because it can't hurt, run an SFC scan
    SFC Command - Run in Windows 10 - Windows 10 Forums

    There are other members here that can dig a little deeper than I can without a Dump file but they can chime in if they'd like.

    I do have a Windows Home Server on that IP Adress, Thank you I am trying everything that you mentioned I will get a dump and attach that.
      My System SpecsSystem Spec

  4.    27 Mar 2015 #4

    Good to know, those can be ignored then.

    The first error wasn't when your BSOD occurred as I looked at the time after the fact, but it's still an indication that crash dumps are not being created.

    Let us know how it goes.
      My System SpecsSystem Spec


  5. Joined : Mar 2015
    Dallas. TX
    Posts : 8
    Windows 10
       27 Mar 2015 #5

    gator said: View Post
    Your files do not contain a crash dump and the event below shows an error probably when your BSOD occurred.

    Code:
    Event[16]:
      Log Name: System
      Source: volmgr
      Date: 2014-11-12T05:45:17.408
      Event ID: 46
      Task: N/A
      Level: Error
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: WIN-9CPSKVPJOK9
      Description: 
    Crash dump initialization failed!
    Make sure your system is configured to create Crash Dumps and that your page file is not disabled

    (Read the note in the beginning of the tutorial for more information)
    Dump Files - Configure Windows to Create on BSOD - Windows 7 Help Forums

    One thing I saw is this below. This can be a normal Windows service but Malware sometimes disguises itself as this file.

    Code:
    Windows  Home Server                                       C:\Windows\Installer\{21E49794-7C13-4E84-8659-55BD378267D5}\WHSTrayApp.exe                   Public
    Also, from your hosts file
    Code:
    192.168.1.120  SERVER  #Windows Home Server#
    Again, this can be completely normal, especially if you did this, but its worth noting.

    Also, just because it can't hurt, run an SFC scan
    SFC Command - Run in Windows 10 - Windows 10 Forums

    There are other members here that can dig a little deeper than I can without a Dump file but they can chime in if they'd like.



    I have tried the suggestions you have made however I think I am in worse shape than I thought before. I was showing that my system was set up for Small Memory Dump. I changed it to Kernel and tried installing Windows 10 Build 10041 and at around the same time I got the blue screen and it rolled back to Build 9879 then I run the dm_log_collector and saw it show the crash dump initialization failed. I tried again with a complete memory dump the same thing, I got a blue screen and it rolled back to Build 9879. After that failure I tried the sfc /scannow and it said that it found corrupt files, but was unable to fix some of them. I restarted the computer and tried 3 times same result each time. Per the recommendation from that guide I then tried Dism /online /cleanup-image /restorehealth. The source files could not be found. Use the Source option to specify the location of the files that are required to restore the feature. At this point I am thinking that I will just format the drive and do a clean install unless you can recommend another method
    Last edited by Mike Den; 27 Mar 2015 at 22:40. Reason: I forgot to mention that I tried a system refresh using Build 9879, 9926 and 10041 and recieved there was a problem refreshing your pc no changes made.
      My System SpecsSystem Spec

  6.    27 Mar 2015 #6

    Mike Den said: View Post
    I have tried the suggestions you have made however I think I am in worse shape than I thought before. I was showing that my system was set up for Small Memory Dump. I changed it to Kernel and tried installing Windows 10 Build 10041 and at around the same time I got the blue screen and it rolled back to Build 9879 then I run the dm_log_collector and saw it show the crash dump initialization failed. I tried again with a complete memory dump the same thing, I got a blue screen and it rolled back to Build 9879. After that failure I tried the sfc /scannow and it said that it found corrupt files, but was unable to fix some of them. I restarted the computer and tried 3 times same result each time. Per the recommendation from that guide I then tried Dism /online /cleanup-image /restorehealth. The source files could not be found. Use the Source option to specify the location of the files that are required to restore the feature. At this point I am thinking that I will just format the drive and do a clean install unless you can recommend another method
    Can you post the CBS.log from the SFC Scan?
      My System SpecsSystem Spec


  7. Joined : Mar 2015
    Dallas. TX
    Posts : 8
    Windows 10
       28 Mar 2015 #7

    I apologize but I didn't see this and I already formatted the drive. I formatted it first using the Windows 10 options and got the blue screen. I then used Windows 7 to format the drive and install Windows 7, I then updated the Bios and the ssd firmware though they were current I redid them. Windows 7 seemed to be working perfectly. I disconnected the other hdds so it is only the ssd. I managed to get a picture this time of the bsod and it said this driver_irql_not_less_or_equal (e1i63x64.sys). I will wait before formatting anything this time in case you recommend something.
      My System SpecsSystem Spec

  8.    28 Mar 2015 #8

    The driver it references is your Intel Gigabit ethernet driver.

    This may or may not be the problem, typically the files referenced by the initial BSOD is just the service or module that was loaded at the time.

    http://www.intel.com/support/network/sb/CS-006120.htm

    Here is a thread that may be of some help (assuming the Ethernet driver is in fact that problem)
    Driver_IRQL_NOT_LESS_OR_EQUAL Error when - Microsoft Community

    Here is more information about Driver_irql_not_less_or_equal
    Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Windows Debuggers)

    Ensure you have all the latest drivers installed for your Video card, Network Card and Motherboard

    As always, we will need the actual dumps to help much further.
      My System SpecsSystem Spec


  9. Joined : Mar 2015
    Dallas. TX
    Posts : 8
    Windows 10
       28 Mar 2015 #9

    Thank you so much for the response I will check those links. As I said it only happens when I am installing the newer builds 9926,10041. When I had build number 9879 it worked properly and I did not encounter the blue screen. It is only when I am trying to update to one of the new builds. And it gets hung up towards the end of it when I am setting up devices, so it may be the driver you are referring to. I will try the duel boot and load the driver using windows 7 later today.
      My System SpecsSystem Spec


  10. Joined : Mar 2015
    Dallas. TX
    Posts : 8
    Windows 10
       29 Mar 2015 #10

    gator said: View Post
    The driver it references is your Intel Gigabit ethernet driver.

    This may or may not be the problem, typically the files referenced by the initial BSOD is just the service or module that was loaded at the time.

    http://www.intel.com/support/network/sb/CS-006120.htm

    Here is a thread that may be of some help (assuming the Ethernet driver is in fact that problem)
    Driver_IRQL_NOT_LESS_OR_EQUAL Error when - Microsoft Community

    Here is more information about Driver_irql_not_less_or_equal
    Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Windows Debuggers)

    Ensure you have all the latest drivers installed for your Video card, Network Card and Motherboard

    As always, we will need the actual dumps to help much further.


    Thank you I think that did the trick I followed the link that explained about the driver. I dual booted and copied the driver to the the Win10 install rebooted and it went right past setting up devices and I was able to sign on to Windows 10 build 10041 for the first time. I am going to restore the Win10 build 9879 with all my files and programs and try to install build 10041 over it using the new trick. I thank you so much for the time and effort I do really appreciate it.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
How to install Win10 on Dell XPS 410 without BSOD using BIOS 'Raid On'
I've have an 8 year old Dell XPS 410 that has had a number of upgrades, to include a new video card and solid state drive. It is currently running great with Win7 but I am probably going to take MS up on their offer for a free upgrade and go with...
Installation and Setup
Solved Activate Build 9879
A week or so ago I installed Build 9879 of W 10 TP and have tried every day to activate it through PC Settings. I keep getting a message saying, "Windows can't activate. Try again later." Should I be concerned? What can I do to activate it? ...
Windows Updates and Activation
Windows 10 Build 9879 - Last Build of this Year
Hey All! Yes, I've been away and still not well but, have received a email from Gabe Aul @MS today and would like to share it with you. What made me post this is the fact that we are not getting any new builds till January. Just thought I'd let...
Windows 10 News
build 9879
so there has been a new update and we have all been fooled by microsoft thinking it is only on a tuesday we will receive new builds to test. a pleasant surprise when i woke up this morning. in the new build i have noticed they have moved the...
Windows Insider
OneDrive in build 9879
This is a mess imo! Before you had the OneDrive app and you had a OneDrive folder that you saw in File Explorer. Now only the OneDrive folder is there and it only shows those files/folders that are available online and offline. While that is...
Software and Apps
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:33.
Find Us
Twitter Facebook Google+



Windows 10 Forums