Attachment 78825
Happens while i'm playing any kind of video game. The game will freeze and there will be an audio loop for about 1 second until my screen goes black and goes to a blue screen.
On other occasions, the same thing will happen but the computer will black screen and restart and will leave no minidump file.
Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.Code:BugCheck D1, {ffffe0010b2b9bac, 2, 0, fffff801b2ce2f43} *** WARNING: Unable to verify checksum for win32k.sys Probably caused by : memory_corruption Followup: memory_corruption ---------
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Take a camera snap of the memtest86+ window before closing the program. Let us see it.
Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums
Stress test the Graphics Card using Furmark.Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.
After seeing the results of these two tests, we will decide our next steps.
I ran FurMark, no errors occurred.
I ran memtest overnight it ran 11 passes with no errors.
All screenshots were provided.
Thanks for the reply, please get back to me soon.
Its good that the hardware tests are passed nicely.
Next step, enable Driver Verifier to monitor the drivers.Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.
How Can we know that DV is enabled:
It will make the system bit of slow, laggy.
Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.
If there is no points, make a System Restore Point manually before enabling DV.
Let us know the results, with the subsequent crash dumps, if any.Tip
- If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
- If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.
I got DRIVER_VERIFIER_DETECTED_VIOLATION with the driver being amd_xata.sys.
Thanks!
Quote