Windows 10: mv91xx.sys always causes a crash .. Solved

  1.    06 May 2016 #1

    mv91xx.sys always causes a crash ..


    Crash dump directory: C:\WINDOWS\Minidump

    Crash dumps are enabled on your computer.


    Any ideas , thanks people ..



    On Fri 5/6/2016 3:13:50 PM GMT your computer crashed

    crash dump file: C:\WINDOWS\Minidump\050616-14546-01.dmp
    This was probably caused by the following module: mv91xx.sys (mv91xx+0x2FEE2)
    Bugcheck code: 0x1E (0xFFFFFFFF80000003, 0xFFFFF800E6FCFEE1, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\WINDOWS\system32\drivers\mv91xx.sys
    product: Marvell magni
    company: Marvell Semiconductor, Inc.
    description: Marvell magni Windows Driver
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: mv91xx.sys (Marvell magni Windows Driver, Marvell Semiconductor, Inc.).
    Google query: Marvell Semiconductor, Inc. KMODE_EXCEPTION_NOT_HANDLED
      My ComputerSystem Spec


  2. Posts : 12,499
    Windows 10 Pro
       07 May 2016 #2

    Hi Total,

    I suggest that you change the storage controller to Intel, for equal performance you want to have the grey ports, as the Marvell controllers aren't very stable.
      My ComputersSystem Spec

  3.    07 May 2016 #3

    Thanks for the info - So just install the intel drivers , I believe that my board used marvell .
      My ComputerSystem Spec


  4. Posts : 12,499
    Windows 10 Pro
       07 May 2016 #4

    You need to change your cabling, they are connected to the Marvell controller, but you need to connect them to an Intel controller.
    Attachment 78671
      My ComputersSystem Spec

  5.    08 May 2016 #5

    Thanks , and will give it a try ..
      My ComputerSystem Spec


 

Related Threads
crash in Software and Apps
wondershare data recovery quit unexpectedly.. Will not run..I have the same problem with Aomei partition assistant..
Solved BSOD KMODE_Exception_Not_Handled (mv91xx.sys) in BSOD Crashes and Debugging
BSOD with above error code happening. Report attached. Original topic can be found https://www.tenforums.com/bsod-crashes-debugging/26981-bsod-kmode_exception_not_handled-mv91xx-sys.html System specs are in my profile. Upgraded hard drive since...
BSOD KMODE_Exception_Not_Handled (mv91xx.sys) in BSOD Crashes and Debugging
Repeatedly experiencing the above BSOD. Started happening after upgrading from Windows 7 to 10. I initially thought I'd resolved it by downloading the latest Marvell driver but it appears the BSOD just didn't trigger for a week or two. Would...
Windows 10 has been working like a Dream but now its turned into a nightmare! Constantly Crashing after an hour of use, has anyone else had this problem, as its been working fine for months.
I recently upgraded my htpc from 8.1 pro to Win 10 pro. I have had multiple BSOD since then. 4 were for store exception not handled and the last 2 were for kmode exception not handled mv91xx.sys. Please advise.

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:22.
Find Us