Page 2 of 8 FirstFirst 1234 ... LastLast

  1. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       05 May 2016 #11

    Need to sleep now, will get back to you tomorrow, thanks for the help so far!
      My System SpecsSystem Spec


  2. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       06 May 2016 #12

    Ran sfc/scannow (after running it last night) after turning pc on, and got told "Windows Resource Protection could not perform the requested operation".
    I will re run it now?
    Could it be that I turned it off last night, and then waited overnight before trying again?
    Thanks for the help
      My System SpecsSystem Spec


  3. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 May 2016 #13

    Run following command in an admin command prompt
    Code:
    DISM /Online /Cleanup-Image /ScanHealth
      My System SpecsSystem Spec


  4. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       06 May 2016 #14

    When I try running that it got stuck at 20%, so I restarted it and it now is just displaying Image version: 10.0.10586.0 (rest of pc is working fine)
      My System SpecsSystem Spec


  5. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       06 May 2016 #15

    Ok it has completed now, No component store corruption detected
    the operation complete successfully
    What would you recommend next?
      My System SpecsSystem Spec


  6. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 May 2016 #16

    When I try running that it got stuck at 20%,
    I should've mentioned that with some DISM commands it looks like the command is stuck at some point, but in reality there is no problem. It can take up to a few hours before it finishes and until the last few seconds may look like it is stuck at 20% but then suddenly finishes. It fortunately doesn't cause any problem when such a scan is interrupted.

    What would you recommend next?
    Because we've made a few changes I'd like to know if the problem still persists
      My System SpecsSystem Spec


  7. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       06 May 2016 #17

    Will let you know then thanks
      My System SpecsSystem Spec


  8. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       07 May 2016 #18

    Frooze within 10 mins of turning on today
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    Posts : 10,906
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       07 May 2016 #19

    If you've done any of below suggestions, just try it again and let me know what the results are.




    Multiple Crashes, Freezes and BSOD's Diagnostics Test Multiple Crashes, Freezes and BSOD's
     Clean boot

    Please try the following:
    • Open taskmanager
      • Go to the tab startup
      • disable everything

    • Search msconfig and open it
      • Go to the tab services
      • Check 'hide microsoft services'
      • Uncheck all other services
      • Click apply and click ok

    • Reboot if asked

    See if the problem persist, if the problem does not persist enable in the startup tab in taskmanager 1 item and in the services tab in msconfig also 1 service, reboot and see if the problem persist. Keep doing this until you find the culprit or there is nothing left.
    If the problem still persist, try booting in safe mode and see if the problem still persist




    Multiple Crashes, Freezes and BSOD's Diagnostics Test Multiple Crashes, Freezes and BSOD's
     HDD TEST

    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests
    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Post screenshots/photos of the test results

    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to
    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Best is to make screenshots/photos of these test results too.
      My System SpecsSystem Spec


  10. Joined : May 2016
    Posts : 42
    Microsoft Windows 10 Home 64-bit 10586 Multiprocessor Free
       07 May 2016 #20

    Ok so,
    I did all that, it didnt ask for reboot, and has been working fine since (6+ hours)
    Ran the sea tools and it passed fine.
    ChkDsk was also fine.
    HDTune turned up no errors.
    I have attached the screenshots from the health and benchmark (something opened part way through the benchmark and started reading hence the decrease).
    Thanks
    Attachment 78637Attachment 78638
      My System SpecsSystem Spec


 
Page 2 of 8 FirstFirst 1234 ... LastLast


Similar Threads
Thread Forum
Dell XPS 8700, PCASp60, NIDS6 & multiple BSOD crashes per day
Hello – Not sure if I am right at this place… I bought a Dell XPS8700 desktop in late 2014. I started out with Win 8.0 Home. From the very beginning, I had BSOD crashes. I updated to Win 8.1 Home, Win 8.1 Pro and now to Win 10 Pro, hoping...
BSOD Crashes and Debugging
Multiple freezes and crashes - no real trigger
Hello My PC has recently started to freeze and reboot itsself randomly, I can't figure out what is causing the issue since there are no error messages etc after. I have uploaded the diagnostics dump files
BSOD Crashes and Debugging
Multiple BSOD crashes every week
Hi everyone, I've had a look at some of the forums which seemed to have the same problem as me (perhaps for different/same reasons). Since updating the BIOS manually 3 weeks ago, I've been having multiple BSOD and each time the reason appears to...
BSOD Crashes and Debugging
BSOD multiple crashes last 4 mos. Occurs no matter what activity
So ever since I upgraded to Windows 10 like everyone else, I've been getting consistent errors from my machine. I have simply been uninstalling the device and driver each time I start the pc. Why does it keep reinstalling itself. And soon as I...
BSOD Crashes and Debugging
Solved Encountering random game crashes and multiple different BSOD
I have been encountering random game crashes and different BSOD messages for the past month at a high rate. This mainly happens when playing 'Smite' but happens frequently with other games and sometimes when browsing on Chrome. 45120
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:06.
Find Us
Twitter Facebook Google+



Windows 10 Forums