New
#61
A reminder of how to perform a clean boot :)
Please try the following:
- Open taskmanager
- Go to the tab startup
- disable everything
- Search msconfig and open it
- Go to the tab services
- Check 'hide microsoft services'
- Uncheck all other services
- Click apply and click ok
- Reboot if asked, if a reboot isn't requested then something isn't done right.
Alright this just happened. I even was in a clean boot.. Attachment 81320
Could you run MemTest86+ again please, if it doesn't find any problems it is a driver issue (again) and I think that we then might go into a loop for catching drivers and I would like to prevent that with suggesting a clean installation.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
I would like you to perform a proper one, but that will erase everything on your hard drive so I recommend to backup all data you do NOT want to loose to an external HDD.
Just a FYI in case you don't know, a clean install won't cause any problem with activation :)