Windows 10: BSOD CRITICAL_PROCESS_DIED w/error 0xc000000e on reboot Solved

Page 3 of 6 FirstFirst 12345 ... LastLast

  1. Posts : 12,491
    Windows 10 Pro
       15 Jun 2016 #21

    Please change the boot order so your boot drive is the first option, set the CD-ROM as second boot option.
      My ComputersSystem Spec

  2.    15 Jun 2016 #22

    axe0 said: View Post
    Please change the boot order so your boot drive is the first option, set the CD-ROM as second boot option.
    Good morning Axe0. I changed the boot order to 1)HDD, 2)CD-ROM, 3)[Disabled]. It didn't change anything. With the "Valiant" drive in the dock, Windows boots OK. With the Valiant drive out of the dock, or the dock turned off, Windows throws error 0xc00000e while booting. Windows doesn't even display the small cyan "Windows" logo...it goes straight from the BIOS banner screen to the BSOD.

    Switching the order of the eSATA drives on the adapter also does not change anything--it still crashes if that Valiant drive is missing and runs OK if Valiant is connected.

    NOTE: Connecting Valiant through a SATA/USB adapter doesn't work--the drive isn't recognized before Windows starts to load at which point it throws the 0xc000000e BSOD.

    There is a LOT of activity on this Valiant drive both when Windows is starting and when shutting down. There is some file on that drive that my running Windows configuration references and it is trying to be accessed by winload.exe early in the startup phase. Is there any clue in the Registry or the dumps as to what this file is?

    Is there some sort of boot logging/tracing that can be enabled?

    Thanks.

    Cheers!
      My ComputerSystem Spec


  3. Posts : 12,491
    Windows 10 Pro
       15 Jun 2016 #23

    The zips you uploaded do not contain dumps.

    Winload.exe reads the HKLM/SYSTEM hive, ntoskrnl.exe and boot device drivers into the physical memory near the start of the boot process before virtual memory paging is enabled.

    Please format the recovery partition on the Valiant drive
      My ComputersSystem Spec

  4.    15 Jun 2016 #24

    axe0 said: View Post
    The zips you uploaded do not contain dumps.


    Winload.exe reads the HKLM/SYSTEM hive, ntoskrnl.exe and boot device drivers into the physical memory near the start of the boot process before virtual memory paging is enabled.


    Please format the recovery partition on the Valiant drive

    OK, will do but I will need instructions for doing it as Disk Management provides no options to operate on any of the recovery partitions.

    Thanks.

    Cheers!
      My ComputerSystem Spec


  5. Posts : 12,491
    Windows 10 Pro
       15 Jun 2016 #25

    How to delete a volume:
    In an admin command prompt enter following commands
    diskpart
    list volume
    delete volume {volume number}
    Attachment 85256
      My ComputersSystem Spec

  6.    15 Jun 2016 #26

    axe0 said: View Post
    How to delete a volume:
    In an admin command prompt enter following commands
    diskpart
    list volume
    delete volume {volume number}
    Attachment 85256
    Hmmm, here's what I get....
    Attachment 85262

    The "delete volume 13" command throws an error. If I first say:
    select volume 13
    delete volume

    then diskpart crashes. (Diskpart has stopped working... Windows is looking for a solution...)
      My ComputerSystem Spec


  7. Posts : 12,491
    Windows 10 Pro
       16 Jun 2016 #27

    Another option is to use Windows installer, delete the partition before installing and then abort the setup.
      My ComputersSystem Spec

  8.    23 Jun 2016 #28

    axe0 said: View Post
    Another option is to use Windows installer, delete the partition before installing and then abort the setup.
    OK, I'll try that. Sorry for the delay--busy week.
      My ComputerSystem Spec

  9.    23 Jun 2016 #29

    axe0 said: View Post
    Another option is to use Windows installer, delete the partition before installing and then abort the setup.
    OK, the recovery partition on Valiant has been deleted; now it shows as unallocated space in Disk Management. Windows still throws 0xc000000e if I boot without Valiant connected.
      My ComputerSystem Spec


  10. Posts : 12,491
    Windows 10 Pro
       23 Jun 2016 #30

    Do you have this hive that you loaded in the registry?
      My ComputersSystem Spec


 
Page 3 of 6 FirstFirst 12345 ... LastLast

Related Threads
Solved error code 0xc000000e in General Support
how can I get out of this screen shows RECOVERY says to insert installation media I tried the latest install dvd from techbench says to press f8 will not work it is missing windows/system32/winload.exe I have searched and tried some of the tips...
Solved BSOD ERROR - Critical_Process_Died in BSOD Crashes and Debugging
I keep getting a bsod error that says "critical_process_died". I don't know too much about bsod errors so I'm not really sure on how to fix this. I've ran the sfc.exe/scannow command and it said it found corrupted files, but couldn't fix them. I...
About every hour I get a BSOD with the error, Critical_Process_Died. The BSOD completes "gathering info" and when it gets to 100% it does not restart. The only processes I have been running are chrome and trying to do malwarebytes scan. I checked...
Solved BSOD Critical_Process_Died in BSOD Crashes and Debugging
The OS (win10Pro) is an upgrade from Win7Ultimate and this BSOD issue only started happening this morning. Unfortunately, my last image is from Friday so I'm not sure that will be of any help either. The diagnostic file is attached. One thing that...
Computer was running fine then I decided to update to the newest driver since it said it was more stable-had an error during installation...tdr error.... then when I rebooted it kept giving me errors like dx error and couldn't get to desktop kept...

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:16.
Find Us